Get matched with top doors (interior) installers and replacers in Gloucester, VA

"Bob and his team did a great job helping me with some plumbing repairs at my house. I had old fixtures and they were able to replace all of the shower and sink fixtures in both bathrooms. Very reasonable and responsive. Will happily use them again for future work."

OCM Services, LLC is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

"I am extremely happy with AJ's service, start to finish. We initially reached out for an estimate at the beginning of 2015. A representative came to our house to explain all the different products as well as pricing and timing. I had reached out to 2 other companies before hand but was not comfortable their high pressure selling. AJ was very patient with us regarding our timing and budget. I received an estimate on the spot and was able to take my time to review and get back to them. We scheduled the work for May and was able to have 7 Windows removed and replaced in only a few hours. We are very impressed with the quick respond time, professionalism and quality of work including cleanup. We plan on using AJ to replace the remaining Windows as well as a sliding glass door in early 2016.
"

"Kenny was great to work with - he is punctual, responsive and followed through on all promised and did quality work!  His quote was lower than all others I received but the quality of the work is fantastic.  The steps and railing in front of my townhouse were loose and the landing a bit concave.  Kenny made sure that the landing is now flat, the bricks are reattached and the railing is sturdy and secure.  I would definitely recommend his services to other home owners!
"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"Installation of our new windows was done efficiently and professionally from Patriot! They arrived on time and did an amazing job! We definitely recommend them!"

"Made an appt. with Castle Rep, James, for 17 windows and vinyl siding. He spent 1 hour talking about how great his company and windows are before finally getting down to the issue. We were told that CASTLE makes and services their own window, with all the best technology and technicians available. The price per window for energy efficient came out to over $1,200 per double-hung window! And since they make their own products, we could not find a way to compare quality and price with other manufacturers. But his per-window price exceeds the average price of $500-700 by A LOT! When we balked, he made a call to his "manager" to see if we qualified for a "special promotional" discount. If we were to commit right there on the spot, we would get an additional 10% off! Still way to high. We said we would think about it (he got sad and snippy), and that we wanted to hear about the vinyl siding quote before we made any decisions. He told us he could not give us a siding quote until his company did an "eagle view" measurement, which would require another appointment! We had no intention of sitting through ANOTHER high-pressure appointment. High pressure, long-drawn out presentation and he would not leave us with anything in writing! No brochures, prices, nothing! He refused to put anything in writing and we could not have a break down of labor and costs. I even asked him if I could have a copyhh of the window warranty and he said "only if you purchase right now." And they did not come prepared with references or previous job locations! When we further researched the company, we found they did make very excellent products, but the #1 complaint was by far that they did not honor their lifetime warranty and that customer service was horrible. In the end, we chose not to do business.."

"Ben and his father were always on time, incredibly efficient, always cleaned up after themselves and did an overall great job.  I wouldn't hesitate to use them again or recommend them to others.
"

"Everything went well. Needed help as, while the install isn't exactly complex, I don't have all the necessary tools/accessories to install in tall garage ceiling. Rep came out to survey area for installation and determine any details, as well as provide rough estimate. Crew came out few days later and installed rack without any issue. Will be contacting for a repeat of same with another storage rack."

"We contracted with Castle for window replacement in January. The windows were replaced within 2 months of signing the contract. The installations went smoothly and the windows made a huge improvement to our home. Problems did arise when they were unloading the windows from the truck. We had requested contoured grilles but the windows arrived with flat grilles. We opted for a discount rather than return the windows. The second issue was that we had requested full screens for the front of the house. Castle sent someone out measure after installation, not using the original measurements. This was 2 months after the fact. Then we received a call from the factory, that the order had been placed without the measurements. We had to supply them. 3 months later, we have still not received the full screens. We had an appointment for their install that Castle cancelled due to a technician calling out. Rescheduling was set for another month out. It will be a generous 4 months from the original installation to get the screens that we ordered. Pretty disappointed. For such a minor fix, it has taken too long to correct."