Get matched with top carpenters in Martinsville, VA

"Charles did a great job and quickly in replacing my deck and fence supports that were rotted out due to water damage. In addition, he will be doing additional work at our home. Very reasonable for his high quality work. Bob Dooley"

"I needed stucco repair work on an old chimney (and other spots). Grady was meticulous and thoughtful on what approaches and materials would work. Throughout the project they allocated sufficient time for each treatment to cure and inspected the work before proceeding to the next step. Grady started the project with no money down and only required ongoing payments for materials until the project was well underway. The final payment was due only after they did a final inspection. Total project cost was also below other bids."

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

Im a hardworking and dependable worker based in Virginia with experience in Commercial & residential construction, hauling, equipment operation, property maintenance, and outdoor labor. I take pride in doing quality work, showing up on time, and treating every job like it’s my own property.\n\nI’m available for jobs throughout the surrounding areas and willing to travel for the right project. My skills include general labor, demolition, hauling, light carpentry, land clearing, drywall work, concrete prep, equipment operation, and property cleanup.\n\nCustomers hire me because I communicate well, work efficiently, and focus on getting the job done right the first time. I’m always willing to take on new challenges and provide reliable service at a fair price.\n

Trust me to handle all of your swimming pool needs; from seasonal opening & closing, liner replacement, and new swimming pool construction.

"In the end, we were more than totally pleased with all the work done by Wilson Delgado. He made several trips (always punctual) out to the country to pickup and return furniture, and also to deliver fabric books and samples for our clear vinyl slipcovers. We had minor glitches as he was unexpectedly called out of the country for a family emergency, but in his absence, I was contacted to let me know the reason for the delay. Then, Covid-19 hit and he was in protective covering when he delivered our last piece of furniture. At all times, he was professional, courteous, and treated our furniture and home as if it was his own. So far as pricing and how long he quoted for all the work-----believe it or not, he was just about half of what the other upholstery shop quoted me, and also the work was completed faster than the other shop. He is truly a talented craftsman that takes pride in his work."

"I have used Murphy in the past. Their electrician for a day deal is terrific. Mike was on time, polite, professional, knew his stuff, worked hard and cleaned up afterwards. Scheduling him online was a breeze and I highly recommend this company."

"The work was excellent. Brian McCracken performed a walk-though with me and provided detailed written estimates for the interior and exterior work. He explained the options and costs for each of the tasks, and was prompt in scheduling the jobs. His teams are first rate. Communication is excellent and they leave the site clean and tidy each day. There was not a drip of stray stray paint anywhere during or after the jobs. I especially appreciated the interior service. They emptied the closets and replaced everything after as they went along. They also took down and rehung all of the pictures and moved furniture as necessary. They were very responsive to follow-up issues (not their fault) with the fit of the front door after painting and replacing the seal. They came back twice to make adjustments and the final outcome was exactly what i wanted. All American was recommended to me by a friend who was very impressed with their exterior work on his townhouse. I recommended them to a neighbor who is also very pleased with their interior painting.  They are not the lowest bidder but their prices are fair and the work is of the highest quality."

"

I had contacted  five other contractors before finding Barry and his stellar team. Two contractors were no shows and three showed but did not return with an estimate, even after several calls to them. I knew that the job would be challenging and would require a skilled architect and contractor. While where the pool sat was level ground, the ground surrounding it was not, it provided very difficult elevation changes. Additionally the deck had to marry to the house and Florida room elevations, which were also different. I also wanted the deck boards to carry over the pool edge all around the pool - an oval pool within a disparate geometric deck (probably why the other contractors ran away)

Barry arrived on time to provide an estimate, made some initial measurements, addressed material requirements, number of gates, steps, access points, etc. Provided a rough order of magnitude based on estimated square footage and asked if he could have his architect come out. I agreed and he said he would get back to me. Barry returned the following day with the architect, three days after that we had plans and a contract. Two days after that we had a permit, then 3 days later the material was delivered and with it a crew that I can say based on experience before and after the job is in all likely hood the best  in the area (not my first contracting rodeo in Virginia Beach). Barry's "A" team is compromised of his son Chase, Fanz Roman and Gilder Roman. The crew was polite, attentive and most importantly WORKED from the time they arrived till the time they departed. 

I know Barry had other jobs ongoing in parallel with mine; but Barry showed up regularly to both work alongside his crew and provide supervision for the challenging compound miters (though little to no supervision was needed-they all have mad carpentry skills!). Barry did have to absent himself for a job up north for a day or two; but the team never missed a beat and Barry called me to ensure I was having no issues. One of Barry's attributes that I really appreciated, other than his knowledge and experience, was his responsiveness, whether through email or phone he always answered immediately. I also appreciated that we worked as a team. If there was an issue it was resolved quickly. As an example, it became apparent that the planned deck pattern would not work, though it looked good on paper. Fanz and Gilder designed a solution, laid it out for approval, The result  was perfect!

I have two more projects I am saving for. I am not even going to waste my time chasing after other contractors. Barry's price is within the market, his work ethic exemplary and he delivers on his promise, the jobs will be his. I want it right, so I will wait for his availability.

,
"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"