Get matched with top closet builders in Bridal-veil, OR

"We hired Fine Finish (Mark) to design and build a 2-car attached garage with partially finished space overhead, including a small finished office.
It's hard to list all the ways Mark and Travis went above and beyond during our garage addition project. First, they worked through some of the worst weather an Oregon winter has to offer. While most of Portland was crippled due to flooding, Mark and Travis were hauling shingles up a 2-story ladder and installing our roof. When they were planning the gutter installation, they noticed that our existing gutters were still full of oak leaves. So they cleaned the gutters. They were especially patient with our 18 month-old son, who affectionately referred to them as the ?guys? and took a keen interest in everything they did.
Mark anticipated future design aspects that we hadn?t thought of like leaving space and wiring in the garage for a central HVAC
system. He asked insightful questions about future plans to make sure our money was spent wisely, now and in the future. Even during the design phase, Mark was very transparent about different cost-saving options and associated tradeoffs. 
We expected that once the work started, we would mostly be dealing with subcontractors. To our surprise, only the foundation work, gutters, and garage door installation were sub-contracted. Mark and Travis did all of the framing and finish work themselves. As a result, the quality of our addition is noticeably superior to that of our original home.
If you want someone to hire an army of people to throw your project together as quickly as possible, look elsewhere. If you want the attention to detail of a craftsman and an honest, no-nonsense interaction with someone who takes pride in his work and has your best interests at heart, talk to Mark. We?re glad we did and we?ll definitely be back in the future.

"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"Really happy with the work from RJO. Crew built a great fence for us."

"I am happy with all the work they have done."

"The providor was knowledgeable and competent.  He was able to answer our many questions!  The only problem was finding the backflow device.  The providor looked hard for it, and offered to come back to check it after we contacted the city to find out where it would be.  Turned out the city could not help us!
"

"     the job went well.  I was impressed."

"I had Ron build an enclosure around a new furnace with a bi-fold door for access. It looks like it has always been there. It fits right in."

"they did such an amazing job, everything turned out perfect and there was nothing i didn’t like! i would definitely hire again and recommend to others"

"They met with me to discuss a porch roof that was sinking. They were very responsive to what I needed. They were flexible about adding some additional work. Good communication. They gave me a detailed bid by email. They came out and worked promptly and had it done within the week.
They replaced existing roof support posts that were sinking through a rotting porch deck with ground-based posts. They also replaced an upper gutter and downspout.
"

"The project went very well. The quality of the materials was good and the craftsmanship was excellent. Rick arrived on time for appointments, worked hard, and built a beautiful deck that exceeded my expectations. I thought the cost was very reasonable for the end product that I received."