Get matched with top doors (interior) installers and replacers in Northampton, PA

"Rick Mojica was very prompt at responding to my original Angi request for quotes. He called me an hour or 2 later and came over the next morning to take an inventory and measure the doors to be installed. We replaced 10 old interior doors with new 6-panel textured doors (8 solid, 2 hollow). He also installed a new track and rollers on one closet door with sliding doors. The solid doors were special order items, so it took 35 - 40 days to get the doors. We were not in a hurry. Rick kept us updated and called to schedule installation as soon as the doors came in. He arrived at our house with the doors and all of the hardware that he needed. He transferred our existing door handles to the new doors and installed all of the additional hardware that we had purchased (door stops and hooks for the back of the bathroom doors). All of the doors fit perfectly. He vacuumed and cleaned up as he went from room to room. He hung all 10 doors and the new hardware for the sliding closet doors in less than a day. Amazingly fast and efficient. We HIGHLY RECOMMEND Rick Mojica for any door or window work that you need. Very professional, enthusiastic, and a pleasure to work with."

"I called this company to help me with an issue with my sliding door. It was stuck and I was worried I would need to replace it. Garrett came and was able to resolve the issue without having to replace the door. Thank you Mr. Handyman!"

"A great team of young electricians came to work at my home to fix existing GFI outlets and install a motion detector in the garage. They were here for three hours. They went at their pace to make sure everything was installed correctly. They were very meticulous. They wouldn't give me a quote before starting the job. They couldn't judge how long it would take or the scope of the work until they were deep into it. They are young and learning, but the quality of work surpassed my expectations."

Vision Finish Carpentry since 2015 \nWe do all carpentry jobs and more!\nQuality is our point of view

"Nice job...they had to chisel out some of the concrete to fit the door just right at the bottom..you would never know they were there..mixed cement and built up the area..looks good"

"Professional and courteous. Replaced rotten soffit and exterior trim boards. Repainted and looking brand new."

"I recently had 1st Security install a system in my new house and so far have been very pleased with all aspects of the system, from the initial estimate to the installation to the functioning of the system itself. Jeremy did our initial estimate and provided us with a thorough explanation of the system. I already had done a significant amount of research comparing Alarm.com to ADT and some of the self-install options, but Jeremy was able to provide even more information and help me to understand better the pros and cons of each approach. Larry did our installation and also was very friendly and knowledgeable, explaining each step of the installation process and providing me with a tutorial at the end. My wife and I have had no issues with the system so far. It is very intuitive, and we have been able to customize it to fit our unique needs. I highly recommend considering 1st Security for anyone looking at installing, switching, or upgrading their security system."

"They completed the job ahead of schedule. Their expert installers were there early, extremely pleasant, worked tirelessly and cleaned up the property when the job was completed. I would absolutely recommend and hire this company again to do other projects in my home. There were no surprises or unexpected costs associated with the project. Extremely satisfied customer."

"This is the largest remodeling project we've ever done, so we didn't know what to expect. From the very first contact Kenny was personable and professional, and was instrumental in helping us decide our best options. We followed many of his suggestions, but when we didn't he was totally fine when we wanted to go a different direction. I'm probably not the easiest person to work for, and I'm sure Kenny had to feel some frustration at times with my demands, but he took it all in stride and always remained pleasant. There will always be hiccups in a job this size and I'll admit we had our share. When I felt Kenny missed something or didn't do something to my satisfaction I always brought it to his attention and he was quick to fix whatever it was. Fortunately it was very easy to communicate with Kenny, and I believe he felt the same way towards us which help the whole process go smoothly. The remodel took a little longer than we expected, but in the end we are satisfied with Kenny's work and would hire him again."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"