Get matched with top sump pump repair or replacers in Delafield, WI

"Arrived on schedule. Went through the elimination process and determined problem was in the line to the pump or the pump itself (no water pressure). The service rep explained everything so that I understood fully what was going to happen. The pipe to the well motor was pulled up and a nickel sized hole was found in the pipe about 10 feet from the pump. The pipeline was galvanized metal and was very rusty. More holes were sure to develop; so, I had the whole line replaced. We also found the pump was 30 plus years old so, I had that replaced too. The service rep kept me informed through the entire installation process; as well as what to do after everything was completed. The pump had to be flushed with chlorine so, there is a short waiting process, tap flushing proceedure and water testing that he explained before leaving."

"I got suspicious, when the original installer tested the well the same day of installation, two of the tests came back as unsafe. <br /> Showed high levels of Coliform  & Arsenic. A Friend told me to call Hahn's pump service. I talked to Ben, & he said I should wait App. <br /> 2 Weeks & run the water 8 -10 Hours for a couple of days before testing. That's what we did. Jake, Ben's service man came out the next day, checked the whole water system & took samples. Four days later the results came back. All three samples cam back SAFE. <br /> Coliform & Arsenic were ABSENT. It's really nice dealing with a Honest & Trustworthy Company, that is very Knowledgeable & Competent at their Profession. They will have all my future business. Also, they would have been $800.00 Cheaper than the <br /> original installer."

"The senior project specialist was Jimmy. He did a great job of keeping us informed at all stages of the project (interior drain tile installation). Nanod was the plumber who did the final installation of the sump pump set-up and discharge configuration. Nanod did an outstanding job on the route of the discharge piping , having assessed that the originally considered discharge configuration might have adversely affected our neighbor."

"John was timely (same day repair), transparent and fair with cost, and very efficient with diagnosing the problem leak behind my wall. He explained the problem and his approach for repairing the leak thoroughly. He made sure he left left the place cleaner than when he found it. John gained a very satisfied customer here."

"The furnace repaired was completed very quickly and professionally."

"Great would recommend to anyone needing plumbing"

"Had well pump and casing replaced and new pressure tank installed. Scott was professional and kept me up to date through out the job. Any questions were answered right away. Job was done on time. Have recommended to friends and neighbors, all were very happy with the work performed."

"First trip out they told me my old faucet was not repairable (it was leaking). They told me a new faucet would be $325.00 or so. I told them I would buy my own and have them install. Plumber did a good job and was in and out in no time. Bill was $318.00 for 2hrs labor and $44.00 for materials for a total with tax $381.91 which I thought was high. I supplied the materials and $159.00 per hr. seemed high. But I was satisfied with the job."

"They came at the time we scheduled and took care of business. After assessing the situation, they informed me the old heater was beyond repair and gave me options to replace. They quoted a cost for parts and labor and the final bill was close to the quote. I hated having to spend money on repairs, but at least there were no additional surprises as this company stayed true to their word. Overall I was happy with the work done, and glad I hired them."

"The laundry room on the first floor had dryer venting that was convoluted and old modifications to the degrading plumbing lines that haven’t worked well in years. The walls needed to be opened to fix the plumbing and to move the electrical lines to function better with the front loader washer & dryer. The floors needed replacement too, so a total remodel was called for. I met Beth in the showroom to discuss options and then she came over to the house assess the situation. We settled on all new custom cabinets going up to the ceiling, new countertop, sink, faucet and porcelain tile on the floor. Tony the carpenter demoed the room, decided the best way to handle the dryer vent was to straighten it by building out the wall. To accommodate a bend in the vent, he built a knee wall to hide the vent and to provide a handy bit of counter to the left of the washer. He was ingenious in figuring out the best way to make this work! I can’t say enough about Tony. He was so professional throughout and his workmanship was above par! He was very good at keeping things tidy. Beth the designer helped me select a remnant of granite for the countertops, since I didn’t need a whole slab. When I was overwhelmed by hardware selections at the local hardware store, I called Beth and she came right over to rescue me and helped me make a decision. The only glitch I had was when we discovered that the original flooring had asbestos in it and would need to be remediated. An extra cost, but not really a surprise. Overall the project from conception to execution was performed by staff and workers who all had great skill in their respective fields from carpentry to design to plumbing and tiling. We were always kept informed as to what was going on and when people would be here."