Top-rated batt, rolled or reflective insulation install or upgrade pros.

Get matched with top batt, rolled or reflective insulation install or upgrade pros in Redmond, WA

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Batt, rolled or reflective insulation install or upgrade pros in Redmond

Avatar for Insulation Northwest
Insulation Northwest
4.8(
98
)

Serving Redmond, WA and surrounding areas

Approved

Super Service Award Winner

In business since 2006

Free estimates

Warranties offered

"The estimator was great, he listened to my concerns and offered options that suited my needs. The workers were respectful and got to work right away. I had insulation installed under my floor in the crawl space, a ground cover installed, ducts sealed, and the garage ducts wrapped. I was very happy with the insulation results, I no longer feel a difference in air temperature between rooms. I was not thrilled with the ground cover nor the garage ducts wrap, these jobs seemed rushed. The ground cover had multiple holes and was not put down with a function or pleasing aesthetic in mind. The garage ducts wrap is definitely helping with the loss of heat, but it looks clumsy with white tape all over the place. Overall I'm satisfied. I just think parts of the job were rushed."
Additional Photos
Additional Photos
Additional Photos
23 neighbors recently requested a quote
Recommended by81%of homeowners
Avatar for PNW Insulation, LLC
PNW Insulation, LLC
4.7(
250
)

Serving Redmond, WA and surrounding areas

Approved

In business since 2015

Free estimates

Warranties offered

"A joy working with PNW insulation again, every time they are wonderful. We had spray + batt insulation installed. The crews were awesome and efficient. Highly recommend Andres is wonderful to work you."
Before
All insulated
Final with Wmp
Getting ready to start
Inside office

+22

Response time1 day
Response rate93%
49 neighbors recently requested a quote
Avatar for Insulation Co., LLC - Removal & Clean Outs
Insulation Co., LLC - Removal & Clean Outs
4.9(
216
)

Serving Redmond, WA and surrounding areas

Approved

In business since 2009

Free estimates

Warranties offered

"Insulation Co recently performed a crawlspace cleanout. Jo Estrada performed a bid for my home based upon on-line square footage and floor plans very quickly. His staff of 3 men arrived at about 7:30 AM and completed the crawlspace cleanout in about 7 hours. Several things that I learned during this process my 1998 built home: Had insulation with formaldehyde Had R-19 insulation - New installed insulation was R-30 The old insulation was no longer efficient after 20 years The new (R-30) insulation will be efficient for 30 years Insulation Co also does attic insulation replacement When they completed the crawlspace cleanout, the crawlspace looked better than it did when the home was new."
1
2
3
1
2

+46

Response time5 hrs
Recommended by51%of homeowners
Avatar for Lake Atitlan Insulation, LLC
Lake Atitlan Insulation, LLC
5.0(
20
)

Serving Redmond, WA and surrounding areas

Approved

In business since 2021

Free estimates

Credit card accepted

"The lake atitlan, insulation team just finished replacing our old blown in insulation in our attics with white R-38 rolled batt insulation. Overall, we were very happy with their work and attention to detail. Everything was spotless when they left. They were also a few thousand dollars less expensive than a bid we got from a larger local chain. The old insulation was blocking the soffit vents (under the gutters) allowing moisture and black mold to develop on the underside of the roof sheeting. First, they built a plastic tunnel from the front door up to the upper attic access door in the top of a closet near the bedrooms. This prevented any debris from the job filtering into the house as well as protecting the carpet. Next, they removed all the old insulation with the assistance of a giant vacuum. The black mold on the underside of our roof sheeting was treated and the new insulation installed. It now looks like a field of freshly fallen snow up there and no blocked vents."
11 neighbors recently requested a quote
Recommended by5%of homeowners
Avatar for Madrona Insulation
Madrona Insulation
4.9(
68
)

