Top-rated wrought iron fence installers.

Get matched with top wrought iron fence installers in Florence, TX

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Wrought iron fence installers in Florence

Avatar for Fazio Fence Co LLC
Fazio Fence Co LLC
5.0(
8
)

Serving Florence, TX and surrounding areas

Approved

In business since 2022

Free estimates

Emergency services offered

"Ray was very professional from start to finish. He was able to be very flexible and reliable with my schedule since I have dogs in my back yard. It only took him 2 days to have my fence looking like it did when the house was build. Highly recommend for any project a specially fencing!!"
Fazio Fence Co LLC
1 neighbors recently requested a quote
Recommended by75%of homeowners
Avatar for E5 Gate Services
E5 Gate Services
5.0(
5
)

Serving Florence, TX and surrounding areas

Approved

In business since 2019

Free estimates

Warranties offered

"Todd was professional, courteous and met all expectations that he set. We had 300+ feet of chain link installed. It is straight, solid and even. I have plans to use E5 Gate Services soon for an entry gate. I highly recommend him."
Response time4 days
5 neighbors recently requested a quote
Recommended by100%of homeowners
Avatar for Landers Ranch Services
Landers Ranch Services
5.0(
7
)

Serving Florence, TX and surrounding areas

Approved

Customers say: Quick response

At Landers Ranch Services, we are a reputable excavation company located in Grimes County, TX. Serving the surrounding areas, we pride ourselves on delivering top-notch services to meet all our clients' excavation needs. With our skilled team and state-of-the-art equipment, we ensure efficient and reliable results for every project.

Bulkhead
Bulkhead
Bulkhead
Land clearing
Land clearing

+10

18 neighbors recently requested a quote
Recommended by14%of homeowners
Avatar for M S Welding
M S Welding
5.0(
3
)

Serving Florence, TX and surrounding areas

Approved

In business since 2019

Free estimates

Credit card accepted

"I hired them to build and install a entry gate and patio fence. I hired this company based on a telephone call with the owner Mike. No referral or reviews to fall back on but my gut said he would do what I needed done. What a pleasant surprise. They proved they are a solid veteran owned business. MS Welding were responsive and professional. Quality materials and build. Unlike many contractors I have worked with, Mike communicated with me throughout the process to make sure I got exactly what I wanted. My wife and I are so pleased with the end result. I would not hesitate to hire this company again. I just found out they do painting and concrete also. I have no doubt they do this type of work well."
Fabrication columns
Erection of steel
Fabrication of beams
Erection
Stair fab & erect

+21

Response time1 day
1 neighbors recently requested a quote
Henniger Welding
5.0(
1
)

Serving Florence, TX and surrounding areas

Approved

Free estimates

Offers commercial services

"Joshua Henniger did an add-on on my existing shop. I needed a cover over my new truck lift. Not only did he knock it out way quicker than expected but did an extremely impressive job. All the holes he had to cut in my existing shop look perfect and the trim is spot on. I will not be hiring another welder to do anything with my business or even personal projects. Josh also saved me THOUSANDS of dollars welding up a couple aluminum transmission cases I broke. Besides all that, the only people I do business with are good hearted people."
Avatar for Brunson Fence Company
Brunson Fence Company
4.1(
32
)

Serving Florence, TX and surrounding areas

In business since 2008

Free estimates

Emergency services offered

"Was concerned when DBC wanted 70% of the job up front.  Only gave 50% up front.  Owner called on Christmas Eve asking for 25% more so he could pay his employees.
It is a given that this was a cold winter and was difficult to get things done timely, however DBC Fence seemed to be unfamiliar with painting and treating iron fencing.  Even their employees stated that they didn't paint iron fences.  They missed serveral opportunities to paint and complete the job.  They worked short hours and not at all on Saturdays or Sundays even if the weather was good.  Due to weather they were unable to work for several weeks but left tarps on the ground and plastic wrap all over the yard.
When they decided to paint by hand, the owner was only going to paint the half of the fence in my yard.  Painting only half of a rod iron fence is almost impossible.  It just seemed like a way to get my neighbor to pay them more.
In the end the job was finally completed and looks good.  Both sides of the fence were painted.  They did not replace the stones that were along the fence that they moved to paint and they did not haul off one of the columns as promised.
I am sure they are a fine company and will have lots of reasons why this was the weather and my fault but I can not recommend them and I would not ever use them again.

"
Recommended by85%of homeowners
...
Showing 1-10 of 130
FAQs for wrought iron fence installation projects in Florence, TX

Galvanizing is the best way to keep rain from eating away at your wrought iron fence. The process coats each bar in a thin layer of zinc, sealing out moisture and blocking rust. Most panels come pre-galvanized, but you’ll still want to wash and repaint every few years to keep that shield intact. 

Skipping galvanization may save a few dollars up front, yet you’ll spend far more later repairing corrosion or replacing sections outright.

Expect to pay more for wrought iron than for wood at the outset, but iron wins the long game. A standard wood fence runs $1,700 to $3,900, yet you’ll sand, stain, and eventually replace it. Wrought iron may double that initial tab, but it can last 50 to 100 years with a quick paint job every few seasons. Factor in fewer repairs and less upkeep, and iron often edges out wood on lifetime cost.

Hiring a pro to paint wrought iron runs $8 to $10 per linear foot, a price that covers careful prep, rust removal, and high-grade paint for long-term protection. DIY-ers can trim that labor bill, but you’ll need quality brushes, rust-inhibiting primer, and time to apply multiple thin coats. Skimp on prep or materials, and the finish will peel sooner, forcing you back to square one.

A well-maintained wrought iron fence easily lasts 50 to 100 years. Plan to wash it annually and sand-and-repaint every two to three years to keep rust from gaining a foothold. If you spot flakes or pitting early, touch-up paint stops corrosion in its tracks. When in doubt, a local fence pro can walk you through a maintenance schedule tailored to your climate.

Homeowners choose wrought iron fencing because it delivers exceptional security and a timeless aesthetic. This fence offers robust protection that deters intruders while providing a classic look that elevates property curb appeal. 

Its construction from high-grade materials ensures lasting durability and reduces maintenance needs. The design also enhances home value and offers consistent strength and elegance.

Wrought iron fencing is available exclusively through certified local fence installation companies and reputable specialized suppliers. This source guarantees high-quality materials and professional installation that adhere to strict performance standards. 

Homeowners will find that these trusted providers deliver materials backed by quality control and expert support, ensuring an investment that meets both durability and aesthetic expectations.

The Florence, TX homeowners’ guide to wrought iron fence installations

From average costs to expert advice, get all the answers you need to get your job done.

  • iron security gate at the end of driveway of home

    The cost to install an automatic driveway gate depends on size, type, features, and labor rates. Here's how to budget for a new driveway gate.

  • tall metal privacy fence around property

    Discover the average cost of a steel fence and how prices vary depending on the fence’s height, installation difficulty, number of gates, and more.

  • black chain link fence between two backyards

    This guide outlines the cost to install a black chain-link fence as well as the factors the influence cost, including materials, labor, fence height and length, and location.