Get matched with top wrought iron fence repairers or welders in Sasabe, AZ

"Jim was great. He came to my property and gave me a bid same day and the fence was installed 3 days later! The fence looks amazing."

"Tucson had a huge storm July 14th and a shared fence blew down. Josh was quick to respond the next day and within an hour was out to see what needed to be done and was out the next day to repair. Very accommodating and scheduled us in to fit our needs as this was needing to be done quickly as my house was being sold that week and much pressure to get things done quickly ."

"The owner agreed that the work would be done by a specified date, but it was only completed a month late after several phone calls.
The gate that was installed is excellent. For the fence, however, plastic plugs were used instead of metal ones on the hollow uprights that project above the top rail, and one of them has already broken off.
If you decide to use this company, make sure you get a complete description of the materials that will be used. Also, if you intend to use the Angie's list coupon, make sure the specified discount is shown on the initial estimate. I presented the coupon after the work was done and the owner refused to honor it, claiming it was already factored into the price.
"

"Initial contact with Acra was in mid November and went relatively smoothly.  My wife and I made our wants known and received a ball park estimate of the cost.   We left a down payment of approximately half the cost for the project as it was needed to start purchasing supplies.  This is normal and was expected. 
Project start date was set for the end of the first week in January to allow for holidays to pass without rushing any of the subcontractors.  The only problem we encountered is that Acra wanted to rush the tear out before any of  the actual installation was really ready.  This made it difficult on my wife and I as we intended to live in the house while the work proceeded.  Consequently we were without any sinks in the house except for the deep sink in the garage for a period of three days.  I believe that the work could have been staggered or compressed so as to prevent this lag time. 
There were six sub contractors involved besides Acra's own tear out and touch up technicians.  All of the subcontractors and the Acra technicians performed admirably.  We were very satisfied with their work.  This involved the following:
-  Electrical: Addition of electrical outlet, changing and addition of lighting fixtures and switching for same.
-  Plumbing: Changing of water heater and addition of hot water recirculating system, Installation of four sinks in the two bathrooms and kitchen, installation of new toilets and new faucets and fixtures in same.
-  Granite suppliers:  Providing three acceptable slabs of 3 cm Creama de Bordeau Brazilian Granite.
-  Granite fabricators:  Measuring, cutting, polishing and installation of counters in kitchen and two bathrooms.
-  Tile installers:  Install back splash in kitchen.
-  Mirror fabricators:  Installation of three custom mirrors in the two bathrooms.
Of all these the only problems we ran into is with the materials supplied by the buyers at Acra as follows.
-   One of the bathroom sinks initially ordered was broken and not noticed until the day it had to be delivered tothe granite fabricators.  This could have caused a major delay but Acra owned up and replaced with better sinks purchased in Tucson.
-   The wire baskets ordered for the kitchen sink were ordered in the wrong size.  This did not cause a delay in the work but is inconvenient for us as the sinks are not protected from scratches while the new baskets arrive.
Considering the magnitude of the project, these delays were relatively miner and cause no real additional inconvenience.

"

"They initially gave me a quote several months before the work but due to some minor issues on my side we did not contract them right away.
When he came out to do the estimate he was very prompt and had a very good feel of what to do to solve my problem (long balcony railing that was a bit wobbly in the center).  
He was able to weld uprights and tie the railing to the roof.  It looks good and he even painted it with the supplied paint.  You cannot even see the welds.  
The railing is now strong and looks good.  He cleaned up after himself and was very professional. I would defiantly recommend Williams Custom Iron to anyone with a railing issue (or any other metal project).
"

"Emilio was great. Very thorough and nice. Answered all questions and plan to hire him again. He did a great job."

"We hired them to encircle our 5 acre property with a metal fence, to include 2 gates for our entries. We also had them construct shade structures for our horses, hitching post and a package box. They did a fantastic job. They were reliable, professional and detail oriented. They clearly take pride in their work, and they should. We have the nicest fence in our neighborhood! We highly recommend Cat Mtn for any fencing and gate projects. You can trust them to show up and do high quality work."

NO LONGER IN BUSINESS! Angie's list wants more money then I can even afford to remove my listing.

"They did a wonderful job were incredibly fast and efficient. They were wonderful about working with our schedule. I have never seen a contractor communicate as well as Eric.  He would text, if they were running late on another job, etc.  They would send pictures to let me know their progress.  I was certainly impressed with his communication through out the entire project."

Welcome to Cornelius Fabrication Co., your destination for bespoke metal craftsmanship! Since our start in January 2020, we've honed our skills in crafting doors, gates, fencing, and structures like awnings and pergolas, turning your ideas into reality.\n\nQuality defines us. We "overbuild" for durability, ensuring each product is top-notch and stands the test of time.\n\nWhy Cornelius Fabrication Co.?\n\nUncompromising Quality: We set the standard for enduring craftsmanship.\nOwner-Operated: Your satisfaction is our personal commitment.\nStatewide Presence: We bring expertise to your doorstep.\nEmergency Services: Count on us for reliable support.\nOur skilled team, driven by passion, blends technical expertise with creative flair. Your vision and our expertise are a perfect collaboration!\n\nDiscover metal mastery at Cornelius Fabrication Co., where craftsmanship thrives!