Top-rated closet builders.

Get matched with top closet builders in Beavercreek, OR

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Closet builders in Beavercreek

Avatar for Kaminskiy Care and Repair Handyman Services
Kaminskiy Care and Repair Handyman Services
4.8(
24
)

Serving Beavercreek, OR and surrounding areas

Approved

Super Service Award Winner

In business since 2005

Emergency services offered

Warranties offered

"Start to finish, there was consistent communication and follow up on inquiries. Would highly recommend this organization to anyone looking to find a quality team to complete levels of work beyond what a lay-man homeowner doesn't want to tackle themselves."
Window replacement - before
Window replacement - after
After
Before
Finished look of the repaired corner

+7

Response time9 hrs
Response rate90%
118 neighbors recently requested a quote
Avatar for MRI Construction Services
MRI Construction Services
4.0(
30
)

Serving Beavercreek, OR and surrounding areas

Approved

In business since 2015

Free estimates

Credit card accepted

"Shannon was very responsive, went out of his way to gather our supplies during a run on that type of lumber, completed te work efficiently , was neat, and provide straight-forward advice on how to maintain the pergola.. I got three bids from other Home Advisor recommendations and his was the lowest."
Doors
Doors
Doors
Doors
Doors

+196

Response time8 hrs
1 neighbors recently requested a quote
Recommended by87%of homeowners
Avatar for Faithful Finishes Carpentry
Faithful Finishes Carpentry
New to Angi

Serving Beavercreek, OR and surrounding areas

Approved

In business since 2025

Small jobs welcome

We are a small residential general contractor licensed in Oregon offering a variety of carpentry services indoor+outdoor. \n\nOur professional background was largely in finish carpentry services working for well established companies in the industry: all door types, closet systems, railings, hardware and a variety of millwork ranging from baseboards, door casings, window casings, handrails, crown molding, etc. If it was made from wood and is inside your home, we did it.\n\nWe do outdoor work as well ranging from fences, decks, exterior doors/trim, etc.\n\nOur time in the trades taught us there is a right way and a quick way to do things and the RIGHT WAY is what we are most passionate about. We're motivated by providing people with a high quality of work because its what we would want if the roles were reversed!\n\nWe look forward to helping improve your space in whatever way we can with the skills we've acquired in our journey as tradesman and we thank you for your consideration.

Awning
Awning
Awning
Awning
Awning

+37

1 neighbors recently requested a quote
Avatar for The Renovation Company
The Renovation Company
4.5(
73
)

Serving Beavercreek, OR and surrounding areas

In business since 2011

Free estimates

Credit card accepted

"We hired Fine Finish (Mark) to design and build a 2-car attached garage with partially finished space overhead, including a small finished office.
It's hard to list all the ways Mark and Travis went above and beyond during our garage addition project. First, they worked through some of the worst weather an Oregon winter has to offer. While most of Portland was crippled due to flooding, Mark and Travis were hauling shingles up a 2-story ladder and installing our roof. When they were planning the gutter installation, they noticed that our existing gutters were still full of oak leaves. So they cleaned the gutters. They were especially patient with our 18 month-old son, who affectionately referred to them as the ?guys? and took a keen interest in everything they did.
Mark anticipated future design aspects that we hadn?t thought of like leaving space and wiring in the garage for a central HVAC
system. He asked insightful questions about future plans to make sure our money was spent wisely, now and in the future. Even during the design phase, Mark was very transparent about different cost-saving options and associated tradeoffs. 
We expected that once the work started, we would mostly be dealing with subcontractors. To our surprise, only the foundation work, gutters, and garage door installation were sub-contracted. Mark and Travis did all of the framing and finish work themselves. As a result, the quality of our addition is noticeably superior to that of our original home.
If you want someone to hire an army of people to throw your project together as quickly as possible, look elsewhere. If you want the attention to detail of a craftsman and an honest, no-nonsense interaction with someone who takes pride in his work and has your best interests at heart, talk to Mark. We?re glad we did and we?ll definitely be back in the future.

"
Recommended by89%of homeowners
Avatar for Arkansas Wood Doors
Arkansas Wood Doors
5.0(
8
)

Serving Beavercreek, OR and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
Additional Photos
Additional Photos
.
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
Design House Twenty Three
5.0(
4
)

Serving Beavercreek, OR and surrounding areas

"We purchased a home and needed help with remodeling as well as designing our new home. Alma was amazing, she found all the contractors and ensured they did an excellent job on our flooring as well as a full kitchen and 3 bath remodel. On top of that she found all of our furniture and decorate everything within our budget. The process was seamless, stress free and done within the promised time frame. Highly recommended!"
Recommended by100%of homeowners
Showing 1-10 of 49

The Beavercreek, OR homeowners’ guide to closet building services

From average costs to expert advice, get all the answers you need to get your job done.