Get matched with top concrete flatwork repair & resurface pros in Santa Ysabel, CA

"I recently hired Just Stamping Concrete for a landscaping project, and I must say that I was blown away by their work. Their team is highly skilled and knowledgeable, and they truly transformed my outdoor space into a beautiful oasis."

"Their technician did an excellent inspection job: he crawled under the house, took photos, and did a very precise measurement of the house level. However, Saber doesn't replace steel girders under what are called "Princess homes". They can do jack replacement and leveling, but first I need a rusted steel girder replaced, for which I must hire a different foundation contractor."

"PBH did several house projects for me, including installing gutters and fancy fascia under my roof eaves. The work was perfect and all the workmen were polite, neat and clearly dedicated to making a perfect finished product. When they left, they cleaned up my entire yard. I would definitely rehire this company!"

We are committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.\n

"They wouldn't do it without an additional charge. The deal was misleading. 
I got a refund through Angie's List."

"The team was terrific, they were on time, and very responsive, they did a great work, and the quality of the work was high and we have approved it."

"He was very professional, he did a great job and he had a good price."

"Great job on the house, they had everything installed in 3 days and once the LAWP Panel from the power company and hooked everything, then everything was working well. they took care of all the paper works and documentation, and everything was done quickly. Best price available for us."

"

I purchased a big deal for this service and it worked out good. I just did not really jell with the designer so I did not use them. I did not like his ideas and did not like how they threw out the dollar amount for the project without knowing what I wanted to do. They are good, but it just did not work for me.

"

"To start, the requirement to strictly adhere to all manufacturers' specifications and building codes for this re-roofing job was stringent, for I monitored the crew's work from start to finish. Tear-Off: After two weeks delay, the actual work started with SW Roof TearOff removing the old shingles. A little bump here, as there were a lot of old nails sticking out of the roof deck, pieces of tar paper still stuck to the deck, a cracked fascia board (which they quickly blamed the old wood) and a broken vent pipe after they're done. Bad wood replacement: Decent work by Excalibur Roofing crew, but definitely no precision carpentry, because of the crew did not possess precision equipment. Roof shingles installation: New underlayment / peel-n-stick installation was acceptable, again under my supervision. Some sections of the Drip-edge installation had to be re-worked. I had to request careful staging of the shingle rows, as the crew did not initially take into account the out-of-square characteristics of each roof section. The nailing of shingles was just acceptable, as I had the crew remove quite a few nails that were either shot-crooked or too deep into the shingle; in this respect, the crew, although experienced, was rushing the shingle-nailing job with less than perfect nail guns. The installed vents were about 0.75 in. off the pre-cut holes in the plywood; again, something that could have been prevented with a little extra time and care. The trimming of shingles along the rakes was sloppy; the 0.25 in. shingle overhang was in itself a challenge, and yet, the crew had to resort to scissors because of dull cutting blades! The same thing happened to the trimming of the shingles along the valley lines. The crew was very cooperative, but Erik never showed up during any stage of the installation (I guess he was counting on me to take his place). In the end, the finished roof looks pretty good from far away and has been watertight for two years; the actual price paid to Excalibur Roofing Services, Inc was somewhat high, when taking into account the time I had to spend checking each stage of the project. December 2018 Update: I discovered that a Decoridge cap came loose at the eave’s end of the hip ridge, hanging with just one nail (the other nail was shot-crooked and never penetrated the plywood). I then called Excalibur Roofing Services, Inc to request warranty service, only to be told by Mike that the company is currently out-of-business. It does look like this company’s 10-year workmanship warranty for my roof is down the drain; so, I ended up re-nailing the loose cap and seal it myself."