Get matched with top storm door installers in Philadelphia, PA

"Worked fast and efficiently."

"Great job"

"They put a roof on my house which immediately leaked and had several areas of poor workmanship. It was brought to the owners attention numerous times. When they finally came out to look at the issues it was discovered my attic was filled with mold from the active leaks from their poor roof job. I had several engineers, roofing companies, insulation companies, as well as mold remediation companies state it was caused by the roof. The ridge vent was illegally done, stretched shingles etc and was not done up to code. They stated they would be back to remediate the mold months ago and have never showed back to take care of it. On the contract it stated if a subcontractor was used to install the roof they would be noted on the contract. They subcontracted this roof and did not have it noted on the contract. This is breach of contract they also did a roof for a friend of mine and subcontracted it out and did not mention it in contract. Another breach of contract This roof also has several issues that need to be addressed from poor workmanship. It is a shame it has come to this but I have given you chance after chance to make things right. I have documentation for everything to prove their poor work as well as breach of contract. This should have been claimed in your insurance policy for repairs. Make On Call your last call is what their slogan should be. Spend your money with someone that stands behind their work. Not these guys; sorry John, you had your chance. This is not the end. This is the beginning."

"Recently we hired Ardmore to replace the glass in 2 of our skylights and install a new storm door. Other than rain delays the skylights were installed in less than 2 hours as Ardmore sent 2 crews for the installation. They even came inside to vacuum any debris that might have fallen into the house during the installation. (5 out of 5). The installation of the storm doors was different. It took over 10 hours for 2 men to finish the installation which I felt was excessive and felt they didn't do the installation correctly. The difference between a good company and a better company is how well they fix a problem and to this point they are doing a better job. When I called to complain the scheduler immediately suggested they send out someone to inspect the work and within 3 days someone came out and fixed 2 out of the 3 problems and said someone would be calling me and ordering a replacement part to fix the 3rd problem"

"Kevin was excellent from the first phone call through completion of the project. friendly professional and incredibly knowledgeable regarding decks and repairs needed. I highly recommend Kevin."

"excellent work; carefully executed. Steve is very skilled all aspects of remodeling; dry wall, plumbing, painting, flooring, tiling and more."

"Excellent, no problems. My car was new the first year I used the service and there has never been any damage during the transports. The men picking up and delivering the car have always been pleasant and cooperative. Both Ely and Guy at United Transport has been highly responsive to my needs. I would highly recommend this company."

"This past weekend I had a bad experience. The short story is that an A. J. Perri technician diagnosed my furnace problem and wrote me an estimate for $1,600, parts and labor. It turns out my furnace had a different problem that required no parts and only 15 minutes of labor. Here are the details: This past Saturday my furnace stopped heating my home. I called A.J. Perri and they sent out a technician on Sunday morning. The tech ran some checks and concluded that my “inducer assembly” had to be replaced. Parts and installation would be $1,600. He said someone from the office would contact me on Monday and let me know when they could have the part. He also said that he couldn't be certain that there weren't other issues that wouldn't be found until the inducer was repaired. After the technician left I did some searching on the Internet. YouTube and Reddit were especially helpful. I discovered that the problem was that the condensate drain was clogged and water had backed up into the inducer assembly. The water prevented the pressure switches from detecting that the inducer was running and this prevented the furnace from starting. When I disconnected the condensate hose *2 quarts* of water drained out of the inducer assembly! This water was supposed to drain into a small pump unit on the floor that sends collected water to the sump. Over the years mold and algae had clogged the condensate trap and caused the backup. I disconnected all the hoses and removed the trap. I blew out the trap (making a mess) and confirmed that water would easily flow through it. I put it all back together and the furnace is working fine. The sad lesson here is that you can’t always rely on supposed experts. The good news is that the Internet can be your friend. Even more details: The original symptom was that the furnace would start up, the inducer motor would run for about 20 seconds and then it would shut off. This cycle would repeat every few minutes. Every few hours the furnace completed the startup cycle and then I’d get heat. Then it would stop heating for hours, and the indoor temperature would drop to the low 60s. What I learned from YouTube is that there are multiple stages for furnace startup. The inducer motor spins a cage that sucks in fresh air for combustion, and then pushes the hot gases through the heat exchanger and out the flue. Each stage in the startup has safety checks. The furnace will not ignite if the pressure sensors don’t detect that the inducer motor is working properly. Water is a byproduct of the combustion. It starts as a vapor but then condenses in the flue pipe and drains back to the inducer assembly, where it’s supposed to run through a hose to a pump that sends it over to my basement sump. The furnace is 14 years old. Apparently that’s long enough for mold and algae to clog the condensate trap and cause water to back up into the inducer. The 2 qts of water blocked the pressure sensor switches and so the furnace wouldn’t light. Final thoughts: For over 14 years I've had great experiences with A.J. Perri. They replaced my home’s original furnace and Air Conditioner units. They moved our outside A/C unit to the side of our house so we could have more quiet in the backyard. I had them come for periodic heating and A/C maintenance checkups. My impression is that they might cost a bit more, but they were reliable. I'm saddened that I need to post such a negative review."