Get matched with top window a/c unit service or relocation pros in Georgetown, SC

"I needed to replace the original heating/cooling unit in my condo built in 1998. I wanted to replace the unit with the same size. I got 3 estimates and Quality Air was the best price price and was a 15.seer unit. Plus they cleaned my dryer vent and will again in 6 months when they come out to check the unit. It took them 2 days due to the difficulty of getting the old air handler out. The walls around the air handler were practically built around it. They were able to get the air handler out without any changes or damage to my walls. They were very courteous and respectful of my carpet and property. They kept me informed along the way during installation. I highly recommend Quality Air. They answered all of my questions before and after my installation and I had plenty."

"Swift by name, and definitely by nature! At first, I thought “Swift” was just their last name—but it’s also the perfect description of their service. Scheduling was a breeze. They could’ve come out the same day, but since it was rainy and not too hot, I chose the first appointment the next morning. I received a text with my technician’s photo and a call about 30 minutes before arrival—great communication! EJ, my technician, was kind, professional, and very respectful of my not-yet-settled, slightly messy home. He was well-spoken, got right to work after a brief friendly chat, and checked both the inside and outside components of the system. Believe it or not, he didn’t find anything wrong. He mentioned it could be an intermittent issue, but rather than guessing or upselling me on unnecessary repairs, he was honest and transparent. That kind of integrity is rare and incredibly appreciated—especially in a specialized service industry. Tom, who was with EJ, handled the sales side but was equally knowledgeable. He patiently answered my (many) questions and explained what could be going on with the system. He also introduced me to their Comfort Club, which is genuinely a great value. For $199/year, they service your HVAC twice, waive all diagnostic fees (no limits), and give you 20% off repairs. Plus, their regular service fee is only $49—lower than most I've seen. Since my house tends to get warm in the evenings, they showed me what to check and encouraged me to call when it happens again. I hesitated at the thought of after-hours fees, but Tom said, “Join the club, and there won’t be a fee.” Simple and smart. I wholeheartedly recommend Swift Services. I'd gladly refer them to single moms, college students, or anyone who may feel unsure or overwhelmed when facing appliance issues. No pressure, no scare tactics—just trustworthy, efficient service. Exactly what you want when you're letting someone into your home. UPDATE: At 6pm i called because the AC was frozen (I thought.) EJ took the call, instead of the regular On Call Tech. He drove 40 minutes (I know this because the have a cool tracker) to come to my house. The AC was fine, again. I asked about a box on the side of the unit. Long story short, the previous homeowners had the power company put a Demand Restrictor on the unit which is limiting electricity to my AC and causing my sleepless nights. That'll be rectified ASAP, by the power company. "No Charge," said EJ."

"My HVAC unit quit working with temperatures in the 90's. I made an appointment, and Bakers updated me via text so I would know precisely when the technician would arrive. The technician was professional, courteous, and knowledgeable. He found and resolved the HVAC issue in short order. Pricing is very reasonable. I recommend this company without reservation."

Wilson Construction is a locally owned and operated company that values honesty and integrity in all aspects of our business. Our dedicated team of professionals has over 22 years of hands on experience, to provide innovative ideas and suggestions tailored to your projects. Our services are customized to your individual needs, paying close attention to the details of each project that we are involved with. Please feel free to contact us today!

"Went very well. Ronnie brought two to help him install the new unit. Was totally finished, everything cleaned up  and done under 2 1/2 hours.Did not charge for the first service call since I purchased the new unit. Also went under house and checked out the duct work to insure that I had no air leaks there.Would highly recommend this company to anyone needing work to their air conditioning . As Ronnie plans to start adding duct work cleaning to his services, I plan on using him for that when he gets his equipment.
"

"Mr. Ferrell worked with my husband over the phone to fix the problem. It was surprisingly fast and stress-free. To have the work done remotely in less than an hour was wonderful."

"This company was unable to help me with servicing my window units, as they only service HVAC units.
"

"I retained Advanta Clean, represented by Tim Kiser, to
provide surface mold remediation which was caused by excess humidity in my home
due to an air conditioning problem. Tim and his crew did an exceptional job.
The crew was meticulous and very conscientious working to remove the mold yet
at the same time causing no damage to the walls and surfaces. They were careful
to cover furniture and fixtures and 
treated my home as if it were their own. More importantly, Tim
guaranteed his work, assuring passage of mold clearance by an independent lab
before final payment was due. I highly recommend Tim Kiser and Advanta Clean
for mold remediation.
 
