Top-rated steam shower installers.

Get matched with top steam shower installers in Itasca, IL

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Steam shower installers in Itasca

Avatar for PACS Automotive

PACS Automotive

5.00(
1
)

PACS Automotive

5.00(
1
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

PACS Automotive is a Domestic and Import Auto Repair Shop. We have the best prices in the area. We offer 24hr Towing, Car Rental, Shuttle Service When Available. Financing Available as well as special discounts on our already great prices for Company/Fleet Services and Repairs.

PACS Automotive is a Domestic and Import Auto Repair Shop. We have the best prices in the area. We offer 24hr Towing, Car Rental, Shuttle Service When Available. Financing Available as well as special discounts on our already great prices for Company/Fleet Services and Repairs.


SC Home builder inc

1.00(
1
)

SC Home builder inc

1.00(
1
)
Free onsite estimate

Listed roofing contractor and city of chicago general contractor

Listed roofing contractor and city of chicago general contractor


chicago heating & air conditioning

No reviews yet

chicago heating & air conditioning

No reviews yet
30 years of experience

When your appliances are on the fritz, don’t try to be a handyman when you’re not. Call US. for the north side of Chicago’s most affordable appliance repair. Professional repairs and honest advice Is your refrigerator not cooling? We’ll professionally diagnose the problem and fix it correctly so it doesn’t happen again. If the repairs cost more than the appliance, we will tell you so. We’ll provide you with an honest quote rather than try to repair an appliance that will just cost you more to repair later on. We’ll figure out what’s wrong with your appliance and fix it fast: •Refrigerator Repair – Not cooling, not dispensing water, not making ice or leaking water? •Washer Repair – Not agitating, not spinning, not draining water or not advancing through cycles? •Dryer Repair – No heat coming out of your dryer, drum not turning, or making loud noises? •Stove Repair – No heat in your oven or have your burners gone bad? •Dishwasher Repair – Leaking water, dishes not getting clean or making noises? •Microwave Repair – Not heating food or won’t turn on? •Cooktop Repair – Burners not working or won’t turn on? Save yourself a headache – let the professionals install it Did you recently purchase a new washer and dryer but don’t know how to install them? Don’t worry. Call the factory-trained technicians for professional installation. Get professional appliance repairs at an affordable price. Call US at 312-533-8387 for same day service.

When your appliances are on the fritz, don’t try to be a handyman when you’re not. Call US. for the north side of Chicago’s most affordable appliance repair. Professional repairs and honest advice Is your refrigerator not cooling? We’ll professionally diagnose the problem and fix it correctly so it doesn’t happen again. If the repairs cost more than the appliance, we will tell you so. We’ll provide you with an honest quote rather than try to repair an appliance that will just cost you more to repair later on. We’ll figure out what’s wrong with your appliance and fix it fast: •Refrigerator Repair – Not cooling, not dispensing water, not making ice or leaking water? •Washer Repair – Not agitating, not spinning, not draining water or not advancing through cycles? •Dryer Repair – No heat coming out of your dryer, drum not turning, or making loud noises? •Stove Repair – No heat in your oven or have your burners gone bad? •Dishwasher Repair – Leaking water, dishes not getting clean or making noises? •Microwave Repair – Not heating food or won’t turn on? •Cooktop Repair – Burners not working or won’t turn on? Save yourself a headache – let the professionals install it Did you recently purchase a new washer and dryer but don’t know how to install them? Don’t worry. Call the factory-trained technicians for professional installation. Get professional appliance repairs at an affordable price. Call US at 312-533-8387 for same day service.


AVEA Inc.

5.00(
3
)

AVEA Inc.

5.00(
3
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

AVEA is a Home Automation and Security Alarm Contractor specializing in Control4 automation systems and Honeywell intrusion systems.

AVEA is a Home Automation and Security Alarm Contractor specializing in Control4 automation systems and Honeywell intrusion systems.


Avatar for DETAIL KITCHENS

DETAIL KITCHENS

5.00(
24
)

DETAIL KITCHENS

5.00(
24
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Detail Kitchens provides design and installation expertise that stems from our 44 years of experience. Whether you're remodeling your kitchen or building a new home, we will work together to transform your dreams into a kitchen that's not only beautiful but completely functional, efficient, and appropriate for your lifestyle. 6 employees. Uses Subs for Electrical & Plumbing. Cost is determined by the job. No travel charges.

