Top-rated batt, rolled or reflective insulation install or upgrade pros.

Get matched with top batt, rolled or reflective insulation install or upgrade pros in Union Bridge, MD

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Batt, rolled or reflective insulation install or upgrade pros in Union Bridge

Avatar for Home Genius Exteriors
Home Genius Exteriors
4.9(
1,244
)
Batt, Rolled or Reflective Insulation - Install or Upgrade

Serving Union Bridge, MD and surrounding areas

Approved

Super Service Award Winner

In business since 2004

Free estimates

Emergency services offered

"Home Genius came by and installed my insulation into my attic and I couldn’t be more thrilled and happy with the results! I noticed an initial change with the first temperature drop of the winter! And I wasn’t cold one bit! Angel And Michael were both professional and knowledgeable and were available for any questions or concerns that I had! Thank you to Home Genius for my new roof and my new insulated attic! I would love to recommend them to all family and friends!"
WINDOWS
WINDOWS
WINDOWS
WINDOWS
SIDING

+73

Response time4 hrs
Response rate93%
2780 neighbors recently requested a quote
Avatar for ROI Construction LLC
ROI Construction LLC
4.1(
18
)
Batt, Rolled or Reflective Insulation - Install or Upgrade

Serving Union Bridge, MD and surrounding areas

Approved

In business since 1974

Free estimates

Warranties offered

"We had a great experience with ROI Construction sales representative David Burke. David was very knowledgeable about ROI's porducts and services. We look forward to getting our attic insulation project completed and will provide a more thorough review at that time. Thanks, Tim"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+19

55 neighbors recently requested a quote
Recommended by90%of homeowners
Accurate Insulation - Home Facebook
4.2(
152
)
Batt, Rolled or Reflective Insulation - Install or Upgrade

Serving Union Bridge, MD and surrounding areas

In business since 2005

Free estimates

Credit card accepted

"My house is a little wacky and the proposal was to include all of the crawl space and ceiling surface area. Sadly there was no way to know that a portion of both were inaccessible to insulate. Was hoping to fix issues with freezing pipes by insulating but that is the part they could not access. The scheduling and some staff on the phone is a little dry on the phone. The crew who came to do the job worked their butt off and were super nice. CJ, who drew our proposal, was very nice and knowledgeable. He warned me that his estimation might be a little off but the estimation of the Pepco energy saving percentage back ended up being way off after the energy audit. That made the job much more costly than predicted and I had not planned for that. He was willing to adjust the bill slightly but not significantly enough to really make a difference. Overall, it is going to make a huge difference in the comfort in the house and the crew was very professional."
Response time2 days
Recommended by97%of homeowners
Avatar for Atlas Home Energy Solutions LLC
Atlas Home Energy Solutions LLC
4.9(
106
)
Batt, Rolled or Reflective Insulation - Install or Upgrade

Serving Union Bridge, MD and surrounding areas

In business since 2009

Free estimates

Warranties offered

"This probably the most professional service organization I've worked with in any capacity. They did a comprehensive audit and we discussed issues that could be remediated prioritized by the biggest bang for the buck and then they did the fixes we agreed upon. I always felt like I was dealing with an expert who had my best interests at heart - work that they could have done that they advised could be deferred. Ended up increasing the insulation in the attic which I'd known for years was a problem and sealing the ducts which has made a noticeable difference. I'd happily recommend Atlas to anyone who thinks they might benefit from a home energy audit and efficiency upgrades."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+16

Response time3 days
Response rate100%
Recommended by97%of homeowners
American Home Contractors Inc
4.7(
2,134
)
Batt, Rolled or Reflective Insulation - Install or Upgrade

