Top-rated interior trim and decorative moldings installers.

Get matched with top interior trim and decorative moldings installers in Mills, WY

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Interior trim and decorative moldings installers in Mills

Avatar for Alex Polanski Construction LLC
Alex Polanski Construction LLC
5.0(
1
)
Interior Trim and Decorative Moldings - Install

Serving Mills, WY and surrounding areas

Approved

In business since 2021

Free estimates

"The contractor was here on time, every day until the job was finished. I absolutely love my custom deck. He was very meticulous but quick. The price was very reasonable and well below the high-priced quotes I received for the same job."
Deck
Deck
Deck
Deck
Deck

+4

Response time6 hrs
Response rate96%
5 neighbors recently requested a quote
Freye Construction
5.0(
2
)
Interior Trim and Decorative Moldings - Install

Serving Mills, WY and surrounding areas

In business since 2021

Free estimates

We're a locally owned and operated company with over 22 years of industry experience. We value honesty and integrity, and stand behind our work. We specialize in cabinetry installation, custom closets, interior trim and decorative molding installation, built-in furniture, and a variety of related projects. We pride ourselves on the quality of our work as well as our commitment to outstanding results. We look forward to building long-term relationships with our clients and guarantee your satisfaction!

Response time4 hrs
Recommended by100%of homeowners
Diamond Custom Design Build
4.0(
5
)
Interior Trim and Decorative Moldings - Install

Serving Mills, WY and surrounding areas

In business since 2008

Free estimates

Warranties offered

"Dutch and his partner, Mike, put down our hardwood flooring for us in just a few days! Before our floor was laid, they took a wall down in our kitchen which gave us a wonderful open "great room". They were incredible workers. Dutch has so much experience that he was able to figure out some real tough situations we had with wiring and plumbing after the wall was down. Mike was excellent at crawling up in the attic and helping Dutch reroute all the exposed wiring. I've never seen two guys work so hard and put in such long days. They were incredibly fast at their work and I would highly recommend them for any remodeling job. Very nice guys!"
Natural Stone Veneer
Complete Gas Install
Sundeck 5 Tiers
Lodge Frame
Rondeau Project

+14

Recommended by100%of homeowners
Avatar for Jerry E. Hunt Carpentry & Contracting LLC
Jerry E. Hunt Carpentry & Contracting LLC
3.9(
7
)
Interior Trim and Decorative Moldings - Install

Serving Mills, WY and surrounding areas

In business since 2008

Free estimates

Emergency services offered

"Early Nov. 2014 - We called Jerry asking for a quote. He quickly responded and even came on a Saturday so my husband could be there. We found Jerry to be very knowledgable. He provided excellent insight into what we actually could and couldn't hope to achieve in our extremely small bathroom in a nearly century old house.

We are very new to contractors, contracting and best hiring practices.

We informed Jerry that we wanted to hire him. We explained that we would be seeking a home repair loan & asked for a written quote. Jerry explained that, due to the unknown extend of mold, it was hard for him to say what the total cost would be. So, he couldn't really write me a quote. He did say that, depending on the mold & the fixtures we bought - the job was likely between $6k and $12k.

Nov. 26, 2014: Loan completed - We immediately contacted Mr. Hunt to inform him and ask what could formally be done to secure his services. Due to a family member's hospice care and the holiday season - we stated that we would like to get started after New Years. We offered a deposit and Mr. Hunt graciously declined. He didn't ask for a contract to be signed since the potential cost was so varied.

Jan. 2, 2015: We met with Jerry and his son at Home Depot to coordinate our preferences and discuss design ideas. I had asked about replacing the tub with a shower and moving the toilet into the newly emptied space. I honestly take full responsibility for throwing out this completely new design idea - thus taking us back to the drawing board. AT THIS MEETING - IT'S IMPORTANT TO NOTE: Jerry & his son were absolutely amazing help to us as we navigated a wealth of options we had never noticed in bathroom decor before. Then, when I tossed out my radical idea - Jerry's son was quickly taking pen to paper and drawing as Jerry painted my thoughts into words. We agreed that Jerry would contact a plumber to assess the ability to move the toilet.

