Top-rated steam shower installers.

Get matched with top steam shower installers in Skokie, IL

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Steam shower installers in Skokie

Avatar for Concrete Crawlspaces & Basement Waterproofing Corp

Concrete Crawlspaces & Basement Waterproofing Corp

4.75(
154
)

Concrete Crawlspaces & Basement Waterproofing Corp

4.75(
154
)
Customers say: Super punctual
Recommended by 92% of Angi customers
Recommended by 92% of HomeAdvisor customers

Licensed Plumbing Contractor - SafeSeal by Concrete Crawlspaces & Basement Waterproofing. Crawlspace Encapsulation, Sewer Backup Prevention, Modified Overhead Sewers, Basement Floor Replacement, Underpinning, Foundation Crack Repair, Carbon Fiber Wall Straps, Wall Anchors, Spray Foam Insulation, Discounts for Angie's List Members. Financing available. Award winning.

"Steve Gavin, the owner came out and provided me with a great price that was inclusive of the entire scope of the project. During our meeting he took the time to explain the process that his company uses. Once the permits were issued the crew arrived the next morning at 7:00 a.m. as promised. The crew met the deadline for a 1:30 inspection from the Village of Deerfield. They not only met the deadline but they passed the inspection without any issues to be corrected. The crew worked until 7:00 p.m. completing the job. I would also note that they left my home spotless!"

Richard R on September 2019

Licensed Plumbing Contractor - SafeSeal by Concrete Crawlspaces & Basement Waterproofing. Crawlspace Encapsulation, Sewer Backup Prevention, Modified Overhead Sewers, Basement Floor Replacement, Underpinning, Foundation Crack Repair, Carbon Fiber Wall Straps, Wall Anchors, Spray Foam Insulation, Discounts for Angie's List Members. Financing available. Award winning.

"Steve Gavin, the owner came out and provided me with a great price that was inclusive of the entire scope of the project. During our meeting he took the time to explain the process that his company uses. Once the permits were issued the crew arrived the next morning at 7:00 a.m. as promised. The crew met the deadline for a 1:30 inspection from the Village of Deerfield. They not only met the deadline but they passed the inspection without any issues to be corrected. The crew worked until 7:00 p.m. completing the job. I would also note that they left my home spotless!"

Richard R on September 2019


CARROLL CUSTOM CONSTRUCTION INC

5.00(
3
)

CARROLL CUSTOM CONSTRUCTION INC

5.00(
3
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Over 20 years in Residential Remodeling and Commercial Property Management.

Over 20 years in Residential Remodeling and Commercial Property Management.


TM TILE & MARBLE LLC

5.00(
1
)

TM TILE & MARBLE LLC

5.00(
1
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

We work with Contractors, Architects, Designers, and Homeowners.

We work with Contractors, Architects, Designers, and Homeowners.


AVEA Inc.

5.00(
3
)

AVEA Inc.

5.00(
3
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

AVEA is a Home Automation and Security Alarm Contractor specializing in Control4 automation systems and Honeywell intrusion systems.

AVEA is a Home Automation and Security Alarm Contractor specializing in Control4 automation systems and Honeywell intrusion systems.


JPN Services INC.

No reviews yet

JPN Services INC.

No reviews yet
Free onsite estimate

We offer 18 month and 49 month financing on ALL flooring (carpet, tile, hardwood, laminate and vinyl) Currently offering Carpet from $3/sq ft (includes take up, haul away, tax, insatallation) all new ordes receive a free gift, free estimate and referral rewards. Also offering 20-30% of on all flameess fireplaces.

We offer 18 month and 49 month financing on ALL flooring (carpet, tile, hardwood, laminate and vinyl) Currently offering Carpet from $3/sq ft (includes take up, haul away, tax, insatallation) all new ordes receive a free gift, free estimate and referral rewards. Also offering 20-30% of on all flameess fireplaces.


Avatar for North Star remodeling

North Star remodeling

No reviews yet

North Star remodeling

No reviews yet
9 years of experience

Contractor

Contractor


jdsewer

No reviews yet

jdsewer

No reviews yet
13 years of experience

sewer cleaning handy man service

sewer cleaning handy man service


LauterWerks, Inc

5.00(
1
)

LauterWerks, Inc

5.00(
1
)
Customers say: Quality work
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Family-owned business.

Family-owned business.


Eichele and Valene Remodeling

2.25(
4
)

Eichele and Valene Remodeling

2.25(
4
)
Customers say: Terrific value
13 years of experience

Service is our priority! We build our company on quality and good service. Let us know how we can help meet your renovation needs!

