Get matched with top faucets, fixtures and pipes repair or replacers in Greenbush, MA

"CMK was very professional from start to finish. They showed up on time and very quickly repaired my burst pipe. I will definitely be using them again for any of my plumbing needs."

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"Moses and his assistant (Lovely) were timely and cost effective. Came immediately to provide the estimate. The work was satisfactorily completed on same day. Quality service, would recommend."

"TPK LLC did an amazing job unclogging my kitchen drain. They were professional, quick, and got everything flowing perfectly again. Great communication, fair pricing, and excellent service. Highly recommend!"

"I called Joe twice. First I hired him to change the fixtures of my shower. The shower is old so it wasn't something I could do. He did a great job. The guy's a master plumber, licensed and all. Second, about a month later I had a leak and water leaking from the shower arm into my wall. I called JOE and he showed up an hour later and fixed it! As always, this was not a simple job due to the fact it's an old bathroom but Joe got it done. Quality work with exceptionally reasonable prices from a master plumber. Nice guy too. I'll be calling again for all my issues."

"Brandon did a number of other smaller jobs we asked throughout the original SOW and was receptive to everything we asked for. We could not be happier with his work and character as a professional and person. He provides a line-by-line item SOW, down the cost of material for masks and gloves. As the SOW changed, Brandon continuously updated the document. He saved us some money numerous times as portions of the SOW were deemed unnecessary by either him or us. That is rare. Highly recommend Superior to anyone! It's like hiring family members to do the work, but the family members actually show up and finish! He truly has your best interests in mind regarding time of completion, requests, changes, and price."

"If you need a reliable plumbing, HVAC and electrical company then I highly recommend Boston Standard Company. I have a 5 zone heating system and a 3 zone cooling system, so a lot of moving parts. From setting up my appointment to having Brandon the technician arrive at my home, the process was easy and hassle free. When Brandon arrived , he talked me through everything, including getting me ready for my eventual replacement. I know we all want to hold our systems together with duct tape and prayer, but I know the day is coming where even God himself couldn’t get another year out of my AC. All my options were explained to me up front, and the price was agreed upon to perform the work. Brandon did great work! Yamira in the office was great! Happy I called!"

"Everything went great! Needed to find a local plumber in an emergency on a Saturday and Chris was able to be there within 30 minutes of talking to him. He observed the job and communicated what would need to be done and fixed/replaced everything that needed to be. He did tremendous work and I will definitely be calling on him again should I need something done in the future!!"

"The water heater replacement went really well but they haven’t called me when I wanted more services.  They went above and beyond to make it elevated in case my basement flooded again.  Two or three people came out."

"The cabinets were 60 years old and they made them look like new! It was great! They were awesome. They bent over backwards to make it just what we wanted. They even hired some cleaners afterwards. They went above and beyond considering we hired them originally to be painters. They were able to deliver! They stood to their estimates. We got three estimates and they were the best too. They were reasonable with their costs and the job was quick. They had 3-4 workers on most days. Everything looks really good! They always responded to phone calls. We never feltignored and always got our answers."