Serving Redmond, WA and surrounding areas

Approved

In business since 2009

Free estimates

Warranties offered

"It went very well from the estimate process. Rory took the time to explain the process. As I had questions, he took the time to talk to me and explain in detail. Deb coordinated the scheduling extremely well. Among the estimates I got they were the most reasonably priced. I started out only doing the attic. They did such a good job, I decided to go ahead and have the crawlspace insulated as well by Madrona Insulation. BTW, shout out to a terrific installation crew!"
.
.
7 neighbors recently requested a quote
Recommended by96%of homeowners
Avatar for Insulation Pro Inc.
Insulation Pro Inc.
5.0(
19
)

Serving Redmond, WA and surrounding areas

Approved

Super Service Award Winner

In business since 2025

Free estimates

Warranties offered

"We literally been roasted in our house especially on the second floor with that late heatwave going on . Eric from Insulation Pro took care of our attic. Full insulation replacement. Some mold problems and vents to reconnect . I was skeptic I even tested with the thermostat furnace but it literally did the job. Couldn't be happier."
Attic project
During job progress
During process
Crawl space full service
Before project crawl space

+59

Response time5 hrs
Response rate91%
8 neighbors recently requested a quote
Avatar for HomeRx
HomeRx
4.3(
110
)

Serving Redmond, WA and surrounding areas

Approved

Super Service Award Winner

In business since 2013

Free estimates

Credit card accepted

"They installed new insulation for us in an um-insulated attic space. They were well-priced, on-time, and very easy to work with. Workers all wore protective equipment and were both professional and friendly."
Masking off rooms
West Seattle custom
 Lead safe practices
Yard taped off for Lead Safe
 Keeping your home clean is important to us

+12

Response time1 day
152 neighbors recently requested a quote
Recommended by85%of homeowners
Avatar for Attic Doctor LLC
Attic Doctor LLC
5.0(
21
)

Serving Redmond, WA and surrounding areas

Approved

Super Service Award Winner

In business since 2023

Free estimates

Emergency services offered

"I've worked with many companies over the years doing upgrades to veterans homes and other home insulation projects but this company really stood out above the rest. Absolutely exceptional! Professional, high quality, competitively priced and his team did the work beyond my expectations. Completely removed old, contaminated insulation, treated the entire attic to remove mold and other contaminates and then replaced with top quality insulation "to code." I'll be recommending them for any future projects when restoring homes."
Response time12 hrs
Response rate96%
134 neighbors recently requested a quote
...
Showing 1-10 of 122
FAQs for batt, rolled or reflective insulation install or upgrade projects in Redmond, WA

Batt insulation excels in vertical installations because it remains firmly in place and delivers consistent thermal performance. Blown-in insulation performs exceptionally in spaces such as attics, efficiently filling gaps in irregular areas. 

Employing both insulation types according to their strengths enhances your home’s overall energy efficiency and comfort by providing a tailored solution for every space.

Start by measuring the square footage of the space, then match that area with the insulation thickness you need to hit your target R-value. Add a buffer for waste and odd-shaped spots so every cavity is covered. 

Once you have a rough count, run it past a local insulation pro—their on-site advice will fine-tune the numbers and help you avoid costly miscalculations.

Old insulation that is dry, intact, and mold-free does not require removal before adding new insulation; stacking new insulation over it maintains effective thermal performance and boosts energy efficiency. 

If the insulation is damp, moldy, or deteriorated, removal is necessary to eliminate health risks and ensure maximum effectiveness of the new layer. A professional insulation contractor will assess your situation and recommend the most effective solution.

Installing insulation in an average-sized home using batts or boards requires five to 12 hours. Using spray foam or blown-in insulation requires two to five hours. These timeframes are determined by the area’s size, accessibility, and whether old insulation must be removed. 

Complex projects and hard-to-reach spaces demand extra time. Hiring an experienced insulation professional ensures that the installation is completed efficiently and correctly.

Insulation is measured by R-value, which defines how effectively it resists heat flow. A higher R-value provides superior thermal resistance, ensuring your home remains warm in winter and cool in summer. 

Choosing the correct R-value is essential for maximizing energy efficiency and comfort, and it directly impacts long-term utility savings. Professional guidance determines the optimal R-value for your specific climate.

The Redmond, WA homeowners’ guide to batt, rolled or reflective insulation installs or upgrades

From average costs to expert advice, get all the answers you need to get your job done.