"Ed Eichele has stated to us that he stands by his work and that he will do whatever it takes, that they are accommodating, open and transparent. Beware, Ed knows all the right things to say, just don’t believe any of it. Following are the issues we had with Eichele & Valene Remodeling: • Needed to hire a second contractor to rip out and replace our newly installed tile floor and takeover our project. • Had to remove and replace wood trim • Paint quality grade with option of 2 brands stipulated in our contract was not followed. An untrue story was given as to why a cheaper grade had to be used. • Promises of a building permit and an inspector appointment never materialized (3 months). After blaming the City of Wheaton building department for an unexplainable lack of action it turned out that the city never received payment for the permit we paid Eichele & Valene to execute as part of the contract. • Our walls were painted and floor installed before the plumbing and electrical work had been started let alone the drywall being finished. Our second crew took advantage of the floor being exposed to perform plumbing and electrical work by removing floor boards vs. access through the basement ceiling as was planned by John Valene. • Lack of a consistent work schedule; multiple no-shows without warning. • They still owe us money per their own records. Details: Tile – Through research of manufacturer’s websites, the Tile Council of North America, and consulting with a member of National Tile Contractors Association, we were able to confirm that the tile floor was laid improperly and needed to be 100% replaced. Some of the installation related issues: Our warranty for the subfloor and the tile was void due to the use of cheap drywall screws used to fasten the Durock subfloor rather than the required “1-1/4" USG Durock™ Brand Tile Backer Screws for wood framing (or equivalent) or 1-1/2" hot-dipped galvanized roofing nails”. As a result of improper installation, there was so much unevenness and lippage all over the floor that we were tripping while walking on the tile. Nothing sat squarely or level on it. The lippage of many tiles was the same thickness as a quarter or thicker. (See photos) Trim – We upgraded our family room from carpet to tile. It may not be obvious to all homeowners that the baseboards are installed prior to installing carpet, thus touching the floor that the padding and carpet are rolled over. For tile, the baseboards should be installed on top of tile, which put the baseboards noticeably higher on the wall. Since the baseboards were never removed prior to installing the tile the end result was a family room with oddly short baseboards as they did not sit on the tile where it should be if installed correctly. Furthermore, the staining and varnishing of the shoes was dreadful. Application of conditioner, stain and urethane was performed outside in 40 degree weather all within 6 hours. Per the Sherwin Williams website one needs to, “Let dry completely (usually 24 hours)”. In addition, the site states that one should; “Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 Fahrenheit.” The worst part about this baseboard fiasco was the calculated deception exercised where the eating area meets the family room. They removed baseboard from the eating area where it was installed at the correct height for tile to rip ¾” off of the bottom in order to match the height of the baseboard of the family room which was at the correct height for carpet. (See photo) Paint – We believe that painting before the drywall, plumbing, and electrical work were finished was a tactic employed to give us the illusion of progress after weeks of no work being performed. It was an obvious ploy to distract us from the fact that no progress had been made in weeks. We have since had to repaint all surfaces but 3 walls. Windows – There is an entire fiasco with regard to undersized windows being installed. The additional framing required to install windows that were too small led to the threat of additional “Change Order” costs. One might question why someone would install the wrong size windows. Menards remade the incorrectly sized windows as ordering the wrong size windows was their mistake. Eichele & Valene told us that we owed them the cost of a second installation even though they should have stopped when they realized that the windows were the wrong size. (See photo)"

Tom M on February 2019

Service is our priority! We build our company on quality and good service. Let us know how we can help meet your renovation needs!

