Get matched with top electrical wiring or panel upgrade pros in Sandia Park, NM

"Abran Gonzalez was a little late because he had to finish another job first. Once he got here he quickly got up on the step stool. He put the electric wires back into the attic, changed the lightbulbs and reattached the globe, all within one hour. If I need him again I WILL CALL HIM and not switch to another electrician I rated the job with 5 stars (he deserves the 5,l I would recommend him to anyone who needs electrical work done!!!!!"

"Julio and New Generation Electric llc was great. Julio updated my electrical panel from a 50 amp main breaker to 100 amp main breaker. Julio saved me from having to replace the whole panel which I was told was needed to upgrade to a HVAC system. He also referred me to a couple guys to possibly install a new HVAC system for less then what I was quoted for. I would definitely suggest Julio and New Generation Electric llc for your electrical needs."

"The work fully met and exceeded our expectations. It was done promptly, courteously, professionally, and with uncommon skill. Mario did a thorough job of bringing electrical wiring up to code, and a building inspector who evaluated the finished work had high praise for Mario's workmanship. "

"Circuit breaker in garage was intermittently tripping. Scheduled appointment and received confirmation email for 3 PM on Monday, 3/4/2019. Receive call at 9:26 AM that technician is at my door. They mistakenly set the appointment for 10 AM. No problem, I took leave from work to meet them. They conducted somewhat superficial inspection concluding that there may be an overload (15-amp circuit) and that one of the connected appliances was culprit. They measured amps being pulled by only one appliance (mini-fridge at 4 amps) and concluded it must be the cause. I permenantly unplugged fridge and they installed new circuit breaker. They also closed off an outlet on a different circuit that was connected to a light switch in a different room (previous homeowners feculent install). Charge was $96.55; they did not charge for the new circuit breaker. I head back to work. Return home around 4:30 PM and circuit breaker has tripped again. I call Clayton (service tech) at 4:46 PM and ask him to advise. We conclude that I should systematically diagnose each appliance on my own to see which could be causing overload. I do so and determine that no matter which single appliance is plugged in, the circuit breaker still trips intermittently. I call Albuquerque Plumbing at 10:59 AM on Wednesday, 3/6/19 to request either a refund or to have technician diagnose further. Customer representative states that if they send out a tech, they charge an hourly fee of $110 no matter what, even though original diagnosis was seemingly not thorough nor conclusive enough to perform the work that was done. I state I will have a different company perform diagnosis and representative responds that if another company alters work performed by Albuquerque Plumbing, it will void their warranty (which makes sense, but I’m not concerned about a warranty on work that didn’t resolve the problem). I have a gentleman named Joe Wojcik with Powerhouse Electric come to diagnose. He spent 2.5 hours diagnosing everything on the circuit very thoroughly and was very professional. At the time, we thought cause was a loose connection at GFCI outlet. Charge was only $75. Ultimately, this didn’t resolve the tripping breaker. After posting initial review of service, Albuquerque Plumbing called and asked if they could come back out to diagnose further at no additional cost. I agreed. They spent about 1.5 hours diagnosing the circuit and all connections thoroughly but were still unable to reach a confident conclusion. We parted company under the impression that one of my tenants must be plugging in a malfunctioning appliance on occasion that is shorting and tripping the breaker. About 15 minutes after they leave, the breaker tripped while I was standing in front of the panel. This was perfect because I was able to determine that no one was using any appliance on the circuit at that time. knowing this, I was able to unilaterally diagnose certain lines on the circuit by disconnecting them and waiting to see if breaker trips. I believe I have isolated the problem cable on the circuit and will have it replaced."

"Great company to work with. Prompt response and reasonable pricing. Would highly recommend them to anyone looking for an electrician"

1.) 5 years in solar and currently still going .\n2.)3 years in service and design still going.\n3.) 5 years trouble shooting.\n4.) certified in enphase solar and ensamble storage.\n5.) certified in solar edge .\n6.)certified in Tesla battery. \n7.)generator backup intermediate.\n

"Construction R us did a total rehaul of the electrical on our house and they did a stellar job. I found them to be communicative and honest. It's sometimes hard to find pros who do work and who you can trust to give you an honest assessment but this company definitely fits that bill. They also did a great job working around our schedule. Additionally they patched the dry wall after they were done and they did such a good job texture and colour matching we didn't even need to paint."

Mountain Ridge Electric (Jake's Electrical Solutions, LLC) upholds a standard of integrity bound by fairness, honesty and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers interests, and make their concerns the basis of our business.

"Daemen was an excellent electrician who made the installation experience very pleasant. He was on time and efficient. He did the job well past my expectations. He is very competent and a pleasure to work with. I would highly recommend Daemen at Albuquerque plumbing and heating for any electrical work you need done!"

"DataBoys has done multiple jobs with me over many years. They are always very professional and timely. I would recommend them for any electrical job."