Get matched with top carpenters in Vienna, MD

"Home Genius was very efficient with their work and did a great job with our siding install. The crew worked hard to get it done and we would certainly consider them for future projects."

"I had a leak in my utility room from the storm. They sealed the door way and took out the weak wood and installed a new strong flooring. They also repaired my sliding glass doors which would not open and close correctly. Another carpenter told me that I needed new sliding glass doors. King's Son Services, LLC took off the doors and installed new wheels and the door opens and closes like new. My flooring looks awesome and strong. Their expert service is much appreciated and I would recommend them to everyone. I have already recommended them to two friends."

"Justin Greenberg was recommended to me for work to be addressed at our 1830’s farmhouse property. Initally I needed to have a small barn/woodshed rebuilt including, siding, roofing, window installation, and painting. The project was completed successfully, within my budget and on time. Justin’s carpentry skills were used to refurbish a utility trailer. An old split rail fence was in need of repair and he secured the materials to bring the fence up to par with the existing fencing. Several of our mature trees needed a degree of topping/trimming. Justin proved to be skilled in this area of landscaping. Justin installed an electric wench/lift in the barn to raise our lawn/garden tractors for servicing. In short, Justin is my go-to handyman for small and large projects ."

"Walt is a great guy who I am glad to have hired. He cares about delivering quality workmanship and does not hesitate to stand behind his work. They did a great job on my kitchen! When everything was said and done there was an issue that required immediate attention. He and another guy came that same day and took good care of the situation. We are very pleased!"

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

"Loved the quality and craftsmanship!"

"Mr. Yoder started construction in November, approximately three weeks later than planned. This was due to his having been unexpectedly hospitalized with appendicitis. However, in that time he kept us completely informed as to his status and when he expected to start by calling us at least once a week. He also ensured all government paperwork and permits were obtained and this effort was part of the final bill.

The work went very smoothly, with some inevitable, though minor delays due to bad weather (it was November and December, after all). He cleard the foundation area and three-foot-deep holes for the main support posts, which were anchored with cement. He next put up all of the framing, siding, roof, etc. and installed the windows and doors.

Work such as laying the concrete for the floor, intalling gutters and downspouts and electrical work were handled by subcontractors, the price of which also was included in the final bill. Please note, the original asking price was about $19,000, but we requested some additions, such as wall insulation and installing a new sidewalk concurrent with the garage foundation, which added to the price.

The work began on Nov. 16, 2011, and was finished just before Christmas.

We have photographs of the work in progress and the finished garage available to be emailed to anyone interested in seeing Mr. Yoder's work."

"A painter informed be that my chimney crown had deteriorated and needed repair/replacement. I contacted multiple companies to assess the job and make proposals. The folks at First Class Chimney were very professional from initial contact, scheduling appointments and scheduling the job. There proposal was straight forward and a greater value than other company's I spoke to. They performed the work and I am extremely happy with their work and my experience doing business with them. I highly recommend them for consideration."

"Joe was with me the entire process - insurance thru completion. Joe first went with me to meet with the insurance claims adjuster. He jumped right in with the demo crew to demo the affected areas and determine the extent of the damage. Joe re-insulated and hung new drywall, he re-did the bathroom and four other rooms. It was a huge job and things kept getting added by me - like let's repaint. the porch, the kitchen, the ceilings in the dining room...you get the idea! Each time I wanted something else, Joe's response was always the same, "No problem." The work is excellent. It has been long and full of surprises due to really old construction. But it is done and beautiful. If there is a particular aspect of the job that joe wasn't licensed in, he called in a certified contractor. For example, the plumbing was done by a plumber. I'm pleased and already hired him for a few other things back at my house. Great personality, great work and great ideas to make every project work best.
"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"