Serving Union Bridge, MD and surrounding areas

In business since 1986

Free estimates

Emergency services offered

"Thank you James Im, Antonio and crew for an amazing experience and a job well done! It is rare these days to find a home improvement company that you can trust from beginning to end. AHC staff and representatives ensured that every detail from estimates, to coordinating delivery of materials and quality control of installation was performed to the highest standards and exactly on time. James and Antonio/crew were attentive to our every question and concern, and in the end made the experience with AHC a memorable one worthy of the highest level recommendation. Bottom line: If you choose any other roof replacement contractor - you will be making a mistake!"
Tesla Solar Roof - Elkridge, MD
Tesla Solar Roof - Fulton, MD
Tesla Solar Roof - Ellicott City, MD
Tesla Solar Roof - Washington, DC
GAF Decotech – Westminster, MD

+509

Recommended by95%of homeowners
Cameron Home Insulation
4.6(
40
)
Batt, Rolled or Reflective Insulation - Install or Upgrade

Serving Union Bridge, MD and surrounding areas

In business since 1907

Free estimates

Credit card accepted

"They were prompt and courteous. The job took almost two full days. Of course it was expensive, like all closed cell insulation, but we got four estimates and this company offered to spray it in thicker than the other companies (in the ceiling for about the same price). The other companies told us that anything in excess of 2" is not worth the money in energy savings or basically is overkill  - and they charged a whole lot more to add the extra depth. AC&R sprayed in five or more inches of insulation in the ceiling rather than the three inches that the other companies offered. Now it is finished and right away you can tell it is super tight!  On a hot day the other day the place felt like an icebox! The insulation is not soft and mushy. It feelis a bit like one of those styrofoam coolers but a bit stronger and stiffer. One very minor thing is that they had left the staples in the studs where they had put up the plastic sheeting to protect areas not being sprayed, but I should be able to pull or pound them in before drywall goes on. They were careful not to produce a lot of overspray in areas not meant to be sprayed with plastic sheeting on the floor and elsewhere, plus they covered all the outlets before proceeding. Afterwards they did a good job of shaving down the excess flush to the studs and did a great job with clean up. If we were to do it again we'd use them. And we are fairly picky."
Recommended by100%of homeowners
Avatar for Handy Development llc
Handy Development llc
4.9(
9
)
Batt, Rolled or Reflective Insulation - Install or Upgrade

Serving Union Bridge, MD and surrounding areas

In business since 2019

Free estimates

Credit card accepted

"The team arrived slightly early to be well prepared to start the job on time. As they began they laid down protective barriers to keep the home clean. While in the attic they blew in the insulation with an even consistent barrier, ensuring that all locations with infrastructure were well covered. As they wrapped up the job, they cleaned behind them as they closed up the attic, removed the floor coverings and were on their way. The only way I can tell they were here is that the heat runs less in the winter and the air conditioning runs less in the summer. I would recommend this process and this team to anyone who owns a home and has not insulated their attic."
Fairfax va Install
Martinsburg wv ( Attic barrier
Martinsburg solar fan installed
Winchester Va radiant install
Salem Virginia install

+45

Recommended by100%of homeowners
Avatar for Mark Group
Mark Group
4.4(
467
)
Batt, Rolled or Reflective Insulation - Install or Upgrade

