Get matched with top electrical wiring or panel upgrade pros in Rosemount, MN

"Joel provided great service. It was a small project, but he took the time to explain my options on how far I wanted to go with my needs. I paid for the service call and an hour to complete the disconnect of old wiring and testing of another circuit and ceiling light fixed in place. He explained the new electrical codes to be followed if I wanted to add a new outlet."

"Nik was a fantastic help in both designing and installing a number of light fixtures and outlets in my semi-finished basement. It totally transformed the space and made it very livable. He has extensive knowledge and foresight about how I would use the space and where to put things and made a change when I did not end up liking one placement. He also helped to wire in a dishwasher and install some motion sensor lighting outside. I have several more projects I have gotten excited about, knowing I have found an electrician that I can trust, provides excellent customer service and is also really flexible and easy-going. I would recommend St. Croix Electric to anyone and everyone. I also like that it is a small family-owned business for two generations. A business does not stay in operation that long unless they do something right."

"Dan was incredibly helpful with getting our circuit panel upgraded on a short schedule."

"I received a prompt response to my request for an estimate. During the initial visit, Mike gave me a thorough, complete, and prompt estimate educating me on my current electrical system and the work to be done. Bob was responsive, friendly, flexible and easy to work with during the scheduling and billing process. Joe and Brian were friendly and professional explaining the work and answering all my questions. They communicated clearly through the whole process. Joe and Brian worked so hard to upgrade our electrical panel from fuses to breakers. They also installed an outdoor meter on the side of our house. They were very thorough and took their time to make sure the work was done right. They worked from 8 am to 6ish pm the first day. Then they came back the next morning to finish the work once again making sure everything was done properly. I even got estimates for more electrical work we need to get done! I highly recommend Randy's Electric and the professionals I referred to above."

"Robinhood Electric was a great experience! I needed a very last minute job done and he was able to come same day, exceeding expectations. He was a great guy to work with and would reccomend him for some reliable and fast work."

"As a new homeowner I feel like I have been put through the ringer to try and find companies (large or small) who are honest, fair, responsive, and helpful. Iâ m so glad I found Finch Home Solutions! Cody the owner came to my home to replace a couple of outdoor outlets that were old and the plug had to be â just rightâ to have anything work. He also replaced an outlet in the bathroom that was clicking when specific items were plugged in. While here he did an examination of my electric panel and didnâ t try to upsell me to replace it now, even though it is a bit older but in great shape. I had Finch Home Solutions come out a second time and given we had a large storm the night before they had an emergency call to attend to the morning of my appointment. The office made sure to call me to let me know what was happening, when to expect my appointment to take place, and offered to move it if needed. I appreciated the thorough communication to keep me in the loop. When Drew & Cullen arrived they were both friendly, prompt to find the issue, and even helped weigh in/provide feedback on some light fixtures Iâ d like to eventually replace. Iâ ve already recommended this company to a few of my friends who are new homeowners as we all seem to be struggling to find reliable and helpful folks to make upgrades in our homes. Definitely recommend Finch Home Solutions and theyâ ll be my go-to for all electrical work needed in the future."

"We had a wonderful experience with Everlight Solar. Nick did a great job of going through and explaining everything and how it would all work. The crew does a fantastic job and they do it quickly. They even suggested a placement change of the panels on the spot to maximize my production. One thing I wish is that I had added a couple more panels to the system beyond what they recommended- just to get that extra going back into the grid. I have seen the cost savings in just one month on my utility bill. More sun would be better but I did record 74% less consumption for Sept. than the previous year! The days are getting shorter, so have to take that into account, I look forward to next year and seeing just how much more it can produce. I recommend Everlight Solar to anyone who is looking at installing a system. Feel free to use me as a referral too..."

"Excellent. The whole team is respectful and left the work areas very clean. They do the little things that separate themselves from others extremely well. For the panel there was a follow-up need Jason, the owner, came back out to our home at 10PM. And for the light fixtures Parker noticed we had a dimmer on a switch that wasn't connected to a dimmable light, a fire hazard, so he put a new switch in for us, something that wasn't on our radar. We will call them for any future electrical needs."

"We ve had hero service or plumbing a few times and it s been above and beyond what we expected with regard to customer service being very professional down to earth as John was a great listener listening to each and every symptom we described allowing him to successfully Troubleshoot our problem. So thankful for the services we received from John at hero plumbing twice now and we re having another appointment scheduled for tomorrow for a turn valve repair from hero plumbing as well. Thank you hero plumbing and thank you John for the great service!"

"I have generally a positive impression of their work, as the unit is working extremely well. Their presentation was first rate, prices competitive, they had good references and had installed a lot of geothermal units. Their workers were courteous, worked efficiently, seemed competent, cleaned up well after themselves, and would go the "extra mile" when something didn't seem to be working correctly. However there are some caveats I would share with potential customers. First, they are often overly optimistic as to how long it will take them to do things. Initially I was told that the whole installation would take two days, including drilling 3 holes 200 feet deep. The drilling and installation actually took a week. When I mentioned the 2-day figure to the head driller he laughed. During the drilling phase (about 4 days) we were disconnected from electricity, phones and cable. When the drilling ended late on a Friday, I had to pay a $300 after-hours service fee to the local utility to get hooked so as not to go another 3 days without power. On the plus side, a Freier's electrician did come out on his own after hours to get our phone and cable reconnected. The Freier's representative also made a mistake on the survey they submitted to get a DNR permit for the well drilling. This led to a delay of the project from March until June. When stuff wasn't going right, the company was reluctant to let me know what was going on. Often I had to call and ask for news. For example, when told the team was going to be up to my house first thing in the morning, they didn't arrive. When I called the company to find out when to expect them, I was told "they're on their way". Hours later (we are a 15 minute drive away from their shop) I called again I was told, "We don't know where our teams are". Turns out they were on an emergency call, and got to my place by early afternoon. When choosing a geothermal unit, one of my questions had to do with the filters - how to get them, how easy was it to change them, and so forth. The Freier's representative told me they were widely available at plumbing supply stores and cost about $10. Turns out they are non-standard filters which no body seems to stock and have to be specially ordered. Costs quoted me now range from $14 to $54 a filter (the last price as ordered from the company that makes the furnace). Turns out Freiers' didn't even have any of the filters in stock. I have ordered some from them and was told it would take one or two weeks to get them. Still waiting at 4+ weeks for a "special order". Since the leader of the installation team told me they might need to be changed as frequently as once a month, this promises to be an ongoing problem."