Top-rated interior trim and decorative moldings installers.

Get matched with top interior trim and decorative moldings installers in North Plains, OR

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Interior trim and decorative moldings installers in North Plains

Avatar for D & N Colors Painting, LLC
D & N Colors Painting, LLC
5.0(
22
)
Interior Trim and Decorative Moldings - Install

Serving North Plains, OR and surrounding areas

Approved

In business since 2016

Free estimates

Warranties offered

"Chebo is amazing the attention to detail and making sure everything was done right is clear when you are working with him. He went above and beyond on my job making sure everything was painted including the foundation and gas meter! He also did some repairs to some trim and a small section of siding in the prep work that look great. I bought new handsets and locks for all the doors and he even installed them after painting the doors. What is even more special about his company being a local family owned business is when he needed help from a crew on the big days it was his brothers that joined the project. Amazing work the house looks completely new. I am absolutely recommending his services to my friends, coworkers, and neighbors!!!!!"
Response time3 hrs
Response rate85%
4 neighbors recently requested a quote
Avatar for Willow Maze Construction
Willow Maze Construction
5.0(
17
)
Interior Trim and Decorative Moldings - Install

Serving North Plains, OR and surrounding areas

Approved

In business since 2018

Free estimates

Credit card accepted

"Grady did an awesome job! I've dealt with many shady contractors and Grady is nothing like them. He's honest, dependable, fair, and will be upfront with you. I never once felt like he was just trying to "get one over on me" because I'm not knowledgeable about these things. He is clear about telling you the why behind the cost of materials and labor. And he gets it done right the first time. In a world full of shady contractors, he's a breath of fresh air. And he's once of the nicest people you'll ever meet!"
Fencing
Fencing
Recommended by70%of homeowners
Avatar for DAD construction
DAD construction
New to Angi
Interior Trim and Decorative Moldings - Install

Serving North Plains, OR and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

At DAD construction we handle all type of residential remodels, small commercial remodels, all sorts of handyman services. I’m Alex, owner or DAD construction. I have years of experience as a professional tile installer, finish carpenter and small house repairs. I’m also a full time licensed journeyman electrician. Attention to detail and quality work is my priority and I stick to it.\nSo reach out with any questions and see if I can help you with your projects. \n

7 neighbors recently requested a quote
Avatar for Flooring Pro Inc.
Flooring Pro Inc.
4.8(
126
)
Interior Trim and Decorative Moldings - Install

Serving North Plains, OR and surrounding areas

In business since 2006

Credit card accepted

"Eugene and his team were very professional and did a great job with my kitchen floor. During the demo part, they ran into some unplanned issues with the flooring, and then later with the tile itself but they always made it work or suggested the best options to move forward. The job was completed on time and the finished floors looks great."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+45

Recommended by95%of homeowners
Avatar for A Better Carpenter LLC
A Better Carpenter LLC
5.0(
24
)
Interior Trim and Decorative Moldings - Install

Serving North Plains, OR and surrounding areas

In business since 2015

Free estimates

Credit card accepted

"Matt and Dan were fantastic and went above and beyond throughout the course of the project. They were knowledgeable, professional, and focused on the details consistently. Even when issues popped up they were quick to find solutions and implement them. Highly recommend working with them for any renovation, we will definitely be using them in the future for any projects we have."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+4

Response time1 day
Response rate100%
Recommended by100%of homeowners
Avatar for C McNearney LLC
C McNearney LLC
4.9(
146
)
Interior Trim and Decorative Moldings - Install

Serving North Plains, OR and surrounding areas

In business since 2002

Free estimates

Credit card accepted

"Given the fact we have no eye for design nor any reliable contractor recommendations from friends, we consider ourselves very lucky to have found Charles! Going into a major home remodel relatively blindly was a little scary, but we are extremely happy with our finished product and how thorough Charles' work was. He has an eye for detail and takes a lot of pride in both his work and the design aspects. (Essentially, we told him the color palate we liked and allowed him to steer the vision - the results are GORGEOUS! Several friends have told us the improvements are magazine worthy). Charles was always punctual, always efficient, and worked diligently to stay in our budget. We're so pleased with his work, we're planning on having him return next year to work on other areas of the house. Would recommend Charles wholeheartedly to anyone!"
Additional Photos
Additional Photos
Additional Photos
Recommended by99%of homeowners
Berger's Table Pad Factory
4.8(
1,345
)
Interior Trim and Decorative Moldings - Install

Serving North Plains, OR and surrounding areas

In business since 1983

Free estimates

Credit card accepted

"Within days of purchasing the deal, I received the instructions and paper to draw my table templates. The table has 2 drop leaves plus 2 additional leaves that can be inserted in the table. The templates were pretty easy to draw. The finished pads were delivered in a very short time. They fit the table and each of the 4 leaves perfectly and magnetically lock together to keep them aligned when on the table. A year and a half later, I still love these pads."
Recommended by93%of homeowners
Avatar for Classic Pro Contractors Inc.
Classic Pro Contractors Inc.
4.7(
49
)
Interior Trim and Decorative Moldings - Install

