Top-rated interior trim and decorative moldings installers.

Get matched with top interior trim and decorative moldings installers in Wichita Falls, TX

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Interior trim and decorative moldings installers in Wichita Falls

Avatar for Kitchell Construction

Kitchell Construction

4.87(
76
)
Approved Pro

Kitchell Construction

4.87(
76
)
Approved Pro
Super Service Award
Customers say: Quick response
Recommended by 94% of Angi customers
Recommended by 94% of HomeAdvisor customers
25 local quotes requested

We are a repair and remodeling contracting company. I am a General Contractor and can do anything you need done. We have been in business since December, 1998 and have successfully completed over 950 projects to our customers' satisfaction. We can do it all ... just give us a call. There is no project too large to too small for us to do. Customers fondly call me "Bob the Builder" because "We can fix it; YES, WE CAN!"

"Bob was our contractor. He was always on time and stayed a little later just to get a few more things done, a great and hard worker, got the job done in a timely manner, and the job turned out better then I could have ever imagined. Didn’t charge us an outrageous amount either, he even noticed a few other things that was wrong with my bathroom (i had a lose toilet) and told me how to go about fixing that too! Bob had a great attitude the whole time and was very polite and thankful when we made lunch for him. "

Diana H on December 2025

We are a repair and remodeling contracting company. I am a General Contractor and can do anything you need done. We have been in business since December, 1998 and have successfully completed over 950 projects to our customers' satisfaction. We can do it all ... just give us a call. There is no project too large to too small for us to do. Customers fondly call me "Bob the Builder" because "We can fix it; YES, WE CAN!"

"Bob was our contractor. He was always on time and stayed a little later just to get a few more things done, a great and hard worker, got the job done in a timely manner, and the job turned out better then I could have ever imagined. Didn’t charge us an outrageous amount either, he even noticed a few other things that was wrong with my bathroom (i had a lose toilet) and told me how to go about fixing that too! Bob had a great attitude the whole time and was very polite and thankful when we made lunch for him. "

Diana H on December 2025


Toft General Contracting

No reviews yet

Toft General Contracting

No reviews yet
17 years of experience

We offer full service remodel and renovation. All of our estimates are free. We do mainly Kitchens and Baths but we can do most anything else. We never ask for payment up front we only ask that you pay for materials for your job. We pride ourselves in being trustworthy and detail oriented.

We offer full service remodel and renovation. All of our estimates are free. We do mainly Kitchens and Baths but we can do most anything else. We never ask for payment up front we only ask that you pay for materials for your job. We pride ourselves in being trustworthy and detail oriented.


DEW Renovations/Remodeling

No reviews yet

DEW Renovations/Remodeling

No reviews yet
Free onsite estimate

Handyman. Specializing in drywall, tape bed and texture and paint. Inside and outside painting.

Handyman. Specializing in drywall, tape bed and texture and paint. Inside and outside painting.


COOL-TEMP SIDING CO

3.20(
5
)

COOL-TEMP SIDING CO

3.20(
5
)
64 years of experience

Family owned and operated since 1961. Largest and oldest siding and window company in North Texas and Southern Oklahoma with offices in Wichita Falls, TX and Lawton, OK.

"This job was completed in August of 2016. Initially the job took over a month for the employee to complete. One piece of drip edge was missing and CoolTemp would not get us the piece. We had to purchase it from another vendor even though contract read they would supply all materials. Gutters and drip edge were incorrectly installed, but we didn’t notice it until we began getting rain in this west Texas town. Cool Temp pressured us to sign off on the job while gutters were still being installed, and we did not get to inspect finished product....our fault for letting them pressure us, but we thought they were an honest, trustworthy company and would stand by their product and installation. There is actually no problem with the product, just the installation. Every time it rains the water pours between the gutter and the fascia getting me wet as I walk out of my door. After having it inspected, it was found that the drip edge raises the shingles up approximately 1 inch above the roof allowing the water to run back onto the roof and behind the gutter damaging the decking. After repeated calls to CoolTemp Siding, we have been met with repeated replies that we signed off on it so it must be ok. Now, we will have to have the gutters taken down and reinstalled by another contractor. Please take this as your warning to be cautious of who you do business with and make sure the job is inspected by an independent contractor before you sign off on it. This job was completed in August of 2016. Initially the job took over a month for the employee to complete. One piece of drip edge was missing and CoolTemp would not get us the piece. We had to purchase it from another vendor even though contract read they would supply all materials. Gutters and drip edge were incorrectly installed, but we didn’t notice it until we began getting rain in this west Texas town. Cool Temp pressured us to sign off on the job while gutters were still being installed, and we did not get to inspect finished product....our fault for letting them pressure us, but we thought they were an honest, trustworthy company and would stand by their product and installation. There is actually no problem with the product, just the installation. Every time it rains the water pours between the gutter and the fascia getting me wet as I walk out of my door. After having it inspected, it was found that the drip edge raises the shingles up approximately 1 inch above the roof allowing the water to run back onto the roof and behind the gutter damaging the decking. After repeated calls to CoolTemp Siding, we have been met with repeated replies that we signed off on it so it must be ok. Now, we will have to have the gutters taken down and reinstalled by another contractor. Please take this as your warning to be cautious of who you do business with and make sure the job is inspected by an independent contractor before you sign off on it."