"Ed Eichele has stated to us that he stands by his work and that he will do whatever it takes, that they are accommodating, open and transparent. Beware, Ed knows all the right things to say, just don’t believe any of it. Following are the issues we had with Eichele & Valene Remodeling: • Needed to hire a second contractor to rip out and replace our newly installed tile floor and takeover our project. • Had to remove and replace wood trim • Paint quality grade with option of 2 brands stipulated in our contract was not followed. An untrue story was given as to why a cheaper grade had to be used. • Promises of a building permit and an inspector appointment never materialized (3 months). After blaming the City of Wheaton building department for an unexplainable lack of action it turned out that the city never received payment for the permit we paid Eichele & Valene to execute as part of the contract. • Our walls were painted and floor installed before the plumbing and electrical work had been started let alone the drywall being finished. Our second crew took advantage of the floor being exposed to perform plumbing and electrical work by removing floor boards vs. access through the basement ceiling as was planned by John Valene. • Lack of a consistent work schedule; multiple no-shows without warning. • They still owe us money per their own records. Details: Tile – Through research of manufacturer’s websites, the Tile Council of North America, and consulting with a member of National Tile Contractors Association, we were able to confirm that the tile floor was laid improperly and needed to be 100% replaced. Some of the installation related issues: Our warranty for the subfloor and the tile was void due to the use of cheap drywall screws used to fasten the Durock subfloor rather than the required “1-1/4" USG Durock™ Brand Tile Backer Screws for wood framing (or equivalent) or 1-1/2" hot-dipped galvanized roofing nails”. As a result of improper installation, there was so much unevenness and lippage all over the floor that we were tripping while walking on the tile. Nothing sat squarely or level on it. The lippage of many tiles was the same thickness as a quarter or thicker. (See photos) Trim – We upgraded our family room from carpet to tile. It may not be obvious to all homeowners that the baseboards are installed prior to installing carpet, thus touching the floor that the padding and carpet are rolled over. For tile, the baseboards should be installed on top of tile, which put the baseboards noticeably higher on the wall. Since the baseboards were never removed prior to installing the tile the end result was a family room with oddly short baseboards as they did not sit on the tile where it should be if installed correctly. Furthermore, the staining and varnishing of the shoes was dreadful. Application of conditioner, stain and urethane was performed outside in 40 degree weather all within 6 hours. Per the Sherwin Williams website one needs to, “Let dry completely (usually 24 hours)”. In addition, the site states that one should; “Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 Fahrenheit.” The worst part about this baseboard fiasco was the calculated deception exercised where the eating area meets the family room. They removed baseboard from the eating area where it was installed at the correct height for tile to rip ¾” off of the bottom in order to match the height of the baseboard of the family room which was at the correct height for carpet. (See photo) Paint – We believe that painting before the drywall, plumbing, and electrical work were finished was a tactic employed to give us the illusion of progress after weeks of no work being performed. It was an obvious ploy to distract us from the fact that no progress had been made in weeks. We have since had to repaint all surfaces but 3 walls. Windows – There is an entire fiasco with regard to undersized windows being installed. The additional framing required to install windows that were too small led to the threat of additional “Change Order” costs. One might question why someone would install the wrong size windows. Menards remade the incorrectly sized windows as ordering the wrong size windows was their mistake. Eichele & Valene told us that we owed them the cost of a second installation even though they should have stopped when they realized that the windows were the wrong size. (See photo)"

Tom M on February 2019


XPERT FLOOD CONTROL INC

4.81(
110
)

XPERT FLOOD CONTROL INC

4.81(
110
)
Customers say: Quality work
Recommended by 95% of Angi customers
Recommended by 95% of HomeAdvisor customers

FLOOD CONTROL, SEWER, REPAIR, WATERPROOFING, DRAIN TILE, CRACK REPAIR, SUMP PUMPS, CATCH BASINS

"The work was done when they said it would be done. Completed very professionally and we have had several heavy rains since then with no sewer backup in our basement in Chicago."

Kim H on April 2022

FLOOD CONTROL, SEWER, REPAIR, WATERPROOFING, DRAIN TILE, CRACK REPAIR, SUMP PUMPS, CATCH BASINS

"The work was done when they said it would be done. Completed very professionally and we have had several heavy rains since then with no sewer backup in our basement in Chicago."

Kim H on April 2022

...
Showing 1-10 of 1003
FAQs for steam shower installation projects in Skokie, IL

A steam shower is a regular shower stall outfitted with a steam generator. Push a button, and the generator heats water to create soothing steam, and you’ve got an instant spa at about 110°F. Because it doubles as a standard shower, you don’t need extra square footage—just the right plumbing, a sealed enclosure, and proper ventilation.

Expect to spend roughly $0.50 to $1 on water and electricity for a 20- to 30-minute steam session. Actual costs depend on your local utility rates, but most homeowners find that the increase on their monthly bill is modest, even with regular use. To keep ongoing costs down, look for an energy-efficient generator and ensure your shower is properly sealed to prevent heat loss.

Flush the generator regularly to remove mineral buildup and maintain a steady steam flow. Most models have a drain valve or button—hit it after each session or as the manufacturer recommends. Skipping this essential maintenance step can trigger safety shut-offs or shorten the lifespan of your steam shower.

It’s not uncommon for homeowners to discover mold in their steam showers. Steam equals humidity, and humidity invites mold. Run the bathroom fan during and after each session, crack the door to allow air circulation, and wipe down the walls frequently. If you spot mold, spray undiluted white vinegar, wait an hour, then scrub—it’s an easy, chemical-free fix.

The Skokie, IL homeowners’ guide to steam shower installations

From average costs to expert advice, get all the answers you need to get your job done.