Top-rated sump pump or interior foundation drains installers.

Get matched with top sump pump or interior foundation drains installers in Rolla, KS

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Sump pump or interior foundation drains installers in Rolla

Avatar for American Home Shield – Home Warranty
American Home Shield – Home Warranty
3.5(
5,688
)

Serving Rolla, KS and surrounding areas

In business since 1971

Credit card accepted

"Rather than fix the issue the first 2 calls, more refrigerant was pumped into the system. This cost me $75 for each call plus the cost of the refrigerant. The 3rd time, they fixed a valve and refilled the refrigerant and I am monitoring to see if this really fixed the problem. So I am out $225 for service calls fro the same problem and the cost of the refrigerant. I think they take this approach intentionally."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by65%of homeowners
Request Quote
FAQs for sump pump or interior foundation drains installation projects in Rolla, KS

Most residential pumps draw approximately 1,300 to 2,900 watts when they first start, then settle at roughly 800 to 1,050 watts during normal operation. The exact number depends on the motor’s horsepower and how often the float switch tells the pump to run. Even at the high end, the electricity cost is minor compared with the expense of cleaning up a flooded basement.

Grab a ruler and an empty 18‑inch‑wide pit. During a steady rain, time how much the water rises in one minute. Multiply that depth (in inches) by 60 to calculate gallons per hour, then add 50% for safety. If the result tops 2,100 gallons per hour—about 35 gallons a minute—you’ll need a 3/4‑horsepower unit. Anything lower, and a 1/3- or 1/2-horsepower pump should do the trick.

Loud rattling, constant cycling, or shuddering vibrations are the pump’s way of telling you it’s on its last legs. Musty smells, higher electric bills, and visible rust are other red flags. If the unit is 10 years old or older and exhibits any of these symptoms, replace it before the next heavy rain turns your basement into a wading pool.

You don’t have to hire a licensed plumber, but you should still bring in someone who installs sump pumps for a living—whether that’s a plumber, basement‑waterproofing specialist, or experienced handyman. They know the local codes, can wire the pump safely, and will test the system before they leave. Skipping professional help might void the warranty and could leave you with a pump that fails when you need it most.

Not every basement needs a pump, but if your home sits in a floodplain, has a high water table, or has ever taken on water during a storm, a sump pump is inexpensive insurance. For basements that only struggle with condensation or the occasional damp spot, sealing cracks and improving drainage may be all that is needed.

The Rolla, KS homeowners’ guide to sump pump or interior foundation drains installations

From average costs to expert advice, get all the answers you need to get your job done.

See all articles