Kathy G on June 2020

Family owned and operated since 1961. Largest and oldest siding and window company in North Texas and Southern Oklahoma with offices in Wichita Falls, TX and Lawton, OK.

"This job was completed in August of 2016. Initially the job took over a month for the employee to complete. One piece of drip edge was missing and CoolTemp would not get us the piece. We had to purchase it from another vendor even though contract read they would supply all materials. Gutters and drip edge were incorrectly installed, but we didn’t notice it until we began getting rain in this west Texas town. Cool Temp pressured us to sign off on the job while gutters were still being installed, and we did not get to inspect finished product....our fault for letting them pressure us, but we thought they were an honest, trustworthy company and would stand by their product and installation. There is actually no problem with the product, just the installation. Every time it rains the water pours between the gutter and the fascia getting me wet as I walk out of my door. After having it inspected, it was found that the drip edge raises the shingles up approximately 1 inch above the roof allowing the water to run back onto the roof and behind the gutter damaging the decking. After repeated calls to CoolTemp Siding, we have been met with repeated replies that we signed off on it so it must be ok. Now, we will have to have the gutters taken down and reinstalled by another contractor. Please take this as your warning to be cautious of who you do business with and make sure the job is inspected by an independent contractor before you sign off on it. This job was completed in August of 2016. Initially the job took over a month for the employee to complete. One piece of drip edge was missing and CoolTemp would not get us the piece. We had to purchase it from another vendor even though contract read they would supply all materials. Gutters and drip edge were incorrectly installed, but we didn’t notice it until we began getting rain in this west Texas town. Cool Temp pressured us to sign off on the job while gutters were still being installed, and we did not get to inspect finished product....our fault for letting them pressure us, but we thought they were an honest, trustworthy company and would stand by their product and installation. There is actually no problem with the product, just the installation. Every time it rains the water pours between the gutter and the fascia getting me wet as I walk out of my door. After having it inspected, it was found that the drip edge raises the shingles up approximately 1 inch above the roof allowing the water to run back onto the roof and behind the gutter damaging the decking. After repeated calls to CoolTemp Siding, we have been met with repeated replies that we signed off on it so it must be ok. Now, we will have to have the gutters taken down and reinstalled by another contractor. Please take this as your warning to be cautious of who you do business with and make sure the job is inspected by an independent contractor before you sign off on it."

Kathy G on June 2020


Avatar for T-Bar Fence Inc

T-Bar Fence Inc

4.63(
30
)

T-Bar Fence Inc

4.63(
30
)
Customers say: Quick response
Recommended by 90% of Angi customers
Recommended by 90% of HomeAdvisor customers

T-Bar Fence has been providing the Dallas/Fort Worth metropolitan area with quality craftsmanship and expertise in the fencing industry since 1981. T-Bar Fence installs custom wood, chain link, ornamental iron and decorative fences for residential and commercial projects. T-Bar Fence also stains and reconditions existing fences and is accredited with the Better Business Bureau with an A+ rating.

T-Bar Fence has been providing the Dallas/Fort Worth metropolitan area with quality craftsmanship and expertise in the fencing industry since 1981. T-Bar Fence installs custom wood, chain link, ornamental iron and decorative fences for residential and commercial projects. T-Bar Fence also stains and reconditions existing fences and is accredited with the Better Business Bureau with an A+ rating.


Avatar for Auto Transport - United Freight Of America

Auto Transport - United Freight Of America

4.84(
920
)

Auto Transport - United Freight Of America

4.84(
920
)
Customers say: Quality work
Recommended by 96% of Angi customers
Recommended by 96% of HomeAdvisor customers

United Freight of America is your all inclusive transport solution. CONTACT US FOR A QUOTE. please include pick up and Drop off locations and vehicle information

"Excellent, no problems. My car was new the first year I used the service and there has never been any damage during the transports. The men picking up and delivering the car have always been pleasant and cooperative. Both Ely and Guy at United Transport has been highly responsive to my needs. I would highly recommend this company."

CLAUDIA H on October 2021

United Freight of America is your all inclusive transport solution. CONTACT US FOR A QUOTE. please include pick up and Drop off locations and vehicle information

"Excellent, no problems. My car was new the first year I used the service and there has never been any damage during the transports. The men picking up and delivering the car have always been pleasant and cooperative. Both Ely and Guy at United Transport has been highly responsive to my needs. I would highly recommend this company."