Serving Union Bridge, MD and surrounding areas

In business since 1974

Free estimates

Credit card accepted

"We contacted the Mark Group for a Home Energy Assessment because of coldness in our first floor living area and basement. Gordon performed the assessment and provided recommendations and an estimate to energy seal our basement with spray foam insulation. He assured us that having the work done would substantially decrease air loss, and as a result, the temperature of our first floor and basement would become so warm, we would be wearing short sleeves instead of sweatshirts. Gordon offered us a financial incentive to provide a deposit the day of estimate, something we rarely do. He also pointed out that the crew were professionals, and the insulation would not be sloppily applied, as was the case with a previous attempt by my husband around the circuit box. Gordon added that his crew would conduct a health/safety inspection of our existing CO detectors and install a new CO detector, if needed.   
Subsequently we had the work done by 2 men who arrived promptly on the scheduled day. They took care to protect our carpet and furniture from debris, and removed and disposed of the old insulation before applying the spray foam. They did not provide any feedback on the status of our existing CO detectors but left a new one at the end of the day. Before leaving, they requested an immediate evaluation for Angie's List.  Upon a brief inspection, everything appeared to be satisfactory to my husband, and he complied by completing the form and giving all A grades.  At the time, the front door had been open for 2-3 hours; as this was necessary for proper performance of a blower door test, the house was understandably cold immediately following. 
However, the next day my husband and I both noticed no difference in the temperature of the basement or first floor. Upon closer inspection, my husband observed gaps in the insulation where air flow was still evident. In our opinion, if the old dirt and debris had been vacuumed after removal of the old insulation, the spray would have adhered better, but they did not make the extra effort to do this. In addition, we saw an overall lack of uniformity in the application of the insulation. In some areas the foam was evenly applied, but more often than not, there were several areas where the foam did not completely fill the space or overflowed on to the cinder-block wall.  He promptly contacted the Mark Group and Gordon informed him that someone would contact us to schedule a return visit.  I subsequently emailed Gordon photos of the insulation and requested another thermal camera analysis. Additionally, after further inspection when moving items back into place, there was significant debris on the floor, as well as other areas of the basement that took several hours to clean up.
Approximately 5 days later, Pat came out to inspect the work done and brought the thermal camera. He performed the thermal analysis in the basement and filled in the gaps mentioned,  but explained it was difficult to evenly apply the insulation given the nature of the product and application. Also, he pointed out that due to the structure of our home, it was impossible to substantially improve the temperature in the basement and first floor without having significant structural renovations. While we appreciated Pat's honesty, we felt like Gordon made empty promises and overestimated the benefits of the air sealing.  
This was one of the few times, my husband and I agreed to have work done at the time of estimate, mainly because of the majority of highly favorable reviews,  persuasive statements regarding comfort level, and financial incentive.  Looking back, however, after re-reading ?F? review, I can relate to the homeowner's frustration and regret making the decision without further questioning. 
 


"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+14

Recommended by83%of homeowners
Showing 1-10 of 46
FAQs for batt, rolled or reflective insulation install or upgrade projects in Union Bridge, MD

Batt insulation excels in vertical installations because it remains firmly in place and delivers consistent thermal performance. Blown-in insulation performs exceptionally in spaces such as attics, efficiently filling gaps in irregular areas. 

Employing both insulation types according to their strengths enhances your home’s overall energy efficiency and comfort by providing a tailored solution for every space.

Start by measuring the square footage of the space, then match that area with the insulation thickness you need to hit your target R-value. Add a buffer for waste and odd-shaped spots so every cavity is covered. 

Once you have a rough count, run it past a local insulation pro—their on-site advice will fine-tune the numbers and help you avoid costly miscalculations.

Old insulation that is dry, intact, and mold-free does not require removal before adding new insulation; stacking new insulation over it maintains effective thermal performance and boosts energy efficiency. 

If the insulation is damp, moldy, or deteriorated, removal is necessary to eliminate health risks and ensure maximum effectiveness of the new layer. A professional insulation contractor will assess your situation and recommend the most effective solution.

Installing insulation in an average-sized home using batts or boards requires five to 12 hours. Using spray foam or blown-in insulation requires two to five hours. These timeframes are determined by the area’s size, accessibility, and whether old insulation must be removed. 

Complex projects and hard-to-reach spaces demand extra time. Hiring an experienced insulation professional ensures that the installation is completed efficiently and correctly.

Insulation is measured by R-value, which defines how effectively it resists heat flow. A higher R-value provides superior thermal resistance, ensuring your home remains warm in winter and cool in summer. 

Choosing the correct R-value is essential for maximizing energy efficiency and comfort, and it directly impacts long-term utility savings. Professional guidance determines the optimal R-value for your specific climate.

The Union Bridge, MD homeowners’ guide to batt, rolled or reflective insulation installs or upgrades

From average costs to expert advice, get all the answers you need to get your job done.