Get matched with top custom cabinets builders in Cleveland, OH

"Jerry was professional and took the project that others thought it was minor and would not. He delivered my butcher block countertops and refaced my cabinet doors. What a magnificent change to my kitchen. His work is excellent. I would highly recommend this contractor for your cabinet and woodworking."

"Rob Parken did an awesome job....very meticulous in his building process...would hire him again and will do so when I go to have wooden floors put in my home."

"I was in need of a contractor to do some work in one of my rental condominiums that I was preparing to put on the market. Bob and his crew did extensive renovation work of my rental condominium on the Gold Coast in Lakewood. All rooms were renovated with limited work done in the bathroom. Excellent work and great attention to detail. I have other rental condominiums that I will absolutely use Great Lakes Painting and Construction to renovate. Working with Bob and his crew was great, hard workers and they took pride in their work. I will absolutely use them to do work in my home."

Thank you for considering Ronald Nandor for your next project! With over 14+ years of experience and knowledge, we look forward to bringing your ideas to life.\nWe offer the absolute finest in custom carpentry for your home. Our skills & expert craftsmanship will provide a stunning finishing touch to any of your projects. Our expertise is in the initial design all the way through to custom build. We focus on Custom Cabinets, Custom Kitchens, Bathrooms, and Custom Furniture.We pride ourselves in the quality of our work because we absolutely love what we do. Please reach out to us today so we can get started completing your project with absolute satisfaction!\nCall today for a free consultation!\n

"Excellent work/service job on my cabinet microwave the contractor was prompted and efficient in his job thank you"

"The entire process was great. Eli was so easy to work with and very helpful in our cabinet selection. The cabinets are beautifully made and we couldn’t be happier. I would highly recommend them and would use them again myself."

"Denis Mullaney is as meticulous as I would be if I were doing the work myself, and that is saying a lot (if I may say so, myself !). He is honest about what he can and cannot do, but as a handyman, he seems quite capable to do everything I have needed him to do so far (moved electrical outlets, patched drywall holes, installed cabinets on uneven walls/floors in my old Cleveland Heights home). He will be re-installing baseboard and chair rail molding, and hooking up a water line to my fridge - I anticipate the same level of expertise. Denis was willing to work on a time and materials basis, whereas most of the other handyman services were not willing to do so (they insisted on bidding the whole job at one single price, which I do NOT like at all). While it has not been a problem, Denis arrived later than he said he would more than once, so I felt obliged to give him a B grade on punctuality, but I would have used B+ or A- if they were available. Life happens, and he has a very good work ethic, so I will definitely use his services for other projects, with no hesitation.
"

"Our kitchen was dark and dreary, with dark cabinets and minimal lighting. It was also inefficiently designed with a lack of counter and cabinet space. Matt designed and remodeled our kitchen so that it is now brighter and more spacious, including a large pass through window and counter between the kitchen and dining room. He painted walls and cabinets to coordinate with the dining room and lighten both spaces. He added white tile on the back splash along the counter behind the appliances which also brighted the kitchen. Additionally, he installed the white ceiling fan and light and white cabinet knobs to enhance the lighter look and feel of the room. My favorite features are the custom designed cabinets. They are one of a kind, functional, and beautiful! I love my new kitchen!"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"the lead person was very professional and did an excellent presentation.  Everything was spelled out and in writing.  That person was followed up with a measurement person  who laid out and measured everything and put it in writing.  This is where you need to have everything spelled out.  Next came the cabinet doors etc. and the installer, refinishers.  Everything is in writing and you are instucted to not sign off until the job is done till your satisfaction.  Another point here is that the installers were in a rush to leave so we didn't sign off because we wanted to really inspect the job and see if anything needed more work.  There were only a few things on our list after we went over everything.  The installer came back did everything on the list and we are very happy with the results."