Get matched with top landscape minor grading or resloping pros in Englewood, NJ

"Dinardi responded to our request for proposal quickly. When we eventually hired them, they scheduled and performed the work very quickly. They did an excellent job of stripping our backyard of all the old grass, weeds and debris and putting down soil and sod after grading the yard. They also explained how to take care of the new sod to assure successful results. We would highly recommend this company."

"Used for years now"

"I contacted Josh at C3 for a quote to prepare and build a flat, level, 18' by 14' base on a slope framed with 3 levels of 6 x 6 timbers to retain 3 individual layers of premium quality aggregate for superior drainage and soil stability. His design was to insure the driest base environment to install a shed that will last far longer than other contractors I spoke with. I couldn't have been happier with my choice of C3. He and his crew were very professional and detailed in the work performed. Always on time and mindful of the surrounding work area and exceptionally detailed in their final cleanup of the site. I would recommend Josh and his company for this type of work and larger projects due to his commitment to excellence and customer satisfaction."

"I had an outstanding experience working with Zach and Breaking Ground Earthworks! Zach handled a big job for us—removing old retaining walls, regrading the slope of our yard, prepping the area for new landscaping, and replacing an outdated drainage system. He also took care of a few stubborn stumps left behind from previous tree removals. His work was not only thorough and precise, but he was also professional, efficient, and clearly very experienced. The site was always left clean and organized, and communication throughout the project was excellent. I was impressed with the transformation and the quality of Zach’s work. Highly recommend him for any excavation or site prep needs—you’ll be in great hands!"

"I would recommend Kenny J’s to anyone looking for a clean professional job done! He went above and beyond. A+"

"This past weekend I had a bad experience. The short story is that an A. J. Perri technician diagnosed my furnace problem and wrote me an estimate for $1,600, parts and labor. It turns out my furnace had a different problem that required no parts and only 15 minutes of labor. Here are the details: This past Saturday my furnace stopped heating my home. I called A.J. Perri and they sent out a technician on Sunday morning. The tech ran some checks and concluded that my “inducer assembly” had to be replaced. Parts and installation would be $1,600. He said someone from the office would contact me on Monday and let me know when they could have the part. He also said that he couldn't be certain that there weren't other issues that wouldn't be found until the inducer was repaired. After the technician left I did some searching on the Internet. YouTube and Reddit were especially helpful. I discovered that the problem was that the condensate drain was clogged and water had backed up into the inducer assembly. The water prevented the pressure switches from detecting that the inducer was running and this prevented the furnace from starting. When I disconnected the condensate hose *2 quarts* of water drained out of the inducer assembly! This water was supposed to drain into a small pump unit on the floor that sends collected water to the sump. Over the years mold and algae had clogged the condensate trap and caused the backup. I disconnected all the hoses and removed the trap. I blew out the trap (making a mess) and confirmed that water would easily flow through it. I put it all back together and the furnace is working fine. The sad lesson here is that you can’t always rely on supposed experts. The good news is that the Internet can be your friend. Even more details: The original symptom was that the furnace would start up, the inducer motor would run for about 20 seconds and then it would shut off. This cycle would repeat every few minutes. Every few hours the furnace completed the startup cycle and then I’d get heat. Then it would stop heating for hours, and the indoor temperature would drop to the low 60s. What I learned from YouTube is that there are multiple stages for furnace startup. The inducer motor spins a cage that sucks in fresh air for combustion, and then pushes the hot gases through the heat exchanger and out the flue. Each stage in the startup has safety checks. The furnace will not ignite if the pressure sensors don’t detect that the inducer motor is working properly. Water is a byproduct of the combustion. It starts as a vapor but then condenses in the flue pipe and drains back to the inducer assembly, where it’s supposed to run through a hose to a pump that sends it over to my basement sump. The furnace is 14 years old. Apparently that’s long enough for mold and algae to clog the condensate trap and cause water to back up into the inducer. The 2 qts of water blocked the pressure sensor switches and so the furnace wouldn’t light. Final thoughts: For over 14 years I've had great experiences with A.J. Perri. They replaced my home’s original furnace and Air Conditioner units. They moved our outside A/C unit to the side of our house so we could have more quiet in the backyard. I had them come for periodic heating and A/C maintenance checkups. My impression is that they might cost a bit more, but they were reliable. I'm saddened that I need to post such a negative review."