Get matched with top carpenters in Garfield, MN

"We originally contacted Hal in the spring of 2012.  Our intentions at the time were to build a new deck using composite decking and metal railings.  After meeting with Hal, we scrapped our plans completely.  
Hal discussed the pros and cons of composite materials, and compared them to a natural wood product (in this case...pressure treated southern yellow pine).  Further, he recommended we consider a pergola.  Ultimately, we ended up putting our plans on hold for 2012 based entirely on Hal's recommendations.
Fast forward to the spring of 2013.  We again contacted Hal and let him know we were ready to move forward with our project.  He came out to our home to measure everything and prepare a quote for us.  One quick note of caution here:  Hal is a true craftsman and manages his business well.  That said, I would not expect "ballpark" quotes, itemized invoices, etc.  If you're going to work with him, you'll need to be prepared to work on Hal's schedule.  This includes when he'll have a quote prepared for you, and when he'll be able to start the work.  Rest assured however, he will vastly exceed your expectations if you're willing to be patient with the process.
Hal began the work in mid-May.  Despite the challenging weather, the project was completed on time and, frankly, blew us away.  His work is extraordinary, and displays the true skill of a master carpenter.  His crew was polite, friendly, clean, and hard working.  It was  also abundantly evident that he cares about his team and is willing to take the time to teach them his craft.  
On balance, we simply could not be happier.  The deck, the pergola, the trellises, and fence are all beautiful.  Our friends and neighbors can't say enough about Hal's work.  I can say with certainty...we'll be enjoying Hal's craftsmanship for years to come!
Thank you for a job very well done.
"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

tree removal , tree works , specialize in high risk climbing, do tree trimming, tree shaping, tree topping, all shrubs, bushes, hedges trimming. Stump removal and grinding. Tree planting, nursery stock- \nAll modes of landscaping, retaining walls, stone, timber and rock walls- rock and mulch beds- dry river beds- drainage systems, water run-off - will do some decks, fencing- just ask we probably do- any questions just ask Jesse he does it all.

Forrest W. Potvin Construction, LLC is a locally owned and operated company that values honesty and integrity in all aspects of our business. Our dedicated team of professionals have over 25 years of hands on experience, to provide innovative ideas and suggestions tailored to your projects. Our services are customized to your individual needs, paying close attention to the details of each project that we are involved with. Please feel free to contact us today!

PIK Construction, LLC proudly serves our customers with pride, integrity and attention to the details that matter most to you. This is one of the many things that set us apart from the rest. We are locally owned and operated. Give us a call today. We are already booked for the 2019 Spring/Summer for post frame shed/barns \n \n \n

"All we did was call them and they came out right away and fixed our bathroom problem. They companies workers were very polite and friendly. They go a great job and save me a lot of money every year. I love this company and only have great words about it! Most recently we have used the company for a pluming leak that we had in the bathroom. But you can pay a deductible for appliances carpenters pools spas etc. Whatever your home need is."

Sentri Homes is a full-service contractor delivering high-end home additions, whole-home remodels, new custom builds, luxury kitchens, structural framing, roof replacements, and every major renovation. We assign a dedicated project manager to every job, deliver meticulous craftsmanship with clear communication, and back our work with an industry-leading warranty to ensure complete peace of mind on your largest investments. Our in-house team of licensed builders and master craftsmen consistently earns 5-star reviews by turning big visions into stunning, high-value homes—when you need one trusted partner who truly does it all, we’re the proven choice.

Serving all of Otter Tail County and beyond, the professionals at Rough Cut Renovations, LLC are the go-to, full service contractors you can trust to get the job done right! Call now for a consultation!

Affordable Custom Homes\nCustom Drafting & Design Services

We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.