Top-rated interior trim and decorative moldings installers.

Get matched with top interior trim and decorative moldings installers in Churchton, MD

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Interior trim and decorative moldings installers in Churchton

Avatar for Rodriguez Home Improvement LLC
Rodriguez Home Improvement LLC
4.4(
193
)

Serving Churchton, MD and surrounding areas

In business since 2016

Free estimates

Credit card accepted

"The price was fair for the job done which is important however the overall job was mediocre at best. My kitchen is challenging with an 18' cathedral ceiling. I anticipated the highest parts of where the wall meets the ceiling the paint lines might not be perfectly straight. Even managing my expectations... not a single paint line is straight, they are all wavy, at the baseboard, around the door, where the ceiling height is only 8' - not a straight paint line to be found in my kitchen. Jose was very nice, cleaned up when the job was done and seemed to work hard. For those reasons I would have liked to give a better rating but when I look at the details, the job is just barely adequate."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+20

Recommended by83%of homeowners
Avatar for Walter Brown Services
Walter Brown Services
4.9(
79
)

Serving Churchton, MD and surrounding areas

In business since 1946

Free estimates

Emergency services offered

"I called multiple roofing vendors. Most would companies could not be bothered with considering doing a small job. While Walter Brown did not do the original install of my roof, but they definitely did not hesitate to offer to help. From Alicia who answered the phone to Tyler and Lisa who helped getting me on the schedule. Lisa, Tyler - thank you. If I need any type roofing services in the future, I will not hesitate to call Walter Brown. Thanks again."
CertainTeed Landmark Moire Black
Plywood replacement
Felt paper
Sample Finials
Custom Finial 1

+20

Recommended by100%of homeowners
Avatar for AMS Home Remodeling LLC
AMS Home Remodeling LLC
4.7(
25
)

Serving Churchton, MD and surrounding areas

In business since 2005

Free estimates

Emergency services offered

"As usual, it was a wonderful experience! Frank and the guys stayed in touch throughout the whole process. It was tricky because the work was done at a rental property. We had to get our tenants to move all the furniture from upstairs to downstairs or outside. We also had to keep them off the floors and stairs while the poly dried. Frank was wonderful, working his crews around our schedules to minimize disruption to our tenants. AMS crews helped replace the furniture, then all the downstairs stuff had to go in the garage while he put in carpet. I felt Frank did an excellent job in balancing our desire for quality work, but still understanding that this was a rental property, not our own home.
The floors look incredible. The stairs are a real treat. Rental properties take a beating and we were planning to recarpet the whole house. When Frank came out to measure, he discovered hardwood flooring under the carpet upstairs. Bingo!! We will not have to recarpet again!! The price was very reasonable and I am thrilled that he discoverd the hidden jem of hardwood!
Once again, we could not be more pleased. It was another perfect job by AMS!
"
Stairs & Rails
Basement/Bath remodel
Hardwood Flooring
Getting started
And before you know it!

+14

Recommended by91%of homeowners
Avatar for Ruxton Design & Build LLC
Ruxton Design & Build LLC
4.3(
262
)

Serving Churchton, MD and surrounding areas

In business since 1999

Free estimates

Credit card accepted

"They have been excellent to work with. Frank Zeberlein is a consummate professional who knows his business and ensures that only high quality work is completed and delivered. The kitchen is now a showcase! The guest bathroom is absolutely beautiful. They helped solve my water and mold problem in the basement family room with innovation and professionalism. And the exterior door they just installed is magnificent. I found their work to be so good I just contracted with them to completely renovate my master bathroom and totally reconfigure an adjoining closet."
Additional Photos
Kitchen
Bathroom
Fletcher bath
Fletcher bath 2

+42

Recommended by78%of homeowners
Avatar for James McGavin Home Improvement
James McGavin Home Improvement
4.6(
564
)

Serving Churchton, MD and surrounding areas

In business since 1993

Free estimates

Emergency services offered

"I gave them a B on price, because it wasn't anything spectacular, but it was certainly fair. After a week or so, it rained and we saw there was a slight leak on the gutters. Mr. McGavin came by on July 4th and fixed it."
new gutters and roofs we have done
new gutters and roofs we have done
new gutters and roofs we have done
new gutters and roofs we have done
new gutters and roofs we have done

+26

Recommended by90%of homeowners
Avatar for Tony Touch Painting & Flooring LLC
Tony Touch Painting & Flooring LLC
4.8(
89
)