Detail Kitchens provides design and installation expertise that stems from our 44 years of experience. Whether you're remodeling your kitchen or building a new home, we will work together to transform your dreams into a kitchen that's not only beautiful but completely functional, efficient, and appropriate for your lifestyle. 6 employees. Uses Subs for Electrical & Plumbing. Cost is determined by the job. No travel charges.


Avatar for American Backflow & Fire Prevention, Inc.

American Backflow & Fire Prevention, Inc.

3.50(
2
)

American Backflow & Fire Prevention, Inc.

3.50(
2
)
Customers say: Quality work
77 years of experience

We are a small family owned operation, with 12 employees and have been in business since 1949. We strive to be the most reliable, and competitive service provider in the industry.

We are a small family owned operation, with 12 employees and have been in business since 1949. We strive to be the most reliable, and competitive service provider in the industry.


cba architecture & consulting LLC

No reviews yet

cba architecture & consulting LLC

No reviews yet
17 years of experience

Architectural and Interior Design Services

Architectural and Interior Design Services


T.P.F. Construction Inc

No reviews yet

T.P.F. Construction Inc

No reviews yet
18 years of experience

TPF Construction Inc. is a family owned business. We specialize in Kitchen and Bathroom remodeling. Our company offers a wide variety of services. Customer satification is our priority. We offer free estimates on all our services and all our work is on time,warranted for one year. We are bonded and insured.

TPF Construction Inc. is a family owned business. We specialize in Kitchen and Bathroom remodeling. Our company offers a wide variety of services. Customer satification is our priority. We offer free estimates on all our services and all our work is on time,warranted for one year. We are bonded and insured.


Eichele and Valene Remodeling

2.25(
4
)

Eichele and Valene Remodeling

2.25(
4
)
Customers say: Terrific value
14 years of experience

Service is our priority! We build our company on quality and good service. Let us know how we can help meet your renovation needs!

"Ed Eichele has stated to us that he stands by his work and that he will do whatever it takes, that they are accommodating, open and transparent. Beware, Ed knows all the right things to say, just don’t believe any of it. Following are the issues we had with Eichele & Valene Remodeling: • Needed to hire a second contractor to rip out and replace our newly installed tile floor and takeover our project. • Had to remove and replace wood trim • Paint quality grade with option of 2 brands stipulated in our contract was not followed. An untrue story was given as to why a cheaper grade had to be used. • Promises of a building permit and an inspector appointment never materialized (3 months). After blaming the City of Wheaton building department for an unexplainable lack of action it turned out that the city never received payment for the permit we paid Eichele & Valene to execute as part of the contract. • Our walls were painted and floor installed before the plumbing and electrical work had been started let alone the drywall being finished. Our second crew took advantage of the floor being exposed to perform plumbing and electrical work by removing floor boards vs. access through the basement ceiling as was planned by John Valene. • Lack of a consistent work schedule; multiple no-shows without warning. • They still owe us money per their own records. Details: Tile – Through research of manufacturer’s websites, the Tile Council of North America, and consulting with a member of National Tile Contractors Association, we were able to confirm that the tile floor was laid improperly and needed to be 100% replaced. Some of the installation related issues: Our warranty for the subfloor and the tile was void due to the use of cheap drywall screws used to fasten the Durock subfloor rather than the required “1-1/4" USG Durock™ Brand Tile Backer Screws for wood framing (or equivalent) or 1-1/2" hot-dipped galvanized roofing nails”. As a result of improper installation, there was so much unevenness and lippage all over the floor that we were tripping while walking on the tile. Nothing sat squarely or level on it. The lippage of many tiles was the same thickness as a quarter or thicker. (See photos) Trim – We upgraded our family room from carpet to tile. It may not be obvious to all homeowners that the baseboards are installed prior to installing carpet, thus touching the floor that the padding and carpet are rolled over. For tile, the baseboards should be installed on top of tile, which put the baseboards noticeably higher on the wall. Since the baseboards were never removed prior to installing the tile the end result was a family room with oddly short baseboards as they did not sit on the tile where it should be if installed correctly. Furthermore, the staining and varnishing of the shoes was dreadful. Application of conditioner, stain and urethane was performed outside in 40 degree weather all within 6 hours. Per the Sherwin Williams website one needs to, “Let dry completely (usually 24 hours)”. In addition, the site states that one should; “Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 Fahrenheit.” The worst part about this baseboard fiasco was the calculated deception exercised where the eating area meets the family room. They removed baseboard from the eating area where it was installed at the correct height for tile to rip ¾” off of the bottom in order to match the height of the baseboard of the family room which was at the correct height for carpet. (See photo) Paint – We believe that painting before the drywall, plumbing, and electrical work were finished was a tactic employed to give us the illusion of progress after weeks of no work being performed. It was an obvious ploy to distract us from the fact that no progress had been made in weeks. We have since had to repaint all surfaces but 3 walls. Windows – There is an entire fiasco with regard to undersized windows being installed. The additional framing required to install windows that were too small led to the threat of additional “Change Order” costs. One might question why someone would install the wrong size windows. Menards remade the incorrectly sized windows as ordering the wrong size windows was their mistake. Eichele & Valene told us that we owed them the cost of a second installation even though they should have stopped when they realized that the windows were the wrong size. (See photo)"

