Get matched with top stone restoration & polishing pros in Port Angeles, WA

"We hired Granite & Marble for our kitchen re-do after visiting and getting quotes from two vendors including them. Lowest cost was not our primary criterion, but we wanted good quality work and a responsive vendor. They seemed to have top notch stone cutting technologies and everyone we dealt with was responsive. Ed Watson (I believe an owner) provided an initial estimate right away based upon my measurements, even before we visited their showroom. Once we visited the showroom Glenn helped my wife and myself, answering questions about the various quartz options, looking up approximate costs for third party stone providers. We visited twice in Kent and settled on a quartz that was available from manufacturer LG Haus who had a warehouse in an office park just across the 4 lane road from Granite and Marble (btw, LG Haus makes these in the U.S. though they are a Korean company. LG Haus was very accommodating in letting us see the various quartz stones in their warehouse). Once we selected the quartz & settled on a sink (we selected a 16 gauge stainless double available from Granite & Marble), and bought our new stovetop (from Lowes) and new faucet (chrome finish stainless all-in-one from Kohler), Glenn at G&M provided our final quote. As soon as we had our original stovetop removed (vendor service provided by Lowes), Steve at G&M finalized the contract (50% prepayment) and scheduled the template measurement date and installation date. The template specialist Eugene came to our home on the appointed date where he precisely measured all dimensions and entered them into an electronic template tool. He helpfully answered our questions and also asked our preferences about several details concerning the counter installation. The installation was scheduled about a week after the template measurement, but it ended up being delayed a couple business days because the machinist who was working on the slabs the prior afternoon noticed a scratch on one of the slabs and halted work until it could be replaced by the slab vendor. Our only complaint is that we were not notified of this on the original install date and we had to call them to find out what was going on. Apparently an internal communication failure at G&M caused this, but none-the-less we were glad that they took the initiative to replace the defective slab. The rescheduling was not a great inconvenience for us (because we are usually at home) but might be for someone who has to take time off work on installation day. On the installation date, installers Javier & Javier (father/son) arrived and professionally executed the removal of the old counters and the installation of the new ones, taking appropriate care to ensure that no collateral damage to the existing cabinets occurred. Both of them helpfully answered our questions and also asked us if we had any preferences about relevant installation details. All in all we are very happy about the way the project turned out, and would strongly consider G&M for future work. Our only caution to a prospective client would be to telephone confirm appointments in the morning of the day-of scheduled visits for template and installation work."

"Amazing.  We made many trips to "visit" the slabs we could choose from.  We provided a sketch of what we wanted to do, and they reserved the piece we chose.  When the cabinets were ready they came to our house to get an exact measurement.  They have state of the art equipment, actually surveying each area with their electronic equipment to get it perfect. We deviated from our original plan at this meeting and they were able to accommodate our changes.   When they had the pattern ready we went to their showroom where they had the pattern laid out over our granite so we could see just how it would be cut for each piece.  At every step of the way each person was professional, punctual, and seemed happy to be doing the work.  It was a delightful experience and we have totally enjoyed the resulting kitchen cabinets. <br />"

"Dan was AMAZING to work with.  We are fortunate that we are reasonably close to his home and he was very gracious to allow us to come by to meet him and see the floor in his house - Brazilian Teak (Cumaru)- and we fell in love immediately.  So, we changed our minds from Tigerwood to Cumaru and his product is just EXCELLENT.  It also has a nice 30-35% sheen instead of a semi-gloss - so the flooring is that much more rich looking. <br> <br>Unlike most people, Dan's boards come up to 7' long, which gives a much nicer look, especially if one picks a wood with a lot of variation. Most companies only have up to 4' lengths.  That would look like a "patchwork" if the flooring isn't consistent.  We also got really nice 4" wide boards - they look just beautiful. <br> <br>Note: you need to give adequate time for acclimation.  The more the better!  Don't try and rush it - it won't be Dan's fault if you install this stuff too quickly! <br>"

"I was upset that there was more than I initially thigh wrong with my car but they were helpful and got me through the process as quickly and painlessly as possible! <br />"

"Everything from beginning to end was great! Very impressed with the quality, installation, timeliness, and professionalism. VERY happy with the whole job."

"I have used several Granite Gold products and like their effectiveness because they do what they are supposed to do. No strong fumes or irritating skin problems. The granite counter top daily cleaner and polish are so easy to use (spay it on and wipe with a paper towel) to keep all your stone products clean and shiny. I was surprised to see how effective the grout cleaner is. I sprayed it on some dirty tire floors in the bathroom and let it sit for a couple of minutes. Then I went over it with the scrub brush they provide. It looked clean then, but when it dried, it was much brighter. This is a 40 Year old bathroom tile floor pictured. Granite Gold also provides excellent professional support."

"In retrospect I am quite happy that I took the path I did as there were several unexpected developments and/or requirements that I had asked for that were "unexecutable" during the course of construction that we were able to fix on the fly. I was very happy with Scott's attention to detail during the course of construction and his quality of work far surpassed most other residential contractors I have dealt with. One of the first challenges was trying to get a permit to do the work. It turned out that the property I purchased had a barn on it that had never had a permit issued for its construction. (Not disclosed in the seller disclosure). As a result the issuance of a permit was delayed a bit until we reached an agreement with the county that we would retroactively get a permit for the structure and do any required fixes that a structural engineer determined were necessary. I ended up having to get Scott to do some additional concrete work on the barn foundations to make the county happy and hired a separate contractor to do some of the wood structural work to keep Scott focused on getting the house completed on time. I am a retired engineer with some experience in doing construction projects. Scott would be the first to tell you that I am a somewhat uncompromising taskmaster and I really appreciated the fact that Scott would push back based on his extensive experience in what works in home construction. We made several adjustments to the layout of the home as we went along and we had a good give and take on what I was adding vs items that were abandoned for a credit and the overall cost impact. The only issue I had with our project centered on critical path planning. For those not familiar with large projects this is the planning that determines what work that needs to be done today (eg: material ordering) to ensure that the work we are going to be doing in the next several weeks goes smoothly. This improved as we got through the project and at the end we ended up getting it done in the agreed time frame (excluding the delay in getting the permit at the outset of the project). I would certainly recommend Scott to anyone looking for a quality contractor to do either a renovation or construction project."

"Surface Link Corp is the only company that will do the kind of work that we wanted. Everything went well. They came out when they were supposed to and they did a good job. I think they were expensive but there was no one else to do the work."

"On time and within budget"