Get matched with top doors (exterior) installers and replacers in Wabasha, MN

"We replaced the windows and front door in our house. Pella was great to work with and had good pricing. Payton and Hunter did a great job doing the install, quickly and efficiently. Very happy with the experience."

"I would 100% hire this company again. We were on a tight timeline and needed to have our garage service door replaced as part of selling our home. After several companies told us our timeline was unrealistic, I found Doors R Us. Our door was replaced in less than 24 hours after we called them. Professional and timely. Beautiful door and install only took about an hour."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"We had a complex residing project which included removing old cedar shakes and replacing with Hardie shakes and board & batten on a 1940's home with lots of corners and angles. The work done by Mike and Josh was meticulous and they were both enjoyable to have around. John Weber was the project manager and stopped by regularly to make sure the project was going well. Our home looks amazing and many have commented on the attention to detail and high quality finishes. They cut no corners and did amazing work. I would not hesitate to refer Hoffman Weber for any exterior work."

"We are so grateful to Tom for his recent service. Tom installed our new entry door on our home and the project came out absolutely beautiful. Tom went above and beyond to help us and was very knowledgeable about the door her was installing. He showed up on time and got started very promptly. We chose to work with them because of their knowledge and genuine care for doing their work right. We are first time home buyers so we had no idea what the process was of getting a new door installed.We ended up contacting Minnesota 1st Choice for a quote and Bill showed up in a timely fashion and helped us every step of the way. With his help he we were able to create a door that would fit great in our home. We are very pleased with their work and appreciate their going above and beyond. We are looking forward to working with them on future projects. Thanks again!"

"The job went well and Josh (owner) was very responsive to what and how I wanted the work done. The contractor wanted to make sure I was satisfied with the job. The roof looks great and I have no outstanding issues. Cost was below other bids. I would use again!
"

"Excellent. Great customer service. Window even better than expected."

"Working with them has been a breeze! We had them replace the last few windows we needed in a our recently purchased home. Each person we have spoke with has been knowledgeable! And we got a surprise thank you package in the mail with some amazing cookies!! The guys that came to do the install were kind, curious and efficient. Thy We have two kiddos and the guys joked around with them and were funny! The owner of the company (Rich) reached out to us the same day as the install to make sure we were satisfied with the experience and the work done. We have had a great experience all around and will reccomend them to anyone needing windows!! Thank you guys!"

"Working with them has been a breeze! We had them replace the last few windows we needed in a our recently purchased home. Each person we have spoke with has been knowledgeable! And we got a surprise thank you package in the mail with some amazing cookies!! The guys that came to do the install were kind, curious and efficient.We have two kiddos and the guys joked around with them and were funny! We have had a great experience all around and will reccomend them to anyone needing windows!! Thank you guys!"

"The people they sent out came out, they came out , I think about 4 or 5 different times. I talked with the technicians and said, "this is ridiculous, the furnace is old" and he said, "we agree, but they only want to do the patching". They would patch it and it would break, they would patch it, and it would break. Finally, I said, "I want a new furnace. What do we have to do to do a new furnace. You've been out here, this is like the 6th time," and he said, "I'll have my manager write something up", and so they did and they replaced the furnace. They tried. They were more interested in patching things than replacing things. They were willing to send out 4 or 5 different parts. The things that I see that would help the most is if it were easier to get a hold of them on the phone or if their website worked. Just being able to contact someone in person. Sometimes, you can't explain everything online. We were able to get a hold of them, we were able to talk to them. It just takes some time, they had to jump through the hoops with their company, we understood that, but they came through and got us a new furnace. A nice new furnace too."