Get matched with top sump pump or interior foundation drains installers in Middleboro, MA

"Great job on 2 sump pump installations"

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"Jeff M. was the technician for the annual service for my two sump pumps in the the basement. He was very nice and completed the job in a timely fashion. The product itself that we have of a french drain system and 2 sump pump works and we have not had any water in the basement since getting it installed. I would recommend Busy Dogs product to anyone."

"The service we had was to have a slow-running drain unclogged. The work was fine and as we expected. Our complaint would be that we paid twice what I thought it would cost to clear one drain. The only reason we went ahead with the work was that the drain had been clogged for several days and we just wanted it cleaned. we will not be going through Angis list for our next service."

"TPK LLC did an amazing job unclogging my kitchen drain. They were professional, quick, and got everything flowing perfectly again. Great communication, fair pricing, and excellent service. Highly recommend!"

". This company has done a plethora of work for myself and my family. He has installed appliances such as dishwashers, washer and dryers, garbage disposals, faucets and sinks, a hot water heater, and a gas boiler. He is very trustworthy and knowledgeable about what he does and stands by his work. If there is an issue, he will get back to you and fix it in a timely manner. His pricing is reasonable and he does excellent work. I would recommend anyone to use him."

With over 75 years of experience, GEM provides trusted plumbing services for homeowners in the Plymouth, MA area, as well as across Cape Cod. Our licensed plumbers handle everything from leak repairs and drain cleaning to water heaters, fixture installations, and emergency plumbing service.\n\nWhether you're dealing with a clogged drain or a sudden leak, we deliver fast, reliable solutions to keep your home running smoothly.

When you need an emergency plumber or a drain cleaner, call Roto-Rooter Plumbing & Water Cleanup. Your fast & reliable plumber can fix any plumbing problem, including sump pumps, toilet repair, faucet repair, faucet replacement, garbage disposals, water heaters, bathtubs, showers, and outside faucets. Roto-Rooter is best known for drain cleaning & sewer cleaning. We fix drain clogs, clogged toilets or sinks, blockage of main sewer lines, slow draining shower and bathtub drains, sewer lines and leaking or burst pipes. We also specialize in water damage restoration & water cleanup services. We can fix and clean up your flooded basement too. Roto-Rooter is a 24-hour plumber near you and provides emergency service.

"Van was great! He can as he said and worked until the drain was cleared!"

"Julio and his crew did an excellent job. I would give them an A+ if I could. They are the best plumbers I have had to deal with, with honest pricing, far lower than I would have had to pay otherwise. He even did a camera inspection of the pipe at no extra cost. This whole project could have cost me thousands that I did not have to spend and days of stress because this was the main waste line out to the street. The work was cleanly and professionally done and he kept me informed the whole step of the way (even as I had to be upstairs teleworking). I would definitely use AFFORDABLE DRAIN FLOW again and highly recommend them."