Top-rated spray foam insulation pros.

Get matched with top spray foam insulation pros in Seattle, WA

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Spray foam insulation pros in Seattle

Avatar for Insulation Northwest
Insulation Northwest
4.8(
98
)

Serving Seattle, WA and surrounding areas

Approved

Super Service Award Winner

In business since 2006

Free estimates

Warranties offered

"Insulation NW did an excellent job of removing old inadequate insulation from an attic and crawlspace and replacing it with new insulation and wrapping the ductwork. They had two crews, one for the attic and one for the crawlspace, working for many hours to complete the job. A vapor barrier was also installed in the crawlspace. We paid a very reasonable price after the large PSE Rebate was applied."
Additional Photos
Additional Photos
Additional Photos
21 neighbors recently requested a quote
Recommended by81%of homeowners
Avatar for AT Foam
AT Foam
5.0(
5
)

Serving Seattle, WA and surrounding areas

Approved

In business since 2003

Free estimates

Warranties offered

"Unbelievable company such great work. John is one of the best business man I have ever dealt with he deserves 20 stars. And his crew does to if you ever need insulation go here. No place else. Best in the state 👍👍👍👍👍"
Roof deck closed cell spray foam
SPF roof deck
SPF ceiling and gable end wall
Flat ceiling 2lb closed cell
Flat ceiling roof deck

+21

Response time10 hrs
Response rate98%
2 neighbors recently requested a quote
Avatar for PNW Insulation, LLC
PNW Insulation, LLC
4.7(
250
)

Serving Seattle, WA and surrounding areas

Approved

In business since 2015

Free estimates

Warranties offered

"I hired PNW insulation to spray foam my 30x50 metal building. Ruben arrived on time for the estimate appt and was thorough explaining the process.. I had 4 other bids before PNW. On install day the team arrived on time. It took 2 days to complete the job. I am very happy with the end results. I would recommend PNW insulation to any one needing spray foam work done. They did a great job"
Before
All insulated
Final with Wmp
Getting ready to start
Inside office

+22

Response time1 day
Response rate93%
47 neighbors recently requested a quote
Avatar for Lake Atitlan Insulation, LLC
Lake Atitlan Insulation, LLC
5.0(
20
)

Serving Seattle, WA and surrounding areas

Approved

In business since 2021

Free estimates

Credit card accepted

"We had Lake Atitlan Insulation remove our old insulation and replace it with R-38. I enjoyed working with Nanni from the initial meeting to the final step of installing the insulation. Very knowledgeable lady and truly exceptional customer service. A highly recommended insulation contractor."
11 neighbors recently requested a quote
Recommended by5%of homeowners
Avatar for Insulation Co., LLC - Removal & Clean Outs
Insulation Co., LLC - Removal & Clean Outs
4.9(
216
)

Serving Seattle, WA and surrounding areas

Approved

In business since 2009

Free estimates

Warranties offered

"Insulation Co (Jo Estrada) had insulation installers come to our century old house to remove old attic insulation, do a bit of mold remediation, insulate the bathroom fan exhaust, cover the two previously open gable spaces at either end of our roof, then blow in new cellulose insulation. All this took a day, and all was cleaned up like nothing happened. Polite, efficient, professional, and the price was competitive."
1
2
3
1
2

+46

Response time5 hrs
Recommended by51%of homeowners
Avatar for Madrona Insulation
Madrona Insulation
4.9(
68
)

Serving Seattle, WA and surrounding areas

Approved

In business since 2009

Free estimates

Warranties offered

"Fantastic. Of all the home improvement companies who have worked on many different jobs at this house in six years, Madrona takes the cake for providing the best quality work and amazing customer service. Madrona was the only company who gave us a thorough plan to not only put insulation in the attic but also to improve ventilation and ensure all roof penetrations were properly sealed. They added 1300 ft of R-44 blown fiberglass insulation over existing rock wool insulation that was fine but inadequate, to bring it to R-49. They fashioned a new wood access panel to the attic with a huge covered batt of fiberglass insulation fastened on the upper side and it feels like opening a secure air lock on the rare occasions where we've looked up into the attic. After they sealed all air penetrations in the attic they were very happy to show us what they did before adding the insulation. They installed insulation shield around the chimney, six roof jacks for proper venting, and vented kitchen and bath fans to dampered roof jacks, insulated with R-11 fiberglass batts. Four years later, the attic looks fantastic - there is no sign of any moisture and the blown in insulation looks as fluffy and lofty as when it was newly installed. I mistakenly thought one of the bath vents had been filled with insulation foam, causing the fan to not work very well, and Madrona sent someone out the next day even though the job was completed four years ago. Curt investigated and then politely and patiently explained that the side vent had been replaced with a better roof vent. And indeed, the fan was blowing air through the roof vent they installed and it is the old fan that is the problem, not Madrona's work. It would be wonderful if all companies stood behind their work this way."
.
.
7 neighbors recently requested a quote
Recommended by96%of homeowners
Avatar for Insulation Pro Inc.
Insulation Pro Inc.
5.0(
19
)

Serving Seattle, WA and surrounding areas

Approved

Super Service Award Winner

In business since 2025

Free estimates

Warranties offered

"We literally been roasted in our house especially on the second floor with that late heatwave going on . Eric from Insulation Pro took care of our attic. Full insulation replacement. Some mold problems and vents to reconnect . I was skeptic I even tested with the thermostat furnace but it literally did the job. Couldn't be happier."
Attic project
During job progress
During process
Crawl space full service
Before project crawl space

+59

Response time5 hrs
Response rate91%
7 neighbors recently requested a quote
Madrona Home Services, LLC
4.7(
74
)

Serving Seattle, WA and surrounding areas

Approved

In business since 2010

Free estimates

Customers say: Quick response

"We had a wonderful attic insulation experience with Madrona Home Services! They had the best pricing, including the Puget Sound Energy discount and they managed all the paperwork. We were able to schedule two weeks after the quote, and their team worked fast and efficiently on installation day. They removed old saw dust insulation and laid down batting, as well as going above and beyond by creating an 8x8 storage platform. Our house feels noticably cozier with consistent temperatures. 10/10"
Response time1 day
7 neighbors recently requested a quote
Recommended by100%of homeowners
...
Showing 1-10 of 174
FAQs for spray foam insulation projects in Seattle, WA

Local and federal rebates are available for insulation installation, which can significantly reduce your overall costs. Many utility companies offer incentives or rebates to homeowners who improve their home's energy efficiency. Contact your local energy provider or government agencies to learn about available programs in your area, and consult with a professional insulation installer to maximize your savings.

It's not necessary to remove old insulation before adding new insulation, as long as the existing insulation is in good condition—dry, free of mold, and not damaged. Adding new insulation on top of old insulation can improve your home's energy efficiency by increasing the overall R-value. However, if the old insulation is wet, moldy, or damaged, it's best to remove it before installing new insulation to prevent potential health risks and ensure optimal performance.

Insulating a house takes between five and twelve hours for batts or boards, and two to five hours for spray foam or blown-in insulation. The exact time depends on the size of your home, the type of insulation, and the accessibility of the areas being insulated. Keep in mind that projects may take longer if old insulation needs removal, if there's a larger square footage, or if spaces are difficult to reach.