Get matched with top traditional tile roofing installers and replacers in Maybee, MI

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

"Was very pleased with the service. He was on time and respectful. I appreciated that he took the time to point out some cracks that needed attention on the chimney, and showed me how to do it myself. He was honest about how often the sweeping should be performed. It is clear that he cares about his customers and isn't there to rip them off. He even explained how to do the service myself if I wanted to.
"

"Lucas came out as promised the next day. He was thorough, professional and friendly, and I appreciated that he responded when others would not. Despite the inclement weather, he climbed onto the roof and checked everything out. After his inspection he took the time to explain exactly what we were dealing with. We will be needing a new roof once the winter weather leaves our area. But when we are ready to have one installed, this time I won't be searching for a roofing contractor. I now have one. . Lucas will get the job!"

"Hamdan Quality Roofing was able to provide a great product at a very good price point. Other companies are potentially 1.5x or 2x the price. They can provide a good price because they are family owned/operated, they own a metal roll forming machine where other may not, and they make their own fittings (z-bar, ridge cap, w-valley channel, end caps, etc). It is very important to understand the differences in what you get with metal roofing products as there are so many variations and they are transparent about the different products. They can quote agricultural panels (exposed fastener panels), shingles, and standing seam (concealed fastener). I went with a 24-gauge metal standing seam (concealed fastener). They were able to put it right overtop of the first layer of shingles (with a synthetic barrier) which some other contractors may or may not quote it that way. They own their own metal roofing roll forming machine (Englert Machinery - model FP1101), they purchased large rolls of metal from CMG metals, and they had a metal bending machine in their trailer to bend their fittings (ridge cap, z-bar, w-valley flashings, drip edge, eave end cap, ect). The panels were made on site which was cool to watch. They installed S-5 Colorgard snow bars. Some hiccups with the permitting but it was approved by the township after the township dropped the ball on a couple things. I would highly recommend them to anyone looking to install a metal standing seam roof."

"My roof is happy again!! All of the crew were very polite!"

"This is an amendment to my first review to reflect the most accurate price paid for everything included. The work was performed very timely and professionally. A1 roofing is exactly that A1! I was very impressed with every aspect from start to finish!! Thank you so much"

"This is my second time working with Brand New Construction. We had our insulation done by them last year. They replaced our roof this spring. Looks great."

"I REALLY liked the salesperson that we bought it from. HE was excellent. When there was a glitch with our siding order, he came back out to check things out. HOWEVER, the guy who put up our siding was not real particular. He cut off our gutters when they were to be removed and re-hung. I AM pleased that the company replaced them without any hassle. The siding was over hanging the gables. It wasn't until we said something that he fixed it. That was the overall problem. Unless we caught a problem, it would have remained. While it might be our house itself, the siding installment is not what I'd consider "A". I don't think that I should be the one pointing out mistakes and getting them fixed. I think that they should have just been fixed. I'm glad that the guy was nice. But the end result was not installed like we had pictured."

"

The best way to start this is to describe the entire remodeling as it went down.  We found companies on Angie?s List that would do windows, siding and remodeling of our back sun room.  We had were old single pane windows with a spring loaded aluminum side casing. They were cracked and very hard to open and close. The back sun room had a door we do not use and two steps from the kitchen to the room (about 15 inches high each), the floor also had a hole from a rotted out piece of plywood.

After meeting with high pressure salesman and companies that would only do windows and siding we selected Elite Builders. The president of the company was very personable and seemed to really care what we wanted. We told them that we had a limit of $30,000.00 for the project.  After taking measurements and looking over the project they came back with an estimate of $30,000.00. We signed a contract in August of 2014 with half of the $30,000.00 down. We did add a garage door front porch railing and two entry doors to the project for about $4,000.00. We were introduced to the on-site manager at this time. He had been a plasterer and was moved to the manager?s job due health reasons. After a week they sent a new employee with a representative from the local building supply firm to measure for the windows.  This representative told us that what we wanted was not what we should have and proceeded to his measuring instructing the new employee as he went. The windows were to be new install (with mounting flanges versus remodel windows with no flanges) as flanges seal better for weather proofing.

After a couple of weeks the windows arrived and were placed in the garage, the siding was placed outside near our garage. Another week went by and the windows/siding crew arrived (10 employees from a sub contractor).  I later found out that Elite only had about 10 employees and was only a general contractor. In about 3 days they had all of the old aluminum siding taken off and the new siding up and windows in. The old siding (worth about $4-500.00 at today?s prices was placed on my neighbors lawn. They then charged me $300.00 per load to remove the old debris and aluminum, it took about 3 trips. My written estimate did not show any credit for the scrap value of the aluminum, and I found out later that they used their own trailer for the debris and had a dumping permit ($30.00-40.00) at the landfill.  In the process for installing the siding the trampled my 29 accent lights in my bedding, I now have 3 left working. Some of the windows are retro fits with mounding holes for reinstall holes in the sides, to be covered by plugs. I have never seen shimming with 2x4?s and 1? lumber to get the windows in the old openings, it seems that they ordered smaller windows than were needed and put in lumber to make them fit.  In this process we had to completely re-plaster every room because of the smaller windows. They did offer to put new trim around all windows which would have cost about $1,500.00. They stained the trim to match our existing woodwork but when it arrived it looked like a camouflage patchwork of paint. We asked them to try again. Since it was the middle of winter we both agreed it would be too much odor to polyurethane the wood then.

It took quite a while before they were able to get started on the sun room, as they also get work from boarding up fire damaged homes and get a retainer from the insurance company. They had the same crew that did the siding work on the porch remodel and had the floor and steps removed in a day. The new flooring was installed as well as the 6 foot sliding door. The carpet was then laid down.  After a day the carpet was sucked down into the ½? gap between the sheets of plywood as they did not fill in the gap. The carpet was pulled up and the gap filled in with wood putty, and re-laid. They put up a new set of stairs (now 4 steps) and put in a railing that was similar to an outside porch/pool railing. We had paid for an ornamental railing and newel posts. When we stated that it was not acceptable they ripped the railing out. In the process of putting down the floor they left the wiring above the floor.  They had to remove the floor to place it under the new sliding door. They then found that the floor had severe squeaks and had to rip it up again to add more stabilizers under the 2x4?s. They had placed the insulation on the old concrete and when the floor had any weight it would act like a spring and squeak. It still squeaks today.

They had another pair of workers come and put in the ornamental railing and outside railing.  They did an outstanding job. We also found out that we only had a 60 amp service (like everyone else in out neighborhood) and the old XO series breakers that they do not make any more. We decided to upgrade to a 160 amp service at this time, with new service head and a main disconnect.   They also did a great job and had it done in a day at another $2,000.00.  They were also subcontractors.

It is now April 2015 and we are nearing the finish line. There were many small items that needed fixed after our review. Some still go unanswered, we were shown one outside railing and they installed a different one. We asked to have screen door that could reverse the screen from the bottom to the top (prevents my grandson from pushing it out) It looks as if it cannot be switched. They did adjust our total bill down from the charging of two pairs of ornamental railing for the sun room down to one.

"

"Another vendor I spoke with wanted to tear my entire roof off, but this company told me they could repair the garage without having to tear it off. He was honest and told me some things about my house roof repair that I already knew about the venting. He also told me some things I did not know. We played phone tag a little bit, but it was not his fault."