Get matched with top whirlpool bathtub installers and replacers in your area

"Whitney and T took over the whole interior design process on our new construction beach house. From paint and tile selection, furniture, floor and wall coverings to every knickknack on every table top. It is both unique and everything we could have hoped for. It has made our dream home a reality. We absolutely love the results."

"Painting looks great."

"It went amazing the service was perfect could not ask for better service. The work is amazing ,could not have done a better job , i am so happy with the way everything came out. I will definitely be recommending to my friends and family."

"I first submitted my information to this company through their website. I received no response to that. I then called them twice to give my information. Each time I called, they told me I would hear from somebody in two to three days. I didn't receive a reply until I left a negative review. By the time I heard from someone named Ed, I already had another company out to inspect the damage in my home. I told Ed I'd get back to him if it didn't work out with that company. That company didn't get back to me for me to pay them and provide the estimates. I decided to try submitting my information for a project on Yelp. I received interest from one company. That company didn't call when they said they would, so it seemed like it was going to fall through with them. I called back Ed to set up a day and time to come out to visit. I ended up hearing from the company that I found after submitting my project to Yelp, and it seemed like they were going to come through with the estimates I needed. I called Ed back to cancel our appointment because I didn't want him wasting his time coming if this other company was going to provide the estimates. This other company wasn't calling when they said they would, getting back to me days later when I wasn't sure if I was ever going to hear from them again. I decided to call Ed to reschedule another appointment. This time he told me his boss didn't want to be involved with providing estimates if they're going to be used in a lawsuit. He referred me to another company, which didn't respond. After getting the runaround from two other companies, Ed and AW Martin got rid of me by referring me to a company that also didn't want to get involved. If a company has a problem with their estimates being used in a lawsuit, that sends up a red flag for me. It's frustrating, but I'm quickly learning how to deal with contractors. Don't tell them what you intend to use their estimates for. Fortunately, I've found a fifth company that I believe is going to provide the estimates I need. I was honest with them and told them why I needed the estimates, and they're even willing to appear in court to back up those estimates for a fee. In that case, I'm sure I can trust them, and their estimates will help me greatly with my lawsuit."

"All-Star Contractors was a pleasure to work with on my garage project. Bill scheduled an assessment and was right on time, during which he provided a competitive estimate for the whole project. The garage included electric, cement, roofing, and custom shelves, all of which Bill and his team were able to provide. His team showed up on time every morning and got the work done on the agreed-upon timeline. Bill was easy to work with an accommodated several special requests and his team did a fantastic job on the project. I would hire him again for any construction or home improvement needs!"

"HORRIBLE!! Reached out to them for 4 days straight through Angi - no reply. DO NOT RECOMMEND!!"

"They did fine"

"This past weekend I had a bad experience. The short story is that an A. J. Perri technician diagnosed my furnace problem and wrote me an estimate for $1,600, parts and labor. It turns out my furnace had a different problem that required no parts and only 15 minutes of labor. Here are the details: This past Saturday my furnace stopped heating my home. I called A.J. Perri and they sent out a technician on Sunday morning. The tech ran some checks and concluded that my “inducer assembly” had to be replaced. Parts and installation would be $1,600. He said someone from the office would contact me on Monday and let me know when they could have the part. He also said that he couldn't be certain that there weren't other issues that wouldn't be found until the inducer was repaired. After the technician left I did some searching on the Internet. YouTube and Reddit were especially helpful. I discovered that the problem was that the condensate drain was clogged and water had backed up into the inducer assembly. The water prevented the pressure switches from detecting that the inducer was running and this prevented the furnace from starting. When I disconnected the condensate hose *2 quarts* of water drained out of the inducer assembly! This water was supposed to drain into a small pump unit on the floor that sends collected water to the sump. Over the years mold and algae had clogged the condensate trap and caused the backup. I disconnected all the hoses and removed the trap. I blew out the trap (making a mess) and confirmed that water would easily flow through it. I put it all back together and the furnace is working fine. The sad lesson here is that you can’t always rely on supposed experts. The good news is that the Internet can be your friend. Even more details: The original symptom was that the furnace would start up, the inducer motor would run for about 20 seconds and then it would shut off. This cycle would repeat every few minutes. Every few hours the furnace completed the startup cycle and then I’d get heat. Then it would stop heating for hours, and the indoor temperature would drop to the low 60s. What I learned from YouTube is that there are multiple stages for furnace startup. The inducer motor spins a cage that sucks in fresh air for combustion, and then pushes the hot gases through the heat exchanger and out the flue. Each stage in the startup has safety checks. The furnace will not ignite if the pressure sensors don’t detect that the inducer motor is working properly. Water is a byproduct of the combustion. It starts as a vapor but then condenses in the flue pipe and drains back to the inducer assembly, where it’s supposed to run through a hose to a pump that sends it over to my basement sump. The furnace is 14 years old. Apparently that’s long enough for mold and algae to clog the condensate trap and cause water to back up into the inducer. The 2 qts of water blocked the pressure sensor switches and so the furnace wouldn’t light. Final thoughts: For over 14 years I've had great experiences with A.J. Perri. They replaced my home’s original furnace and Air Conditioner units. They moved our outside A/C unit to the side of our house so we could have more quiet in the backyard. I had them come for periodic heating and A/C maintenance checkups. My impression is that they might cost a bit more, but they were reliable. I'm saddened that I need to post such a negative review."

"Michelle setup my appointment. She was polite and professional. She also asked the correct questions to understand the clog I was dealing with in the main line going out of the house. Fabian arrived onsite at the appointed time and day. Fabian surveyed all my plumbing line before starting the job. He took care of my clog in record time and charged a fair price. What pleased me the most was everything they said they would do they did. I will be recommending All Clear for any plumbing issues. Thank you All Clear. Terry Smith"