CLAUDIA H on October 2021


Avatar for Continental metal works

Continental metal works

No reviews yet

Continental metal works

No reviews yet
Free onsite estimate

Residential and commercial metalwork, wrought iron work, front doors, gates & fencing, railings, spiral stair cases, curved stairs, bronze, stainless steel, cable railings, aluminum, gazebos, trellises, beds, tables, custom furniture, etc.

Residential and commercial metalwork, wrought iron work, front doors, gates & fencing, railings, spiral stair cases, curved stairs, bronze, stainless steel, cable railings, aluminum, gazebos, trellises, beds, tables, custom furniture, etc.


Better Energy Cleaning Service

No reviews yet

Better Energy Cleaning Service

No reviews yet
1 years of experience

(Welcome to our new operating BETTER ENERGY SOLAR PANEL CLEANING SERVICE! We are excited to share with you our plan for a successful solar panel cleaning business. Our goal is to provide a comprehensive and cost-effective service to our customers, while also helping to reduce their energy costs. We will provide a thorough cleaning of solar panels, using the latest technology and techniques to ensure that our customers get the most out of their solar energy systems. We will ensure that our customers solar panels are clean and running at peak efficiency. We look forward to working with you and helping you to maximize the potential of your solar energy system.) Free Estimates Available. Feel free to call anytime. (940)-261-0817

(Welcome to our new operating BETTER ENERGY SOLAR PANEL CLEANING SERVICE! We are excited to share with you our plan for a successful solar panel cleaning business. Our goal is to provide a comprehensive and cost-effective service to our customers, while also helping to reduce their energy costs. We will provide a thorough cleaning of solar panels, using the latest technology and techniques to ensure that our customers get the most out of their solar energy systems. We will ensure that our customers solar panels are clean and running at peak efficiency. We look forward to working with you and helping you to maximize the potential of your solar energy system.) Free Estimates Available. Feel free to call anytime. (940)-261-0817


DLM Construction

No reviews yet

DLM Construction

No reviews yet
11 years of experience

SUB contractor

SUB contractor


Dunn Right

No reviews yet

Dunn Right

No reviews yet

Dunn Right services is a welding and handyman service. Fair and honest prices with above average quality. The list of jobs unable to commit to is much smaller than the "can" . In other words, give us a ring and state your need , and we'll get you an estimate and arrive in a timely manner.

Dunn Right services is a welding and handyman service. Fair and honest prices with above average quality. The list of jobs unable to commit to is much smaller than the "can" . In other words, give us a ring and state your need , and we'll get you an estimate and arrive in a timely manner.

...
Showing 1-10 of 315
FAQs for interior trim and decorative moldings installation projects in Wichita Falls, TX

Installing crown molding can be challenging, depending on the material and your skill level. Lightweight materials like polystyrene and softwoods are easier for homeowners to install themselves, offering a cost-saving option. However, heavier materials like hardwoods and plaster are difficult to work with and require professional installation to achieve a high-quality result. Precision is crucial in measuring, cutting, and fitting crown molding, so hiring a professional ensures the best outcome.

Crown molding is available at various price points, ranging from $1 to $30 per linear foot, depending on the material. This wide range offers options for every budget. Affordable materials like MDF, PVC, and polystyrene provide cost-effective solutions, while premium materials like exotic hardwoods or metal offer a luxurious appearance at a higher cost. Regardless of your budget, you can find crown molding that enhances your home's aesthetic.

Crown molding is installed by professional finish carpenters or painters who specialize in detailed trim work. These experts possess the necessary skills and tools to ensure precise measurements, accurate cuts, and seamless installation. By hiring a professional, you can achieve a flawless finish that enhances your home's aesthetic appeal without the risk of common DIY mistakes.

Crown molding can be installed in various areas of your house to add elegance and architectural interest. It is commonly used where walls meet the ceiling, but you can also place crown molding around doors, windows, mirrors, and atop cabinets. Installing crown molding in these locations enhances visual appeal, creates a cohesive design, and adds a touch of sophistication to your home's interior.

To determine how much crown molding to purchase, start by measuring the length of each wall where you plan to install crown molding and add the measurements together to determine the total linear feet required. Purchase an extra 10% of material to account for waste from cutting angles and to ensure seamless joints by using full-length pieces when possible. Including additional material helps avoid shortages and ensures a smooth installation process.

For a professional crown molding installer, this task takes about 1 to 3 hours per room, depending on size and complexity. Factors like the material, design intricacy, and number of corners can affect the time. If you're doing it yourself, expect it to take longer as you get the hang of measuring and cutting precise angles. Advanced measuring and planning or hiring a pro can help the project go smoothly.

The Wichita Falls, TX homeowners’ guide to interior trim and decorative moldings installations

From average costs to expert advice, get all the answers you need to get your job done.