Top-rated sewer main clearers.

Get matched with top sewer main clearers in Holly Springs, MS

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Sewer main clearers in Holly Springs

Rustenhaven Services, LLC
New to Angi

Serving Holly Springs, MS and surrounding areas

Angi Approved

In business since 1995

Free estimates

Credit card accepted

We have over 30 years of experience in the industry. We are dedicated to providing our clients with the very best in service, installation, and repair to meet your plumbing needs. We take pride in the attention to detail put into each of the projects we're involved with. We're known for our quality work and the integrity of our business. We look forward to building long-term relationships with our clients and work hard to guarantee your satisfaction.\n

Closet collar repair
Mop Sink Service Faucet
Mop sink service faucet
Response time2 days
Avatar for North Delta Services
North Delta Services
4.7(
12
)

Serving Holly Springs, MS and surrounding areas

Emergency services offered

"Where to start? First, I would rate him zero out of 5 if I could. This problem I?ve had since February and he refuses to contact me or get back in touch with me for a problem he created. I will never hire this person again because he is so unprofessional. My tankless water heater has been malfunctioning?. The hot water turns cold after a few minutes?. Both in the shower and when washing dishes. I don?t like taking a cold shower, and I bet Cody wouldn?t be happy about taking a cold shower every day. This happens EVERY TIME I get in the shower. Cody has been contacted several times. When he did respond, he said he would try to contact the store where he purchased it. I received no update. Another time when he responded, he said he would try to contact the manufacturer. Still no update. Now he won?t respond at all! I?ve gotten several people to contact him as well and he will respond once or twice then nothing after that. This is so unprofessional and should be rectified asap!"
Plumbing Project
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+14

Recommended by91%of homeowners
Avatar for RW Heating, Air, Plumbing & Electrical Inc.
RW Heating, Air, Plumbing & Electrical Inc.
4.1(
48
)

Serving Holly Springs, MS and surrounding areas

In business since 2000

Free estimates

Emergency services offered

"Todd and Matt Clayton showed up on time, got the work done quickly, and exceeded expectations in terms of advising on recommended next steps as well as the quality and completeness of the work. Well done!"
Hotel fireplace
Another happy customer
Made sure their emergency drain was sloped instead of laying flat like previously done by another company
RW 21 point A/C check
RW 21 point A/C check

+28

Recommended by75%of homeowners
Avatar for Mitch Wright Plumbing Heating & Air
Mitch Wright Plumbing Heating & Air
4.3(
47
)

Serving Holly Springs, MS and surrounding areas

In business since 1983

Emergency services offered

Credit card accepted

"ought a Lennox A/C system (through COSTCO) and Mitch Wright, Plumbing, Heating, & Air was the contractor assigned. I delayed posting review to allow time to correct “mistakes”, but they have done nothing. Mitch Wright sent a salesman out who was not on time for the first visit, so a second visit was required. He wasn't on time for the second visit either. He wrote me a quote for 16 & 18 SEER system, but the major systems stated “Model and efficiencies may vary”. I told the salesman I needed a quote with model numbers, and if I pay for a 16 or 18 SEER2 system, I expect to get a 16 or 18 SEER2 system. He provided an updated quote and assured me I would receive the efficiency I ordered. I accepted the offer. I told him I expect model numbers to match on install day. Mitch Wright installed different models of equipment (outdoor A/C unit, furnace, and thermostat). When I informed installers about the error with the outside A/C unit, they claimed it was an upgrade. When I informed the salesman of the error, he told me not to look at the ENERGY GUIDE and that they shouldn’t add those because they don’t mean anything. I told him the model number was wrong, and he brushed me off, telling me to contact someone else. I bought a low-NOx furnace ML180UH090XE48BK, but Mitch Wright decided to install a standard furnace ML180UH090E48BK. No idea the cost difference, but generally, low NOX costs more and is better for air. I am up in the middle of the night because the furnace exhaust through the roof is leaking due to the poor craftsmanship of Mitch Wright Installers. Their sloppy installation is damaging my property! I cleaned up water after discovering a leak to prevent further property damage and placed towels to catch rain that drips through. The furnace has new code flashing. The installers did not properly seal the air handler, and condensation formed at the air leaks. Water leaked all around the air handler and into the furnace. I had to seal the air handler that evening to prevent (further) water damage to the furnace. All the duct connections to the air handler were leaking air and causing condensation as well, requiring me to fix them. Air was leaking at the connection on the inlet side just past the air handler, sending unfiltered air into the blower. The furnace developed a fault code on the same day as installation. This all occurred on Thursday, June 26 2025. Mitch Wright has done nothing to correct their “mistake”. All they did was send this email: “I do apologize for the mishap between EL16KC1-047 and the EL16KC1-048. We are actively looking into the situation to provide a resolution to you and your home. We are currently discussing the differences between the 047 and the 048 model that you received. In the past, Lennox has substituted both of these models out due to product availability. As of right now the response we have received from Lennox is that the 047 model was created to hit different targets, within different market requirements. Our marketing standard is the 048 model. We wanted to contact you before the weekend to assure you that we are working on it. If you have any further questions or concerns, please don’t hesitate to call our office or email us back. Thank you for trusting us with this matter.” Don’t trust these people with your home! Look at the Yelp reviews; they offer another perspective of this company."
Additional Photos
Recommended by72%of homeowners
Avatar for Premier Plumbing and Mechanical Inc
Premier Plumbing and Mechanical Inc
4.5(
8
)

Serving Holly Springs, MS and surrounding areas

In business since 2005

Free estimates

Emergency services offered

"I got a leaky faucet fixed unfortunately a couple days later the knob got very hard to turn I contacted them through the phone and text was told someone would get back to me next day but no one ever did"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+66

Recommended by87%of homeowners
Showing 1-10 of 15

The Holly Springs, MS homeowners’ guide to sewer main clearings

From average costs to expert advice, get all the answers you need to get your job done.