Mid January 2015. Jerry brought the plumbing company in to assess the potential toilet move. The plumber had several ideas & concerns to check on and did call me back in the following week or so with questions. Both Jerry & the plumber were to meet, go over the results of their research and then contact us.

Over the next month, Jerry was having some personal matters that were slowing his progress. But, his Angie's list ratings for staying with a job were good. I insisted that he take care of what he needed to - but.....he always insisted he would get back to me 'next week'.

Feb. 28, 2015 Saturday: I called Jerry. I was hoping to find out what could be done to get this project going. Again, he was in the midst of recently happened personal concerns that required his attention - rightly so. I did hire Mr. Hunt in November and asked that we not start until January - due to our own family/holiday concerns. We have no issue with showing compassion. . Jerry apologized and, as I offered to start coordinating on his behalf - he insisted that, as general contractor, HE was responsible and would contact the plumber the following week. He firmly stated that he would call me back 'if not that week - then no later than the following one'.

I decided that I would wait for Mr. Hunt to make the next contact.

I never heard from him again.

Maybe I did something that chased him off? I can't figure it out though. We're fairly nice folk and we had cash to pay. Our question about moving the toilet appeared to be reasonable and that decision was done by early February and coordinated through contact directly with the plumber. Basically, whatever percent extra normally billed by General for such service would've been easy money. We were never told the issue was overbooking or job related. It's all just.....odd.

"
Additional Photos
Recommended by80%of homeowners
Showing 1-10 of 37
FAQs for interior trim and decorative moldings installation projects in Mills, WY

Installing crown molding can be challenging, depending on the material and your skill level. Lightweight materials like polystyrene and softwoods are easier for homeowners to install themselves, offering a cost-saving option. However, heavier materials like hardwoods and plaster are difficult to work with and require professional installation to achieve a high-quality result. Precision is crucial in measuring, cutting, and fitting crown molding, so hiring a professional ensures the best outcome.

Crown molding is available at various price points, ranging from $1 to $30 per linear foot, depending on the material. This wide range offers options for every budget. Affordable materials like MDF, PVC, and polystyrene provide cost-effective solutions, while premium materials like exotic hardwoods or metal offer a luxurious appearance at a higher cost. Regardless of your budget, you can find crown molding that enhances your home's aesthetic.

Crown molding is installed by professional finish carpenters or painters who specialize in detailed trim work. These experts possess the necessary skills and tools to ensure precise measurements, accurate cuts, and seamless installation. By hiring a professional, you can achieve a flawless finish that enhances your home's aesthetic appeal without the risk of common DIY mistakes.

Crown molding can be installed in various areas of your house to add elegance and architectural interest. It is commonly used where walls meet the ceiling, but you can also place crown molding around doors, windows, mirrors, and atop cabinets. Installing crown molding in these locations enhances visual appeal, creates a cohesive design, and adds a touch of sophistication to your home's interior.

To determine how much crown molding to purchase, start by measuring the length of each wall where you plan to install crown molding and add the measurements together to determine the total linear feet required. Purchase an extra 10% of material to account for waste from cutting angles and to ensure seamless joints by using full-length pieces when possible. Including additional material helps avoid shortages and ensures a smooth installation process.

For a professional crown molding installer, this task takes about 1 to 3 hours per room, depending on size and complexity. Factors like the material, design intricacy, and number of corners can affect the time. If you're doing it yourself, expect it to take longer as you get the hang of measuring and cutting precise angles. Advanced measuring and planning or hiring a pro can help the project go smoothly.

The Mills, WY homeowners’ guide to interior trim and decorative moldings installations

From average costs to expert advice, get all the answers you need to get your job done.