Top-rated interior trim and decorative moldings installers.

Get matched with top interior trim and decorative moldings installers in Dundalk, MD

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Interior trim and decorative moldings installers in Dundalk

Avatar for E&V remodeling innovation
E&V remodeling innovation
5.0(
17
)

Serving Dundalk, MD and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Emergency services offered

"We were very happy with the work Edwin and his team did. They framed out our unfinished basement, unfinished drywall and painted. They put in extra time and care to make sure everything was done properly. We will definitely hire him and his team for future projects."
Framing Project
✨
Framing Project
Deck
Deck

+3

Recommended by29%of homeowners
Almack Construction, Corporation
5.0(
1
)

Serving Dundalk, MD and surrounding areas

Approved

In business since 2013

Free estimates

Offers commercial services

Almack Construction Corporation is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers interests and make their concerns the basis of our business. Please give us a call today!

Response time1 day
Recommended by100%of homeowners
Avatar for Rodriguez Home Improvement LLC
Rodriguez Home Improvement LLC
4.4(
193
)

Serving Dundalk, MD and surrounding areas

In business since 2016

Free estimates

Credit card accepted

"The price was fair for the job done which is important however the overall job was mediocre at best. My kitchen is challenging with an 18' cathedral ceiling. I anticipated the highest parts of where the wall meets the ceiling the paint lines might not be perfectly straight. Even managing my expectations... not a single paint line is straight, they are all wavy, at the baseboard, around the door, where the ceiling height is only 8' - not a straight paint line to be found in my kitchen. Jose was very nice, cleaned up when the job was done and seemed to work hard. For those reasons I would have liked to give a better rating but when I look at the details, the job is just barely adequate."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+20

Recommended by83%of homeowners
Avatar for AMS Home Remodeling LLC
AMS Home Remodeling LLC
4.7(
25
)

Serving Dundalk, MD and surrounding areas

In business since 2005

Free estimates

Emergency services offered

"As reflected in the ratings above, in general, we were very pleased with the work by AMS.

In particular, their interior painting and bathroom renovation work were superb.  Other components of the renovation were good as well.

The owner, Frank, was cordial and professional.  As an example, he was well versed in working with the stairway and made good suggestions, while respecting our thoughts.  He even worked with a new subcontractor for the stairway railing and glass that seemed to have the better proposal than the one he usually uses.

The AMS crew members who worked on the basement, stairway, painting and bathroom were courteous and responsive to changes and suggestions.  They also "cleaned up" their work area each day.  They seemed to be a happy bunch, and at times we could hear one of them singing (pretty well :-) while working in the basement.

I suppose the best measure of a renovation company would be whether we would request their services again.  The answer would be a resounding "Yes"!"
Stairs & Rails
Basement/Bath remodel
Hardwood Flooring
Getting started
And before you know it!

+14

Recommended by91%of homeowners
Avatar for Bath Doctor LLC
Bath Doctor LLC
5.0(
23
)

Serving Dundalk, MD and surrounding areas

In business since 2000

Free estimates

Credit card accepted

"This is the third bathroom they have done for us,replaced shower,toilet sink, acrylic walls,installed new floors. Total redo. We have been more than pleased from the start,beginning with the initial assessment. This is a family owned business who take pride in their work. You would not know they were in your house,work quietly and cleanly. And the outcome is outstanding. I highly recommend Bath Doctor. You will not be disappointed.


"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+20

Recommended by100%of homeowners
Avatar for Ruxton Design & Build LLC
Ruxton Design & Build LLC
4.3(
262
)

