Get matched with top appliance (microwave oven) installers and replacers in Sherman, TX

"Jonathon was professional and assisted us with multiple projects. He installed a ceiling fan and helped us connect it to our phone. When a screw broke during installation, they promptly went to Lowe's to get a replacement. Afterwards, he installed a kitchen soap dispenser. I will definitely hire Jonathon again for future projects around the house"

"Bruce repaired our back door with amazing precision! It was an awkward metal door that was installed by a prior rehab contractor (over a year ago) from standard to wheelchair width door. The door was never flush or mounted correctly. As time went by, the door became unusable. Bruce tackled the challenge with ease and made the door fit snug, smooth & with a solid feel. For a little extra, he also installed a new storm door we purchased to the same back door. Even though he ran out of time on the first day, he returned the next day and cheerfully finished up and made sure that I was totally comfortable with the feel and sturdiness of the doors. He also suggested an additional safety lock which he picked up and installed that as well for both front & back doors. Once we get our foundation in order, if we have any other issues with any of our doors, we will be calling Bruce for estimates for those adjustments. Pilot Point is fairly far from most decent, reliable contractors. I can't tell you how many flaky guys are around who don't know their craft! Bruce made a difference in the quality of our lives; literally. I take care of my disabled hubby; unable to do even the simple things due to energy or time restraints. Our back door was taken from a 32" to 36" by a contractor we used a year ago. It was never installed correctly and was incomplete. It finally stopped working. Bruce gave a quote for the repair & re-installation, as well as for another nominal fee, to put in a new storm door. When he was done, our door finally fit properly and we now have a beautiful storm door bonus! There are no gaps; it is airtight, snug and easy to open & close. He pointed out where the other contractor missed some points, and showed what needed to be done & why. He was very patient. He did not rush, and actually came the next day to complete it to the level he wanted it to be. All of the "T's" were crossed and "I's" dotted, from what we saw when he was finished. Noting my hubby's handicapped status, Bruce also came up with suggestions of improving & smoothing over transition over the threshold. He adjusted the ramp from outside to fit the new door threshold location, and made helpful suggestions for the transition portion inside the house. He also noted additional safety measure we could install at our door lock area, and we asked that he put it in place, and he did so. Thanks, Bruce! It took a long time to find someone who knows what he is doing. We highly recommend Bruce for those jobs that seem overwhelming, but are very important to you, and they just have to be done. Bruce is the exception, as he knows what he is doing, and he does it very well. You may find his quote a bit high, but he does deliver quality craftsmanship, you get your money's worth and you will not be disappointed! Thank you, Bruce, for our wonderful back doors, and we WILL be contacting you for other projects in the future! You are a blessing!"

"Called Clark at LMT Repair. He gave me a quote, came to my residence as agreed, worked diligently and professionally. He evaluated my ice maker on my LG refrigerator, returned, and installed a new ice maker on 8/11/2022. I recommend this company for appliance repair based on my experience."

Hi, Cris here!\n\nIf it’s broken, leaking, uninstalled, or needs heavy lifting, I’ve probably fixed it before.\n\nI’ve spent the last several years working hands-on across the trades: 2 years doing interior remodeling from demolition to finish work, 3 years turning wrenches as a mechanic, 2 years on roofs handling full installs and repairs, 6 years delivering and hooking up major appliances, and months turning properties around with make-readies. Right now, I’m rounding out my skill set with welding.\n\nBy day I work full-time, but I run my own growing handyman business because I genuinely love helping people solve problems and talking through the work. I treat your house like my family lives in it. That means I show up on time, communicate clearly, and leave the workspace cleaner than I found it. No shortcuts, no mess left behind.\n\nSend me a photo or description of what you need done, and let’s get it crossed off your list.

"Honestly, I was ready to replace microwave over that was not turning on. The technician who showed up on time and was very professional, took the microwave oven out, repaired i and putting it back in a very reasonable time. Most likelt I will call them again if I need repair on my appliances. Thaks a bunch"

"Serviceman (Don) showed up at scheduled time and removed top of washing machine to inspect the bearings. He stated that the bearings were bad and would need to be replaced. The bearing kit and other parts would have totaled over 700.00 plus another 400.00 in labor so I decided to just buy a new washer to replace my 13 year old meile.
"

"Tom showed up exactly when he said he would. He did a great job installing the brick. I definitely would hire him again for another project!"

"Very knowledgeable installer and finished the job in a very timely manner. Would recommend to anyone who needs kitchen appliance installation in the Dallas/Fort Worth area."

"Bohannon Services provided efficient installation of equipment. All personnel were courteous and fairly well versed in their duties. Be sure to have Bohannon installers check for motor speed setting on the air handler before leaving your home. The ADP factory set our blower's motor on 'high' for a 36 ton CFM (air flow measurement), which proved to be too loud for comfort. The higher the tonnage of CFM the higher the motor speed from the factory. I had to consult with the manufacturer on how to adjust the blower's motor speed to a lower speed myself. Bohannon installed a 3 speed motor, but a five speed would allow for more variability of speeds and noise comfort. Not sure if all manufacturers of air handlers set the blower's motor speed in the same manner, so consult with the manufacturer first then the dealer/contractor. Good luck on your install. When you acquire estimates from BSC or any other HVAC, make certain that the items listed for installation are indeed installed once the work commences. Standard 'parts and labor' usually runs two years and up to 5 years depending on the HVAC. To obtain extended warranties on equipment, one has to apply for such at the manufacturers website with S/N and M/N in hand. Don't accept anything less than the best from any HVAC, your paying for it and you have to live with the results."

"I was expecting and prepared to have to tunnel or break concrete, but Morgan Leak Detection came in, located the leak and was able to bypass the bad line and reroute it with only a few simple to patch holes in the drywall. They were able to get a repair I expected to cost $7000 down to $2000. They are definitely not the cheapest guys in town if compared task for task, but they close the gap in service, honesty, and efficiency. I wanted a specialist for my problem and I was willing to pay to get the best. They delivered and I believe saved me a great deal of money in the long run. I had a friend with a similar problem a few weeks ago who got a huge quote from another plumber. I told her to give Morgan a call. Again, they found the leak and were able to perform a reroute that saved her money over the tunneling proposed by the other guy and Morgan was able to get to the job sooner to boot. This is definitely one of those cases of you getting what you pay for. They are a highly skilled company, do quality work, and won't try to jerk you around for more costly or complicated solutions. If you want it fixed right the first time, give them a call."