Tom M on February 2019

Service is our priority! We build our company on quality and good service. Let us know how we can help meet your renovation needs!

"Ed Eichele has stated to us that he stands by his work and that he will do whatever it takes, that they are accommodating, open and transparent. Beware, Ed knows all the right things to say, just don’t believe any of it. Following are the issues we had with Eichele & Valene Remodeling: • Needed to hire a second contractor to rip out and replace our newly installed tile floor and takeover our project. • Had to remove and replace wood trim • Paint quality grade with option of 2 brands stipulated in our contract was not followed. An untrue story was given as to why a cheaper grade had to be used. • Promises of a building permit and an inspector appointment never materialized (3 months). After blaming the City of Wheaton building department for an unexplainable lack of action it turned out that the city never received payment for the permit we paid Eichele & Valene to execute as part of the contract. • Our walls were painted and floor installed before the plumbing and electrical work had been started let alone the drywall being finished. Our second crew took advantage of the floor being exposed to perform plumbing and electrical work by removing floor boards vs. access through the basement ceiling as was planned by John Valene. • Lack of a consistent work schedule; multiple no-shows without warning. • They still owe us money per their own records. Details: Tile – Through research of manufacturer’s websites, the Tile Council of North America, and consulting with a member of National Tile Contractors Association, we were able to confirm that the tile floor was laid improperly and needed to be 100% replaced. Some of the installation related issues: Our warranty for the subfloor and the tile was void due to the use of cheap drywall screws used to fasten the Durock subfloor rather than the required “1-1/4" USG Durock™ Brand Tile Backer Screws for wood framing (or equivalent) or 1-1/2" hot-dipped galvanized roofing nails”. As a result of improper installation, there was so much unevenness and lippage all over the floor that we were tripping while walking on the tile. Nothing sat squarely or level on it. The lippage of many tiles was the same thickness as a quarter or thicker. (See photos) Trim – We upgraded our family room from carpet to tile. It may not be obvious to all homeowners that the baseboards are installed prior to installing carpet, thus touching the floor that the padding and carpet are rolled over. For tile, the baseboards should be installed on top of tile, which put the baseboards noticeably higher on the wall. Since the baseboards were never removed prior to installing the tile the end result was a family room with oddly short baseboards as they did not sit on the tile where it should be if installed correctly. Furthermore, the staining and varnishing of the shoes was dreadful. Application of conditioner, stain and urethane was performed outside in 40 degree weather all within 6 hours. Per the Sherwin Williams website one needs to, “Let dry completely (usually 24 hours)”. In addition, the site states that one should; “Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 Fahrenheit.” The worst part about this baseboard fiasco was the calculated deception exercised where the eating area meets the family room. They removed baseboard from the eating area where it was installed at the correct height for tile to rip ¾” off of the bottom in order to match the height of the baseboard of the family room which was at the correct height for carpet. (See photo) Paint – We believe that painting before the drywall, plumbing, and electrical work were finished was a tactic employed to give us the illusion of progress after weeks of no work being performed. It was an obvious ploy to distract us from the fact that no progress had been made in weeks. We have since had to repaint all surfaces but 3 walls. Windows – There is an entire fiasco with regard to undersized windows being installed. The additional framing required to install windows that were too small led to the threat of additional “Change Order” costs. One might question why someone would install the wrong size windows. Menards remade the incorrectly sized windows as ordering the wrong size windows was their mistake. Eichele & Valene told us that we owed them the cost of a second installation even though they should have stopped when they realized that the windows were the wrong size. (See photo)"