 
Joe L.
"

"The serviceman arrived promptly (and called beforehand to say he was 15 minutes out). He asked a few questions, made some measurements, explained what he found, replaced a capacitor and everything started running properly. He also took the time to discuss periodic servicing of the unit. I was very happy with the experience."

"So Many Problems!! (though they tried hard to resolve them) Do NOT make the mistake we did and let them talk you out of pulling a permit. The work by this contractor should definitely be inspected. MA Design quoted a low price, used cheap (Home Depot grade) materials, and relied on workers with limited English skills. Plumbing and carpentry were problematic, seemingly due to inadequate training for some workers, spotty communication and quality control from supervisors, and some sloppy attention to detail. We should add that our foreman, John L, and the workmen were willing enough to fix problems after we discovered them, though we had to pay for time and materials when we found MA Design’s quality standards to be unacceptable. The end result of the bathroom remodeling seems OK and we hope that no more nasty surprises turn up in the future. The two supervisors are generally courteous and anxious to please, but poor communication with their workers and sometimes with us seemed to be typical for this contractor. Here are specific examples of our problems: PLUMBING 1. The plumber (apparently not licensed) installed the wrong shower controller in the wall, tiled over the wall, then tried to hide this mistake by sticking on the control handle taken from the shower controller we had specified. Of course, the controller did not work properly and we discovered what had happened by poking through the unused shower parts and calling the manufacturer. To correct this error, MA Design had to cut a hole in the plaster wall of our hallway. MA Design did repair the plaster but now we have an additional painting job because of their mistake. 2. We also discovered that their “plumber” tried to attach the tub spigot to flexible PEX tubing rather than to a solid copper pipe anchored to a stud in the wall. The spigot worked loose in just a few days. No qualified plumber would have made such a rookie mistake. Repairing this error also required the hole in our hallway wall. Clearly, no qualified supervisor inspected the plumbing before the tile went up in the shower enclosure. 3. Just 2 months after MA Design wrapped up the work, we found a serious water leak coming from the ceiling below the remodeled bathroom. This ruined the ceiling and of course ruined the paint job we had just completed in the room below the leak. To their credit, the supervisor quickly came out, cut a hole in the ceiling, and replaced a flawed PEX tubing fitting with a quick-apply fitting to stop the leak. MA Design then cut away large sections of water-damaged ceiling in two rooms, let things dry out for a few weeks, and applied mold-kill spray to address the mold that had formed. It seems that a fitting on the PEX tubing was not properly crimped. This reinforced our belief that the MA Design workers doing plumbing on our job were not well qualified and that MA Design did not choose to or did not know how to inspect work adequately. Several weeks later, MA Design eventually had the joint repaired by a licensed plumber and repaired the holes in the ceiling. 4. The shower enclosure tiling was done OK for the most part but we found holes in the grout around some tiles. We suspect that the grout job was substandard for another reason: the grout sealing the tub to the floor is cracking and flaking after only 2 months. CARPENTRY 5. We replaced the bathroom window with a safety glass window but MA Design replaced the prior window trim and window sill with lesser quality trim and no window sill whatsoever. This was a complete mismatch with the rest of the house. MA Design quoted use of “standard” trim. If MA Design’s estimate assumed replacing trim with something so obviously out of place with the rest of the house, this should have been clearly stated in the quote. We ended up paying to rip out their trim and replace with trim that matched the rest of the house. In fact, the lumberyard’s “standard” trim exactly matched the trim elsewhere in the house so we felt that MA Contracting’s use of “standard” to describe their materials was deceptive. 6. They also installed a new window in an adjacent room. They made the exterior windowsill out of a very knotty piece of pine, inviting future rot. Even worse, no drip edge was cut into the underside of the sill, which could lead to water wicking under the sill and getting into the exterior siding. No well qualified carpenter would have made a mistake like that. PAINTING 7. MA Design did very little painting for us, just some primer application after drywall installation. Still, the workman on our job made a rookie mistake. He applied primer to a repaired ceiling with a rough wall roller and then applied primer to the doorway trim with that same roller rather than with a brush or smooth roller. The result: the formerly smooth doorway trim now had a rough, thick layer of paint that looked and felt awful. It took us 2 hours of sanding to restore the doorway trim to a smooth surface. This experience reinforced our general impression that many, if not most, MA Design workmen are not properly skilled or trained for the work they are doing. COORDINATION & COMMUNICATION 8. We agreed at the outset which fixtures were to be bought by MA Design and which by us, but MA Design sometimes bought the wrong items, which resulted in confusion and delays. In many cases, we ended up buying the needed fixtures ourselves just to keep the project moving. 9. On at least 10 days, workers were expected but none showed up and MA Design did not call to inform us of this in advance."