Get matched with top appliance (major electric appliance) installers and replacers in Bridal-veil, OR

"Excellent and fast customer service"

"I had to hire a local, appliance repair business who came to my house and reset the panel. He did not have to replace the latch ."

"They found out what the issue was, sadly it means getting a part or replacing the entire appliance. But at least we know now!"

competent thorough excellent communication and explanation

Hi, my name is Omar. I provide reliable handyman and home repair services. I focus on quality work, honest communication, and making sure customers are satisfied. I can help with home maintenance, repairs, installations, and general improvement projects. I take pride in being dependable, professional, and respectful of every customer’s home.

"The technician came the day after calling in the need for repair. He diagnosed the problem of needing the ignition replaced. He replaced the ignition and then tested the oven to make sure it worked. I was very happy with their quick response and being able to fix my oven. The technician was very courteous. Thank you for fixing my oven. I would definitely use them again."

"Professional, prompt & came prepared with parts to fix our older refrigerator. The service call price of $126 is high, but the quality of work is good."

"Great service! I will be returning to them for all my appliance repair needs."

"I have never written a review for a company. I usually just let it go. I am inspired to write this one. First job was an active leak after hours. They were on top of it with an on-call team. It was expensive as expected after hours. Jordan went above and beyond. When he needed something from the truck - he would run there and back! Cost was $575 and could have been a lot worse. Give this an A on this job. Second job was routine replacement of a frost free hose bib/spigot. I rehired this company because of the previous work done. They started the clock once they start driving to you which, unfortunately sounds common. Ryan seems knowledgeable and is nice. Instead of checking with me about moving a wire he just piped around it so the wire is now trapped in a loop of plumbing. It's high voltage 220 to the stove under the sink. We talked about what it would take to revise. He said a hour. This was not worth it to me nor was haggling about it. Now, the plumbing circuit to the hose bib sticks out 6 1/2 inches and traps the hardwired 220 to the stove. To be fair, it sounds like he could only bring this back about 1 – 2 inches max if you remove the wire. But I have a strong feeling that running at 220 wire through copper piping carrying water is not code. Even if it is, just seem like something you would redo if you found yourself accidentally doing this yourself on your own place. The cost of the work $310 I give this job and D+"

"Our CPVC house piping had a lot of water hammer. After turning on the washing machine, I walked out for a moment, and then when I came back in water was dripping from the ceiling exhaust fan onto the washing machine. We have a two story house and they ran the hot water plumbing from the water heater in the garage through the laundry room ceiling. I removed the exhaust fan and could see water dripping from a tee way back beyond reach. The water hammer from the washer likely caused the fitting to start leaking. I turned the house water supply off and sent a message to Simpson plumbing through Angie's list. A lady from Simpson plumbing contacted me right away the next morning. She was courteous, but was having a hard time understanding what the problem was. Maybe I was giving too much information or something, but when the plumbers arrived later that afternoon they didn't understand what was going on. I ran through what happened again and showed them the wet spot on the ceiling. They had to cut an opening in the ceiling and we turned the water on and confirmed the leak. We moved my washing machine out of their way and they cut out the CPVC tee and replaced it with PEX. The piping was brittle so it took him a couple of attempts to get a straight cut which is why I called them to mess with it. After installing the PEX tee, we were leak free and at my request they provided a reference for the drywall repair. He also advised getting some water hammer arrestors installed on the supply lines to the washing machine to stop the water hammer, which I have since done."