Top-rated mold & toxic material testers.

Get matched with top mold & toxic material testers in Dodge City, KS

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Mold & toxic material testers in Dodge City

Avatar for FreshCo, LLC
FreshCo, LLC
4.7(
65
)

Serving Dodge City, KS and surrounding areas

Approved

In business since 2015

Emergency services offered

Warranties offered

"I'll finish review later if app allows it. I'm still learning how to use it! : ) Freshco has been great so far. Andrea, 1st contact,, was so nice and highly knowledgeable. She had Ben contact me with info on there service, what they can do, and cost. He was fantastic! They called me to ask if could reschedule due to an emergency service needed to be done...I said no problem of course - They came on a Sunday! ? Professional, courteous, knowledgeable all the way! He advised me that if I have mold damage, it's not as bad...he explained it would be cheaper and just as efficient to have carpet in area reviewed replaced. I need to confirm I got email of the evaluation results before I complete this review. So far might earn 5 of 5 ?!"
Mold Inspection
Mold Inspection
Mold Inspection
Mold Inspection
Mold Inspection

+25

Response time1 day
Response rate92%
4 neighbors recently requested a quote
Avatar for American Metropolitan Environmental Inc
American Metropolitan Environmental Inc
5.0(
6
)

Serving Dodge City, KS and surrounding areas

In business since 1995

Free estimates

Warranties offered

"David Moreland came out and looked at the problem I had with an odor and and water leakage I had but could not figure out where it came from or if it was mold. He verified that there was moisture in the walls and and possibly mold. He told me I needed to take about 2 feet of sheet rock off of the wall and he would come back to check for mold. When i called him on Monday morning he came back that afternoon and showed me where the mold was and told me what I needed to do. He was very informative and professional. <br />"
Recommended by100%of homeowners
Avatar for ACM Removal-Kansas, LLC
ACM Removal-Kansas, LLC
5.0(
12
)

Serving Dodge City, KS and surrounding areas

In business since 1996

Free estimates

Warranties offered

"Large area that had been blocked because I had boxes that had not been removed. There was mold around the west masonry wall and into the closet area on the north wall which was also masonry. We found this when the drywall was removed and in addition there was mold in the drywall area where the semi finished basement separates from the unfinished basement. This was primarily mold that was in the concrete basement floor extending into the wall and extended to the furnishing that were on the floor that was in proximity to the area, the semi finished portion to the unfinished but they did not treat the drywall area because again that was drywall and because they mainly focused on the masonry. In terms of Wichita, they are probably one of the few specialist. They are clearly a specialist, and they clearly have the credential based on my understanding and my discussion with them. They have the certification that would be the legal qualification in the documents to back it up. They were working under some conflict with a firm that came in to do the flood and water mitigation. They were there at the same time when they came to inspect the mold. There were some difference of opinion and the ACM staff were fairly persistent that it was very important to remove the material so they can actually get to the masonry. There were conflict with the staff that they did not believe that the mold mitigation people should remove the covering that was drywall and combination of cedar covering that could not determined what was underneath until it was removed. ACL insisted that the covering be removed to determine what was underneath. I approved it and went ahead they found that indeed the mold had extended. They were spot on right. I thought that was professional in their part that they did not blackout."
Recommended by100%of homeowners
Avatar for Lester Inspection Services, Inc.
Lester Inspection Services, Inc.
4.9(
27
)

Serving Dodge City, KS and surrounding areas

In business since 2006

Free estimates

Emergency services offered

"While you and I were enjoying our day off on September 4th (Labor Day), Craig Lester, of Lester Inspection, was conducting a very thorough inspection of the Stucco exterior on my new town home purchase. Craig responded immediately on August, 31st to a call from my buyer's agent, Doug Mitts, inquiring about Craig coming out on the 4th. We were up against an inspection deadline at midnight on the 5th. Craig delivered, and then some. He spent approximately 4 hours, scouring and testing the Stucco exterior section by section. He displayed tremendous professionalism, and explained in great detail the tests he was conducting, both verbally to my buyer's agent, and then written in a very detailed and complete report. Not only did he test the Stucco completely and thoroughly, he also provided feedback and guidance on an item of concern from the home inspection report regarding potential water entry in the basement. I would recommend Lester Inspection Services, at [*** Link removed ***] for all of your inspection needs. And he only tested the Stucco!!!"
Recommended by96%of homeowners
Showing 1-10 of 15
FAQs for mold & toxic material test projects in Dodge City, KS

Some companies offer a no‑cost phone or video consultation that screens for red flags. If the discussion points to a real issue, the pro will recommend a paid on‑site inspection. The complimentary call clarifies whether you need full testing, but it isn’t a substitute for samples, lab work, or a written report. Always confirm what the free service covers before you schedule.

A standard inspection, which includes basic air and surface samples, takes an average of two hours. If the pro needs to probe hidden spaces, such as wall cavities or ductwork, plan on up to six hours. Extra time allows the inspector to reach tight areas, collect additional samples, and document findings. Lab analysis is a separate process and often adds several business days to the overall timeframe before you receive the full report.

Mold thrives where moisture lingers and air flow is poor. Common hotspots include bathroom walls, kitchen backsplashes, window sills, HVAC vents, fireplaces, crawl spaces, and enclosed attics. Check these areas regularly—especially after leaks or high‑humidity weather—to catch growth early and avoid costly repairs.

Unchecked mold can knock 20% to 37% off a home’s market value because buyers worry about hidden damage and health risks. Even after remediation, visible staining or a history of major moisture issues can still lower offers and prolong the time on the market. Addressing mold quickly protects both your property’s structural integrity and its resale appeal.

The Dodge City, KS homeowners’ guide to mold & toxic material tests

From average costs to expert advice, get all the answers you need to get your job done.