Get matched with top sewer main install, replace or repairers in your area

"It was a custom job, a big shower, but the sales guys reassured me that I would get a finished product and all I would have to do was paint the ceiling. He said it would be about 3 days, but the job took 7 days and ran into my son's 7th birthday party. The first mistake we noticed was that the walls were not level and the grout lines were off. We called the installer and they rushed back and pulled the wall down. The seal between the two walls never fit quite the same after that. Then we noticed on the back wall behind the bench that it was bolted to the green board and not wooden framework, and the greenboard had already begun cracking from sitting on it a few times just to test it. So they came back and hammered a 2x6 in there and acted like it was no big deal. The concrete poured under the base of the tub didn't meet the outside edge or the corners and instead shims were left in place that came loose, causing the tub to dip and the caulk to crack. So I hammered in my own shim and poured the concrete myself, repairing the caulk afterward. Water is still pooling in the far right corner of the pan but there's nothing I can do about that. The hole cut in the ceiling for the can light was off center so I had to widen it to get the light in there. Because of this, it was too wide to make a proper seal and I had to caulk around the outside edge of the light. Neither of the shower heads had a washer in them and both were leaking. The hot and cold are backwards. The ceiling was not caulked, nor the trim along the windows, not the trim around the outside edge of the shower where it meets the drywall. This was done after I spent a couple days building the drywall up on both sides, four layers of mudd and sanding to properly level and prepare it. In all I probably spent five or six days on the shower installation that I was told would be done in three days, and all I would have to do was paint the ceiling. Instead I'm pouring concrete, caulking, mudding, painting and texturing, cutting baseboards and I'm slow at it because I'm a nurse and not a carpenter. That's why I wanted to hire professionals. And I told them they owed me some money back, a figure that was around 40% and the manager told me he would call me on Monday and that was over two Mondays ago. The project took a long time to get started, it took a long time to get finished, it was not done right, it was not done professionally, and it was not the finished product I was promised."

"This was amazing! I had no idea this service existed. After searching and contacting various repair places for my washer, this was the most cost effective option. I figured if it didn't work, my machine is old and I would be out $40, not the $100+ to have a tech come out and just diagnose the problem. I am pretty handy and my washer is old anyway, so if it is broken, I have to get a new one anyway. My tech, Steve, was great! He predicted what was wrong after listening to the machine, calmly walked me through dismantling the machine and when we got down to the motor, he was right! He sent me a link to the part I would need, and let me know to contact them again if I needed help installing it. My machine works even better than before it broke, its beautifully quiet and efficient. I will definitely be saving this company for any future repairs on appliances I may need. The service was $40 + the part cost, which was about $8."

"I contacted Cabinets.com because of a friend's recommendation. I am totally remodeling my kitchen top to bottom and had no idea how to go about creating a design or much else.. From the first phone call, I was treated with kindness, patience, and respect. I was assigned designer Greg Flassig. I was nervous about all the questions I had and whether he'd be willing to walk me though the process for as long as it took. Not only was he willing, but Greg calmly and patiently answered every single question. He spent as much time with me as I needed, explaining what I didn't understand, adjusting what I needed, and suggesting. what was optimal for. my needs. He even brainstormed solutions with me when I was unhappy with any aspect of the design. Not only did Greg professionally and compassionately help me, but he had a way of reducing my anxiety when it reared up. Greg was respectful of my budget and my needs, and truly heard what I said. He answered every single question I had, and when I didn't know what to ask, he knew what to say. I can't wait to get my cabinets and create my dream kitchen. After working with Greg, I have absolute confidence it will be perfect!"