Tom M on February 2019


Avatar for Jim Wagner Plumbing, Inc.

Jim Wagner Plumbing, Inc.

4.44(
43
)

Jim Wagner Plumbing, Inc.

4.44(
43
)
Customers say: Super punctual
20 years of experience

We are family owned and operated with three generations of experience. All our team members are dedicated to doing everything we can to ensure that your experience with us is the best that you have ever had. When you call, you will be greeted by the friendly voice of a knowledgeable professional. You will be treated with courtesy and respect. Our technicians are trained in their respective trade and take great pride in knowing that they will be able see your project through completion. Call us now!

"I called to inquire about a rattle in the garbage disposal and a slow drain in the sink. $50 to get him to flip on the switch and listen. He said the disposal is shot and would need to be replaced. A 1/3 horsepower was needed because anything stronger would not be ideal. They don't carry any 1/3 HP disposals. So after a quote for $500+ for GD replacement and $200+ for rodding the drain, the estimate all totaled was near $800! Paid the fifty bucks for the house call but declined to pony up the rest. Called a local handyman who opened up the disposal and removed the problem without replacing it for $40. works fine - and he unplugged the drain. Buyer beware of stings like this from companies who take advantage of customer ignorance."

John M on February 2024

We are family owned and operated with three generations of experience. All our team members are dedicated to doing everything we can to ensure that your experience with us is the best that you have ever had. When you call, you will be greeted by the friendly voice of a knowledgeable professional. You will be treated with courtesy and respect. Our technicians are trained in their respective trade and take great pride in knowing that they will be able see your project through completion. Call us now!

"I called to inquire about a rattle in the garbage disposal and a slow drain in the sink. $50 to get him to flip on the switch and listen. He said the disposal is shot and would need to be replaced. A 1/3 horsepower was needed because anything stronger would not be ideal. They don't carry any 1/3 HP disposals. So after a quote for $500+ for GD replacement and $200+ for rodding the drain, the estimate all totaled was near $800! Paid the fifty bucks for the house call but declined to pony up the rest. Called a local handyman who opened up the disposal and removed the problem without replacing it for $40. works fine - and he unplugged the drain. Buyer beware of stings like this from companies who take advantage of customer ignorance."

John M on February 2024

...
Showing 1-10 of 1002
FAQs for steam shower installation projects in Itasca, IL

A steam shower is a regular shower stall outfitted with a steam generator. Push a button, and the generator heats water to create soothing steam, and you’ve got an instant spa at about 110°F. Because it doubles as a standard shower, you don’t need extra square footage—just the right plumbing, a sealed enclosure, and proper ventilation.

Expect to spend roughly $0.50 to $1 on water and electricity for a 20- to 30-minute steam session. Actual costs depend on your local utility rates, but most homeowners find that the increase on their monthly bill is modest, even with regular use. To keep ongoing costs down, look for an energy-efficient generator and ensure your shower is properly sealed to prevent heat loss.

Flush the generator regularly to remove mineral buildup and maintain a steady steam flow. Most models have a drain valve or button—hit it after each session or as the manufacturer recommends. Skipping this essential maintenance step can trigger safety shut-offs or shorten the lifespan of your steam shower.

It’s not uncommon for homeowners to discover mold in their steam showers. Steam equals humidity, and humidity invites mold. Run the bathroom fan during and after each session, crack the door to allow air circulation, and wipe down the walls frequently. If you spot mold, spray undiluted white vinegar, wait an hour, then scrub—it’s an easy, chemical-free fix.

The Itasca, IL homeowners’ guide to steam shower installations

From average costs to expert advice, get all the answers you need to get your job done.