Top-rated interior trim and decorative moldings installers.

Get matched with top interior trim and decorative moldings installers in Stafford Springs, CT

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Interior trim and decorative moldings installers in Stafford Springs

Avatar for Alliance Home Improvement Inc
Alliance Home Improvement Inc
4.8(
210
)

Serving Stafford Springs, CT and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"Entire process exceeded my expectations from the initial contact I had with Alliance to the completion of the project. The proposal I received from Keith provided the level of detail I was looking for and he did a great job in going over the siding products Alliance offered to detailing all the necessary steps in the process. The installation process went very smoothly and was completed in a timely manner. The crew led by Serg were extremely professional, knowledgeable and focused. I could not be happier with the work they did and Serg kept me updated on how the project was progressing and was quick to reach out to me with any questions he had on the proposed installation approach. Therefore, I would recommend Alliance for any home improvement needs that you may need addressed. Lastly, I was so satisfied with the siding installation Alliance did I am now having them replace the two entry doors to my garage. Thank you again Sergiy, Keith, Serg and the rest of the installation crew. CFP Sr."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+54

Recommended by99%of homeowners
One Stop Remodeling
4.5(
124
)

Serving Stafford Springs, CT and surrounding areas

In business since 1982

Free estimates

Credit card accepted

"David Harris Painters did superb work at our home. Excellent repair carpentry and painting. They were highly professional and showed great craftsmanship and attention to detail.  They obviously wanted to do the best job possible, not just get the job done. We are very satisfied and would certainly use David Harris again.
"
This house had asbestos tile to be removed, rotted clapboard to be removed, several framing and insulation repairs, and reproduction moulding created on site and installed.
After work
reproduction trim
BEFORE
AFTER

+1

Recommended by84%of homeowners
Avatar for MYG Repairs and Remodeling, LLC
MYG Repairs and Remodeling, LLC
5.0(
10
)

Serving Stafford Springs, CT and surrounding areas

In business since 2016

Free estimates

"I hired Martin to install a storm door and again to replace broken cement sidewalk blocks and install drainage under the sidewalk from the down spout. Both times the work was done expediently, efficiently, and at a reasonable price. Mitchell Vasquez, the owner, and his workers are a delight to work with; reliable, respectful, responsive to the job and other concerns. I highly recommend this company for handyman and any other work for which he indicates he can do."
Response time2 days
Recommended by100%of homeowners
Avatar for Home Improvement Options, Inc.
Home Improvement Options, Inc.
3.8(
195
)

Serving Stafford Springs, CT and surrounding areas

In business since 1986

Credit card accepted

"The team at Kitchen Options did a tremendous job with cabinet refacing and installing new counters. The kitchen was transformed from a dark, oak wood based cabinet kitchen to a warm, inviting, and bright, white cabinet kitchen through refacing. The refacing team are experts in their craft, answered all of our questions, and left us with a new kitchen that is perfect for entertaining. We could not be happier with the cabinet refacing and countertops installed by the team at Kitchen Options."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+1

Recommended by76%of homeowners
Avatar for Vista Home Improvement
Vista Home Improvement
4.3(
419
)

Serving Stafford Springs, CT and surrounding areas

In business since 2005

Free estimates

Emergency services offered

"Yes the work was done. The two guys that came put in 7 windows and two big bay windows in one day. They did not even taken a break. They cleaned up the small pieces of scrap. Then one week later they came back and put in two new doors with the same professionalism when they did my doors."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+41

Recommended by87%of homeowners
Avatar for Brodowski Home Improvements
Brodowski Home Improvements
4.8(
83
)

Serving Stafford Springs, CT and surrounding areas

In business since 1999

Free estimates

Emergency services offered

"Fantastic! Dave Brodowski and his crew were superb. They worked long, non-stop days and did excellent work (.my dad was a contractor). They removed old siding, a backer used for the siding, and then the cedar shakes we had. They replaced any bad wood underneath. Then, they put new, better, thicker (waterproof) backing up, sealed the backing edges with tape; and put up the new siding. Took them 2+ weeks. They cleaned up multiple times. I would recommend them to anyone."
Reframed and decked
New EPDM rubber roof
Meadow st, Longmeadow. MA
Amherst St, Springfield, MA
Hilton St, Chicopee, MA

+8

Recommended by98%of homeowners
Avatar for The BullBag
The BullBag
5.0(
15
)

Serving Stafford Springs, CT and surrounding areas

In business since 2001

Credit card accepted

"It is very convenient, and reasonably priced.  The only thing that they could work on is the punctuality of the pick up times.  The rest of the experience was satisfactory.  My daughter has also used them.  I would highly recommend this service."
The BullBag truck in MA
The BullBag truck in NY
Toys for Tots
Recommended by100%of homeowners
...
Showing 1-10 of 59
FAQs for interior trim and decorative moldings installation projects in Stafford Springs, CT

Installing crown molding can be challenging, depending on the material and your skill level. Lightweight materials like polystyrene and softwoods are easier for homeowners to install themselves, offering a cost-saving option. However, heavier materials like hardwoods and plaster are difficult to work with and require professional installation to achieve a high-quality result. Precision is crucial in measuring, cutting, and fitting crown molding, so hiring a professional ensures the best outcome.

Crown molding is available at various price points, ranging from $1 to $30 per linear foot, depending on the material. This wide range offers options for every budget. Affordable materials like MDF, PVC, and polystyrene provide cost-effective solutions, while premium materials like exotic hardwoods or metal offer a luxurious appearance at a higher cost. Regardless of your budget, you can find crown molding that enhances your home's aesthetic.

Crown molding is installed by professional finish carpenters or painters who specialize in detailed trim work. These experts possess the necessary skills and tools to ensure precise measurements, accurate cuts, and seamless installation. By hiring a professional, you can achieve a flawless finish that enhances your home's aesthetic appeal without the risk of common DIY mistakes.

Crown molding can be installed in various areas of your house to add elegance and architectural interest. It is commonly used where walls meet the ceiling, but you can also place crown molding around doors, windows, mirrors, and atop cabinets. Installing crown molding in these locations enhances visual appeal, creates a cohesive design, and adds a touch of sophistication to your home's interior.

To determine how much crown molding to purchase, start by measuring the length of each wall where you plan to install crown molding and add the measurements together to determine the total linear feet required. Purchase an extra 10% of material to account for waste from cutting angles and to ensure seamless joints by using full-length pieces when possible. Including additional material helps avoid shortages and ensures a smooth installation process.

For a professional crown molding installer, this task takes about 1 to 3 hours per room, depending on size and complexity. Factors like the material, design intricacy, and number of corners can affect the time. If you're doing it yourself, expect it to take longer as you get the hang of measuring and cutting precise angles. Advanced measuring and planning or hiring a pro can help the project go smoothly.

The Stafford Springs, CT homeowners’ guide to interior trim and decorative moldings installations

From average costs to expert advice, get all the answers you need to get your job done.