Serving North Plains, OR and surrounding areas

In business since 1985

"Dave came out and estimated the work within a couple days of calling. He was very knowledgeable and offered suggestions on what he felt was the best solution for my very worn, weathered decks. I appreciated the fact that Dave was on time and finished the work within a few days as promised. I was impressed at how much pride he takes in his work and that fact that he does not take any shortcuts. In fact, he included additional work that he felt was needed at no extra cost. I am very pleased with the work he did and and the amount paid for the work. The total cost included about $200-$250 for a specific brand of stain I requested, which was a little spendy (but very good quality). Overall, Dave did an excellent job and I would highly recommend him."
Additional Photos
Additional Photos
Recommended by97%of homeowners
Avatar for The Renovation Company
The Renovation Company
4.5(
73
)
Interior Trim and Decorative Moldings - Install

Serving North Plains, OR and surrounding areas

In business since 2011

Free estimates

Credit card accepted

"I have lived in this house for 25 years, and the only project I truly feared was siding.  I have made LOTS of changes to the property  over time, but always stopped short of siding.  This was a scary project, but I signed-up because of Fine Finish Remodeling's reputation on Angie's list, etc.   Also, the siding REALLY needed to be replaced -- in some areas, it was practically held together by paint.  Other exterior improvements (roof, front door and garage door) were being done by other contractors, during the same time period.

-- Mark Stevens is owner / contractor of Fine Finish Remodeling.  He did an excellent job of communicating and moving this project along, and referring out to others as needed.  The supervisor,  Kevin Dunsworth was great, and the house shows that. 

-- Delays happened, because they do.  The contractor had some issues. The weather was sometimes lousy.  PARR lumber delivered some of the materials to somewhere else, which stopped work for about a week.  Holidays happened. People had illnesses.   Siding work stopped while  the roof was repaired and replaced (2 days).  ETC.   In general, I was impressed to watch the changes take shape.  I believe it all moved along as quickly as it could.

--I was part of the problem too.  Two different garage door companies had volunteered their opinion that I could have one BIG garage door, rather than 2 smaller doors, if I wanted to do that.  It would be no problem, according to them.  I talked to Mark, about this, and he told me what could happen if the garage door men were wrong, and recommended I consult a  structural engineer first.  He gave me a name; I called; and the short version is a huge new beam was needed.  It took 6 men to lift that into place.  The final garage door outcome is perfect. Many thanks to Mark for coordinating the extra work my super-sized garage door required.

--Logistically, the siding was removed and replaced from sides and back of house first, leaving the street appearance somewhat intact until the end.  Hardie Plank siding comes with color, but the trim is just primed, so my family did a lot of painting in our garage, and other locations.  Kevin was kind enough to give warning when there was trim to paint for an inside angle, since that would have been nasty to do after it was installed.  I had one area outside the master bedroom that had always looked strange, for the way the old trim and siding met under the eaves.  I pointed that out, and Kevin fixed it with the new trim and siding. 

--When the house was finished, it was slightly wider than it used to be, sufficiently that the downspouts no longer fit. Mark gave me the names of area gutter companies, and the first one came right out and made new downspouts and cleaned the gutters too for a great price.

--The house exterior is done, and it looks great-- and the street noises are much quieter, and odd drafts are gone.  My scary project turned out to be a good experience with a happy outcome."
Recommended by89%of homeowners
...
Showing 1-10 of 93
FAQs for interior trim and decorative moldings installation projects in North Plains, OR

Installing crown molding can be challenging, depending on the material and your skill level. Lightweight materials like polystyrene and softwoods are easier for homeowners to install themselves, offering a cost-saving option. However, heavier materials like hardwoods and plaster are difficult to work with and require professional installation to achieve a high-quality result. Precision is crucial in measuring, cutting, and fitting crown molding, so hiring a professional ensures the best outcome.

Crown molding is available at various price points, ranging from $1 to $30 per linear foot, depending on the material. This wide range offers options for every budget. Affordable materials like MDF, PVC, and polystyrene provide cost-effective solutions, while premium materials like exotic hardwoods or metal offer a luxurious appearance at a higher cost. Regardless of your budget, you can find crown molding that enhances your home's aesthetic.

Crown molding is installed by professional finish carpenters or painters who specialize in detailed trim work. These experts possess the necessary skills and tools to ensure precise measurements, accurate cuts, and seamless installation. By hiring a professional, you can achieve a flawless finish that enhances your home's aesthetic appeal without the risk of common DIY mistakes.

Crown molding can be installed in various areas of your house to add elegance and architectural interest. It is commonly used where walls meet the ceiling, but you can also place crown molding around doors, windows, mirrors, and atop cabinets. Installing crown molding in these locations enhances visual appeal, creates a cohesive design, and adds a touch of sophistication to your home's interior.

To determine how much crown molding to purchase, start by measuring the length of each wall where you plan to install crown molding and add the measurements together to determine the total linear feet required. Purchase an extra 10% of material to account for waste from cutting angles and to ensure seamless joints by using full-length pieces when possible. Including additional material helps avoid shortages and ensures a smooth installation process.

For a professional crown molding installer, this task takes about 1 to 3 hours per room, depending on size and complexity. Factors like the material, design intricacy, and number of corners can affect the time. If you're doing it yourself, expect it to take longer as you get the hang of measuring and cutting precise angles. Advanced measuring and planning or hiring a pro can help the project go smoothly.

The North Plains, OR homeowners’ guide to interior trim and decorative moldings installations

From average costs to expert advice, get all the answers you need to get your job done.