Serving Dundalk, MD and surrounding areas

In business since 1999

Free estimates

Credit card accepted

"Price – The original estimate was reasonable, BUT – the contract called for progress payments that provide Ruxton with close to 90% of project cost when less than 30% of the project is complete; Angie’s list advertised $800 discount was immediately eliminated by contract wording; close reading of contract showed that home owner will pay for any overages on selection allowances, but will not receive credit for those selections that come in under the allowance; we discovered that items shown on Ruxton drawings but not included in the contract will be at owners cost plus all appliances are at owners cost; we had requested that barn doors be included in our project. We were told they were expensive to obtain and agreed to pay $2400 apiece for them. Later we discovered they were procured from Home Depot for $499 apiece and installed in about 4 hours plus several hours for staining. Our contract specified the installation and ducting for a gas fireplace with a $2800 fireplace allowance. We selected one of the lower cost gas fireplaces for $3200 and agreed to pay the additional $400. When the job was already 45 days late we were informed that we would also be responsible to pay for the ducting cost, $1000, and fireplace installation cost, $1500. After several discussions, Ruxton agreed to cover half of the $1500 installation cost. Quality – The design and completed work has been good, BUT – rework was a constant frustration; ceiling above bar area was installed too high and had to be lowered; proposed glass shelf area was built only 3 inches deep and was eliminated by owner to reduce rework; two other shelf areas by barn doors were built too high and had to be modified; three solid wood doors were ruined during the staining process and had to be replaced; part of engineered hardwood floor was loose and had to be removed and reinstalled; two other areas of the hardwood were gouged during appliance installation and had to be pulled up and repaired; custom book shelves were ordered 12 inches deep instead of contract specified 18 inches deep and had to be modified on site; the electrician installed the wrong switches which had to be replaced; electrical wiring was not installed correctly resulting in finished wallboard having to be removed and replaced; and a twenty amp electrical line for a planned microwave was pulled but blocked by shelf installation and is not available. The bathroom shower tile was installed leaving out the trim tile. The owners removed the tile before the glue set up. We gradually lost confidence in Ruxton’s ability to work without oversight and towards the end of the job canceled a vacation to be home monitoring the work. Despite the difficult construction process, we are generally pleased with the appearance of our new family room and bath. Responsiveness – Most of the above quality issues have been corrected by Ruxton. After many complaints by the homeowner, Ruxton made some efforts to improve the rate of progress on the job. Unfortunately their efforts were too little and too late to make any real schedule improvement. Punctuality - The contract specified that the project would be completed in two months. The project has extended to over four months, more than twice the estimated duration. In addition to the issues describe elsewhere which caused delays, the project was prolonged because it was only staffed an average of two and one half days a week. We were informed that Ruxton was unable to staff the project full time due to sickness and medical issues of their contractors, contractor doctor and dental appointments, higher priority projects, contractor truck problems, and contractor personal issues. Several times subcontractors were scheduled to meet with the Ruxton foreman at the jobsite at 8am. However, the Ruxton foreman was usually not punctual forcing the homeowner to describe the work to the subcontractor. Professionalism – Frank Zeberlein’s architectural design for our project was good. Communication with Frank Zeberlein to resolve the many issues that arose during the project was very difficult. The three main Ruxton contractors that performed most of the work on our project treated us and our home with respect; however they all quit three weeks before job completion, and had to be replaced by Ruxton. Project management, coordination, and communication during construction were dismal. Frank rarely came to the site to check on progress even though his office is only 5 minutes away. The Ruxton design coordinator never visited our home. We made all of selections within the first two weeks of the contract, but many items were ordered late or not ordered by Ruxton. This resulted in delays waiting for cabinets, granite, tile, bathroom lights, and gas fireplace. The job foreman was constantly being distracted by other jobs and seemed to be unable to plan more than a day or two ahead. Materials for the job were picked up on an almost daily basis, instead of planning ahead and improving efficiency by purchasing supplies needed for the next few weeks. Scheduling of subcontractors was often untimely. Communication with us was poor throughout the project. We were routinely given milestone completion dates that were missed. Several times we were told what work would be done the next few days only to have the workers pulled off the job for several days to work elsewhere."
Additional Photos
Kitchen
Bathroom
Fletcher bath
Fletcher bath 2

+42

Recommended by78%of homeowners
...
Showing 1-10 of 127
FAQs for interior trim and decorative moldings installation projects in Dundalk, MD

Installing crown molding can be challenging, depending on the material and your skill level. Lightweight materials like polystyrene and softwoods are easier for homeowners to install themselves, offering a cost-saving option. However, heavier materials like hardwoods and plaster are difficult to work with and require professional installation to achieve a high-quality result. Precision is crucial in measuring, cutting, and fitting crown molding, so hiring a professional ensures the best outcome.

Crown molding is available at various price points, ranging from $1 to $30 per linear foot, depending on the material. This wide range offers options for every budget. Affordable materials like MDF, PVC, and polystyrene provide cost-effective solutions, while premium materials like exotic hardwoods or metal offer a luxurious appearance at a higher cost. Regardless of your budget, you can find crown molding that enhances your home's aesthetic.

Crown molding is installed by professional finish carpenters or painters who specialize in detailed trim work. These experts possess the necessary skills and tools to ensure precise measurements, accurate cuts, and seamless installation. By hiring a professional, you can achieve a flawless finish that enhances your home's aesthetic appeal without the risk of common DIY mistakes.

Crown molding can be installed in various areas of your house to add elegance and architectural interest. It is commonly used where walls meet the ceiling, but you can also place crown molding around doors, windows, mirrors, and atop cabinets. Installing crown molding in these locations enhances visual appeal, creates a cohesive design, and adds a touch of sophistication to your home's interior.

To determine how much crown molding to purchase, start by measuring the length of each wall where you plan to install crown molding and add the measurements together to determine the total linear feet required. Purchase an extra 10% of material to account for waste from cutting angles and to ensure seamless joints by using full-length pieces when possible. Including additional material helps avoid shortages and ensures a smooth installation process.

For a professional crown molding installer, this task takes about 1 to 3 hours per room, depending on size and complexity. Factors like the material, design intricacy, and number of corners can affect the time. If you're doing it yourself, expect it to take longer as you get the hang of measuring and cutting precise angles. Advanced measuring and planning or hiring a pro can help the project go smoothly.

The Dundalk, MD homeowners’ guide to interior trim and decorative moldings installations

From average costs to expert advice, get all the answers you need to get your job done.