Serving Churchton, MD and surrounding areas

In business since 2009

Free estimates

Credit card accepted

"I want to start off stating that I knew this was a complicated job due to the multiple locations needing to be addressed in different manners. Anthony was very accommodating, professional, and responsible. Even when Anthony had a medical reason to not be involved in managing, he was. The overall grade, however, would be a B-. I would still use them again and recommend their use.
At first, I thought I found our handymen for the rest of our projects. I told Anthony the issues in COMPLETENESS OF WORK with other contractors, and was assured there is no problem here.
My wife and I were told that the entire job would be completed in 3 days. I expected a week, but it ended up being 2 weeks and a day.  Communication was a challenge on both my end and theirs. There were times when I talked to Anthony about specifics and details that we had agreed on, but when the working crew came, there was a misunderstanding. For example, I wanted all doors to be painted semi-gloss white. When the job was done, I noticed the doors were only painted on the front (facing the hall). I was told that is what they usually do when painting doors, but I thought it was understood that painting the door is the entire door. A misunderstanding that was solved once it was brought up. We also had some issues in cabinet painting as the doors were closed before fully drying. When opened, paint was removed. This was brought up and was grossly resolved.
Here is a summary of the work:
Hardwood flooring-Looks great but had issues with the staining of the stair nose. This was corrected. They had to do a lot of work securing the sub-floor, which I thought meant silencing creaks. One creak was fixed and the other is right at the base of my stairwell. I was told this is due to the beams in my home, but they would check. I asked later about it as I still heard the noise and didn't notice anything to suggest the wood was taken up for the problem to be checked, but was told it was inspected and is the beam...
Painting in home-Walls and ceiling are great but doors and molding look like spots were missed.
Staining/painting of banisters-We have dark on top and bottom with white spindles. We had an issue with drying time and drip spots but was ultimately resolved. Looks great. Stains from banisters were noticed elsewhere in the house like on doors.
Kitchen cabinet-there was some back and forth with this because of the peeling of paint. Even when pointed out, not all was resolved. We also agreed to the painting and install of about 2 ft of crown molding on the top of a cabinet where it was missing, but this was not done.
The quality of work was ok, as I had to point out issues that needed to be resolved, and some were not. It got to the point where my wife and I were just ready to be finished with the entire process. Overall, the grade is a B- because of this and because the work was not as thorough as I had expected. Today I even went over some things that weren't fully completed and cleaning carpet from shoe stains.
 I reached out to Anthony for another job involving the installation of a pedestal sink, and painting plus installing shoe molding and 1/2 rounds. This is the powder room I had hardwood installed also, but when the sink/vanity was removed, some of the molding and rounds were not painted or installed on the sides after being told we were acquiring a pedestal sink for the room. I wanted to use Tony Touch again because I believe they have a great rep and maybe the communication was the predominant issue with my job. And he does work with you.
I just suggest being very detailed and descriptive when getting a quote for a job, ask questions, and inspect the work.


"
Additional Photos
Additional Photos
Additional Photos
Recommended by95%of homeowners
Avatar for E&R Home Solutions-An Escobar & Robb Company
E&R Home Solutions-An Escobar & Robb Company
4.7(
103
)

Serving Churchton, MD and surrounding areas

In business since 1976

Free estimates

Credit card accepted

"Ed with E&R Home Solutions was very easy to work with. All of the staff is professional. Inspection and proposal was completed in a timely manner. New roof was installed on date promised. They worked very hard to complete it within one-day, working into the late evening. Clean-up was okay, we do still find nails occasionally (work was completed approx. 2 months ago). I'm sure they did the best they could given the late time and poor lighting. Overall we are very happy with the work and will hire them again in the future if needed. We will also recommend to friends and family."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+3

Recommended by96%of homeowners
...
Showing 1-10 of 110
FAQs for interior trim and decorative moldings installation projects in Churchton, MD

Installing crown molding can be challenging, depending on the material and your skill level. Lightweight materials like polystyrene and softwoods are easier for homeowners to install themselves, offering a cost-saving option. However, heavier materials like hardwoods and plaster are difficult to work with and require professional installation to achieve a high-quality result. Precision is crucial in measuring, cutting, and fitting crown molding, so hiring a professional ensures the best outcome.

Crown molding is available at various price points, ranging from $1 to $30 per linear foot, depending on the material. This wide range offers options for every budget. Affordable materials like MDF, PVC, and polystyrene provide cost-effective solutions, while premium materials like exotic hardwoods or metal offer a luxurious appearance at a higher cost. Regardless of your budget, you can find crown molding that enhances your home's aesthetic.

Crown molding is installed by professional finish carpenters or painters who specialize in detailed trim work. These experts possess the necessary skills and tools to ensure precise measurements, accurate cuts, and seamless installation. By hiring a professional, you can achieve a flawless finish that enhances your home's aesthetic appeal without the risk of common DIY mistakes.

Crown molding can be installed in various areas of your house to add elegance and architectural interest. It is commonly used where walls meet the ceiling, but you can also place crown molding around doors, windows, mirrors, and atop cabinets. Installing crown molding in these locations enhances visual appeal, creates a cohesive design, and adds a touch of sophistication to your home's interior.

To determine how much crown molding to purchase, start by measuring the length of each wall where you plan to install crown molding and add the measurements together to determine the total linear feet required. Purchase an extra 10% of material to account for waste from cutting angles and to ensure seamless joints by using full-length pieces when possible. Including additional material helps avoid shortages and ensures a smooth installation process.

For a professional crown molding installer, this task takes about 1 to 3 hours per room, depending on size and complexity. Factors like the material, design intricacy, and number of corners can affect the time. If you're doing it yourself, expect it to take longer as you get the hang of measuring and cutting precise angles. Advanced measuring and planning or hiring a pro can help the project go smoothly.

The Churchton, MD homeowners’ guide to interior trim and decorative moldings installations

From average costs to expert advice, get all the answers you need to get your job done.