Get matched with top mold and asbestos pros in Kentland, IN

"Experience was perfect in working with a professional service. Clear communication each day on arrival times and work being completed. All workers are professional and courteous. Even outlining the cleanup Bill was straight forward and direct about pricing and options for remedies. Made choosing Mold Pros easy. Make this your first call."

"Environmental Services was great to work with. Max is extremely knowledgeable and accommodating. He explained everything honestly and clearly. The asbestos in my basement was removed safely and quickly. Everyone with the company was very professional and courteous. Max suggested an epoxy covering for my basement floor which proved to be the perfect solution. I HIGHLY recommend Environmental Services for asbestos removal or any other services they provide."

"Mark and his team were very professional in the removal of asbestos and mold in our floors. We basically had to move out of the house, but Mark maintained consistent communication, sending pictures and calling every day to keep us updated on the progress of his job, as well as giving tips for the rebuilding process that was to come after. He gave a very reasonable price and completed the work quickly, even when he ran into difficulty with the underlying material. Absolutely would hire again."

"Robert was extremely prompt and knowledgeable. Took care of our asbestos testing very quickly and explained how the process would work."

"A-1 service. Prompt, clean and Professional. Highly recommend!"

"They found mold in an expensive home we were about to purchase. They might have saved us a lot of health and home issues."

"He ordered the parts and did the work around our schedula. Very professional service."

"The tech was prompt and professional. He answered the questions I had, completed the job quickly and cleaned up afterward."

"They were able to eliminate the mold in my house and kept me apprised as to what they found and what needed to be done to get rid of the mold."

"It was a small job. They sealed the vents to the crawlspace, then, since there was already solid insulation panels on the walls, put a vapor/moisture barrier, in the form of a tarp, 4 feet wide and as long needed, completely around the crawlspace. It was then sealed to the walls with "nails" and adhesive. This seals the wood frame of the house from the 'Outside", the ground, which is the floor of the crawlspace. A 20 mil thick, quite heavy, "floor" was installed, also in the form of a tarp, It went up the walls about 3 feet and was taped to the 'tarp" on the walls, using a tape made for this application. The piers were wrapped with the same stuff and taped to seal the inside from the outside. the "floor" is also a vapor/moisture barrier, but, heavy enough to walk on if needed. This basically makes the crawlspace another room, rather than the outside. Our house is one year old and was already getting mold on the floor joists. Since the air in the crawlspace will now be heated in the winter and cooled in the summer, just like the rest of the house, the mold and cold (52 degrees) floors we experienced last winter will hopefully be eliminated. We shall see when dumb winter gets here."