Get matched with top closet builders in Higley, AZ

"From my first contact with Jodi our salesperson to Trish in the office and our installer Derrick the entire experience was very positive.  I interviewed two other companies and went with Triton due largely to the people and quality of their product. I even went to their shop before making my final decision, met their team  and was impressed with the sample cabinets in the showroom.  They met my install schedule and the Elite cabinets are outstanding in terms of quality, appearance and functionality. The cabinet install was clean and every  promise made was kept. I would definitely use them again. You can't go wrong with Triton."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

5 EMPLOYEES. NO SUBS. COST IS DETERMINED BY THE JOB. NO TRAVEL CHARGES. NO SERVICE CHARGES. NO EXTRA CHARGE FOR AFTER HOURS SERVICE. LICENSE NUMBER 210281. MAY CONTACT THROUGH EMAIL.

"We went in for a design appointment and made all our selections. Then a job walk was done with Ray and Shane our project manager. Shane reached when the project was ready to get started and they were at my door that morning. They were some delays throughout the project, where I had to wait for supplies to come in. But Shane and Ray always returned my calls and made me feel good whenever I had a concern. If a mistake was made they made sure it was corrected. In the end I was a happy customer, even though I had a few inconveniences it was all made good and Ray said all feedback is good for him so they can improve in any areas needed. I would consider CKBR again and suggest you do too, I think when your spending money like this for a remodel. Of course you don't want delays but like my old boss would always say "it comes with the territory". What you really want, is knowing someone is going to pick up the phone when you call, and that they show you they care and appreciate your business. So because of this, I give them an A!"

"For starters-take a number and wait hours and days to get a one on one with a consultant. Wont take appointments call aheads etc. and the consultants are all on commission so forget about having a consult or making modifications at your convenience based on your schedule. If you start with one consultant another consultant will NOT help you or get involved. Next you are buying a mass produced low quality product made of MDF with a thin veneer coating of real wood on top which dents and scratches easily and the Price is outrageous for what you get. They want 50% upon order and no modifications without another charge if you don't like something about it when you receive it. I am moderately pleased with my final product. Wall unit was not well proportioned, which I fault the consultant/designer with. I overpaid immensely for what I got. Having made the mistake of using them to build my office, I found and commissioned a private woodcrafter to design and build a beautiful custom entertainment center made of solid wood and custom, handcrafted iron hardware and handles made in Italy and France, complete with lighting and hand painted with gold accents for a fraction of what I would have paid Stone Creek.
"

"John removed some cabinets in my garage. I appreciated that he called ahead to notify me of his arrival time. While performing the job, he was very friendly and helpful with some electrical issues. John is highly knowledgeable and skillful in a variety of home repair and maintenance concerns. I highly recommend this business anyone."

"the service was good. They just did a really good job and I would recommend them to anybody."

"Max Build was easy to work with and did top notch work."

"LIGHTING QUICK RESPONSE TIME. THANK YOU."

"Jc was very professional and very reasonable. His bid came in 30,000 less than Home Depot. Awesome work! I highly recommend!"