Get matched with top carpenters in Duncansville, PA

"Jim did wonderful work on refinishing floors that had been carpeted. They are exactly how I remembered them. He explained everything along the way and contacted me when something came up that was unexpected (as one might have when carpet covers everything. He is timely and a wonderful personality to work with. I'm sure I will contact him again for other work."

"I had an excellent experience. They did exceptional work and the house looks 100x better. Ethan was my project manager and made sure I was happy with the end result!"

"I’d really like to take this time to thank rough diamond construction and Nate Miller for a wonderful wonderful job that they did for us. They took my bathtub and made a walk in shower, beautiful job and moved my washer and dryer upstairs where it was a lot more convenient for me and my husband to do laundry. I can’t thank them enough. They’re very courteous. They’re great if you ever need any kind of work done, I would highly recommend them to do the job. Thank you again Nate thanks for everything."

"Mr Cherry put 12 cabinet doors on and he also put new sets of door knobs our bath rooms and bedroom doors. He also repaired one of our kitchen drawers. His work is excellent and he is a very polite nice man. He was punctual and he cleaned up after himself. His cost was very affordable. We will be calling him again because we trust him to come into our home and do a great job."

"Terrific !!! Tony did a perfect job of cleaning our gutters and downspouts. He charges a very fair price and is the nicest person you would ever want to deal with. I absolutely recommend him to anyone that needs gutters cleaned. He also does plumbing and electrical work."

"They were very nice to deal with. They did a great job and cleaned up where as you wouldn't know anyone was here except for the new gutters."

"I knew it was going to be challenging to find an investor that would lend me money for this real estate venture.  I have lived 20 years in a four unit historic condominium building in downtown Jersey City and I wanted to buy the unit above me as an investment property.  But with Fanny Mae and Freddy Mac rules, they would not give me a loan because I would own half the building and this would give me too much control over condo association decisions.  I checked with Angie's List where Central Lending was well recommended and spoke with Mark, the president of Central Lending, about my situation and that I needed an unconventional loan outside of Fanny Mae and Freddy Mac oversights.  After many disappointments and on the very last day of my contract with the seller, Mark found a lender.  And on the very last day of the window to the loan, it closed.  I cannot thank Mark and his assistant Judy enough for their patience and steadfast of seeing this through.  I cannot tell you the emotional roller-coaster ride I went through during the 4 1/2 month duration.  There were many moments that I wanted to give up but Mark reassured me that the sale would happen.  Without Mark's personal intervention with the lender and title company, this deal would not have closed.   You can be sure that when I am in the market to buy unit #3, I will not hesitate to contact Central Lending.  Thank you so much."

"Andrew installed 2 retaining walls and did some landscaping. I was very pleased with his professionalism and the quality of his work. He does good hardscape and landscape work, but he worked alone much of the time and the scope of the jobs he can do is limited accordingly. I plan to hire him next spring for an additional project and would not hesitate to recommend him."

"The gentlemen were not only early because they knew it was going to rain, they were very polite, respectful, and did an awesome job. They even helped me move some extra furniture. I would definitely recommend this company. Thank you Pete(Derek) and Jeff."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"