Top-rated interior trim and decorative moldings installers.

Get matched with top interior trim and decorative moldings installers in Frederick, MD

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Interior trim and decorative moldings installers in Frederick

Avatar for E&V remodeling innovation
E&V remodeling innovation
5.0(
22
)
Interior Trim and Decorative Moldings - Install

Serving Frederick, MD and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Emergency services offered

"We were very happy with the work Edwin and his team did. They framed out our unfinished basement, unfinished drywall and painted. They put in extra time and care to make sure everything was done properly. We will definitely hire him and his team for future projects."
Framing Project
✨
Framing Project
Deck
Deck

+3

Response time3 days
Response rate100%
Recommended by29%of homeowners
Avatar for JW Home Improvement
JW Home Improvement
4.4(
5,749
)
Interior Trim and Decorative Moldings - Install

Serving Frederick, MD and surrounding areas

Approved (Corporate)

In business since 2001

Warranties offered

Credit card accepted

"We wanted to install a tiled kitchen backsplash to protect the wall near the stove from splatters but also to improve the appearance of the kitchen. We picked a tile from Floor and Decor and set out to find a contractor. The first contractor, highly recommended on Angi, came in and proposed an installation that would have cost over $6,000. That struck us as much too high. We then approached JW, which had done work for us in the past, and got an estimate that struck us as reasonable. But to get their top tile installer, Cesar Miranda, we had to wait nearly two months. We decided to wait and are glad we did. When he arrived, he brought three different grout and gave us our choice. He then did an outstanding installation."
Additional Photos
CARPENTRY SERVICE
EXTERIOR PAINTING
KITCHEN REMODEL
Jesse Wertjes with Angie!

+8

25 neighbors recently requested a quote
Recommended by87%of homeowners
Avatar for Your Vision Remodeling, LLC
Your Vision Remodeling, LLC
New to Angi
Interior Trim and Decorative Moldings - Install

Serving Frederick, MD and surrounding areas

Approved

In business since 2018

Free estimates

Emergency services offered

Your Vision Remodeling LLC is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.\n

Response time1 day
3 neighbors recently requested a quote
Avatar for KBR Kitchen & Bath
KBR Kitchen & Bath
4.6(
142
)
Interior Trim and Decorative Moldings - Install

Serving Frederick, MD and surrounding areas

In business since 2014

Free estimates

Credit card accepted

"Our experience with KBR was excellent. We started the renovation process by contacting multiple companies for quotes and designs. KBR was very prompt in response. KBR was always courteous and available at the agreed meeting times. Fatih, our designer, worked with us over multiple visits to help us design the new kitchen and pick out the cabinets, countertops, and hardware. Over a couple of weeks and several meetings, we were able to finalize the layout, cabinetry, countertops and outlets. The final design was set in a walkthrough at our townhouse with Fatih, Adam, the project manager, and Francisco, the technician. The on-site contractors were very courteous and tried extremely hard to keep our house reasonably clean. KBR lined the floors in the kitchen to protect our existing hardwood floor and lined the carpeted stairs from our ground floor to the second floor kitchen. The quality of the final renovation was excellent. As we discovered issues, Fatih, Adam and Francisco were readily available and helpful in resolving these issues. In the end, each issue was resolved to our satisfaction. The project was complete ahead of schedule. Despite the unanticipated issues, KBR was timely, efficient and professional. Furthermore, KBR paid attention to every last detail, including the final repaint of the entire kitchen. We are very happy with the finished product and we highly recommend KBR for those looking to renovate their kitchens."
Modern Kitchen Project
Farmhouse Kitchen Project
Contemporary Kitchen Project
Master Bathroom Project
Master Bathroom Project

+54

Recommended by92%of homeowners
...
Showing 1-10 of 179
FAQs for interior trim and decorative moldings installation projects in Frederick, MD

Installing crown molding can be challenging, depending on the material and your skill level. Lightweight materials like polystyrene and softwoods are easier for homeowners to install themselves, offering a cost-saving option. However, heavier materials like hardwoods and plaster are difficult to work with and require professional installation to achieve a high-quality result. Precision is crucial in measuring, cutting, and fitting crown molding, so hiring a professional ensures the best outcome.

Crown molding is available at various price points, ranging from $1 to $30 per linear foot, depending on the material. This wide range offers options for every budget. Affordable materials like MDF, PVC, and polystyrene provide cost-effective solutions, while premium materials like exotic hardwoods or metal offer a luxurious appearance at a higher cost. Regardless of your budget, you can find crown molding that enhances your home's aesthetic.

Crown molding is installed by professional finish carpenters or painters who specialize in detailed trim work. These experts possess the necessary skills and tools to ensure precise measurements, accurate cuts, and seamless installation. By hiring a professional, you can achieve a flawless finish that enhances your home's aesthetic appeal without the risk of common DIY mistakes.

Crown molding can be installed in various areas of your house to add elegance and architectural interest. It is commonly used where walls meet the ceiling, but you can also place crown molding around doors, windows, mirrors, and atop cabinets. Installing crown molding in these locations enhances visual appeal, creates a cohesive design, and adds a touch of sophistication to your home's interior.

To determine how much crown molding to purchase, start by measuring the length of each wall where you plan to install crown molding and add the measurements together to determine the total linear feet required. Purchase an extra 10% of material to account for waste from cutting angles and to ensure seamless joints by using full-length pieces when possible. Including additional material helps avoid shortages and ensures a smooth installation process.

For a professional crown molding installer, this task takes about 1 to 3 hours per room, depending on size and complexity. Factors like the material, design intricacy, and number of corners can affect the time. If you're doing it yourself, expect it to take longer as you get the hang of measuring and cutting precise angles. Advanced measuring and planning or hiring a pro can help the project go smoothly.

The Frederick, MD homeowners’ guide to interior trim and decorative moldings installations

From average costs to expert advice, get all the answers you need to get your job done.