Get matched with top electrical switches, outlets & fixtures installers or repairers in Rio Rancho, NM

"The two service men were courteous, professional, friendly and efficient. All of my questions were answered and I am very satisfied with the quality of work performed."

"Great work"

"Excellent service, timely, efficient, neat, and cost-effective"

"Good service and happy with the work they did"

"I had some electrical problems and Jenna came out and gave me exactly what I wanted! She explained to me what she could do to solve my problem and she was going to put in some electrical boxes by my Internet router and I got exactly what I wanted. I’m extremely happy. She’s very knowledgeable, courteous, and a very nice person."

"Jeremy diagnosed and fixed the problem. He went beyond the immediate outlet problem and tracked down the real wiring issue. We tested everything and I am confident I won't have further problems. Jeremy is incredibly qualified, nice, explained what was happening, and I will definitely hire him for future electrical issues or upgrades. Yay for Angi in hel9ing me find great pros!"

"Everything went great! We were really pleased!"

"The kitchen and two baths that were remodeled in my home are just beautiful. This construction team is very professional, timely and experienced. They listen to their clients and are very helpful in finding the right resources and products for the remodeling project."

"Circuit breaker in garage was intermittently tripping. Scheduled appointment and received confirmation email for 3 PM on Monday, 3/4/2019. Receive call at 9:26 AM that technician is at my door. They mistakenly set the appointment for 10 AM. No problem, I took leave from work to meet them. They conducted somewhat superficial inspection concluding that there may be an overload (15-amp circuit) and that one of the connected appliances was culprit. They measured amps being pulled by only one appliance (mini-fridge at 4 amps) and concluded it must be the cause. I permenantly unplugged fridge and they installed new circuit breaker. They also closed off an outlet on a different circuit that was connected to a light switch in a different room (previous homeowners feculent install). Charge was $96.55; they did not charge for the new circuit breaker. I head back to work. Return home around 4:30 PM and circuit breaker has tripped again. I call Clayton (service tech) at 4:46 PM and ask him to advise. We conclude that I should systematically diagnose each appliance on my own to see which could be causing overload. I do so and determine that no matter which single appliance is plugged in, the circuit breaker still trips intermittently. I call Albuquerque Plumbing at 10:59 AM on Wednesday, 3/6/19 to request either a refund or to have technician diagnose further. Customer representative states that if they send out a tech, they charge an hourly fee of $110 no matter what, even though original diagnosis was seemingly not thorough nor conclusive enough to perform the work that was done. I state I will have a different company perform diagnosis and representative responds that if another company alters work performed by Albuquerque Plumbing, it will void their warranty (which makes sense, but I’m not concerned about a warranty on work that didn’t resolve the problem). I have a gentleman named Joe Wojcik with Powerhouse Electric come to diagnose. He spent 2.5 hours diagnosing everything on the circuit very thoroughly and was very professional. At the time, we thought cause was a loose connection at GFCI outlet. Charge was only $75. Ultimately, this didn’t resolve the tripping breaker. After posting initial review of service, Albuquerque Plumbing called and asked if they could come back out to diagnose further at no additional cost. I agreed. They spent about 1.5 hours diagnosing the circuit and all connections thoroughly but were still unable to reach a confident conclusion. We parted company under the impression that one of my tenants must be plugging in a malfunctioning appliance on occasion that is shorting and tripping the breaker. About 15 minutes after they leave, the breaker tripped while I was standing in front of the panel. This was perfect because I was able to determine that no one was using any appliance on the circuit at that time. knowing this, I was able to unilaterally diagnose certain lines on the circuit by disconnecting them and waiting to see if breaker trips. I believe I have isolated the problem cable on the circuit and will have it replaced."