Top-rated new windows service pros.

Get matched with top new windows service pros in Dumont, NJ

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find New windows service pros in Dumont

Avatar for Tri-State Window Factory Corp

Tri-State Window Factory Corp

4.79(
419
)
Approved Pro

Tri-State Window Factory Corp

4.79(
419
)
Approved Pro
Customers say: Quality work
Recommended by 92% of Angi customers
Recommended by 92% of HomeAdvisor customers
2575 local quotes requested

Tri-State is the manufacturer and installer of premium quality vinyl windows and patio doors. We do the entire job ourselves, no subcontractor or middleman! Tri-State builds them, installs them and we guarantee them.

"Fast good price clean"

Jason H on September 2024

Tri-State is the manufacturer and installer of premium quality vinyl windows and patio doors. We do the entire job ourselves, no subcontractor or middleman! Tri-State builds them, installs them and we guarantee them.

"Fast good price clean"

Jason H on September 2024


rams home improvement

No reviews yet

rams home improvement

No reviews yet
41 years of experience

work alone or with 1 or 2 helpers.charge by the hour or the amount of work

work alone or with 1 or 2 helpers.charge by the hour or the amount of work


Bailey Remodeling

5.00(
6
)

Bailey Remodeling

5.00(
6
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

We are a family company that offers quality craftsmenship at an affordable price. We believe in always doing our very best. That means going above and beyond to surpass expectations and make sure your home is everything you want it to be.

We are a family company that offers quality craftsmenship at an affordable price. We believe in always doing our very best. That means going above and beyond to surpass expectations and make sure your home is everything you want it to be.


Avatar for Auto Transport - United Freight Of America

Auto Transport - United Freight Of America

4.84(
920
)

Auto Transport - United Freight Of America

4.84(
920
)
Customers say: Quality work
Recommended by 96% of Angi customers
Recommended by 96% of HomeAdvisor customers

United Freight of America is your all inclusive transport solution. CONTACT US FOR A QUOTE. please include pick up and Drop off locations and vehicle information

"Excellent, no problems. My car was new the first year I used the service and there has never been any damage during the transports. The men picking up and delivering the car have always been pleasant and cooperative. Both Ely and Guy at United Transport has been highly responsive to my needs. I would highly recommend this company."

CLAUDIA H on October 2021

United Freight of America is your all inclusive transport solution. CONTACT US FOR A QUOTE. please include pick up and Drop off locations and vehicle information

"Excellent, no problems. My car was new the first year I used the service and there has never been any damage during the transports. The men picking up and delivering the car have always been pleasant and cooperative. Both Ely and Guy at United Transport has been highly responsive to my needs. I would highly recommend this company."

CLAUDIA H on October 2021


BDK Construction LLC.

No reviews yet

BDK Construction LLC.

No reviews yet
19 years of experience

Growing construction company able to complete all phases of new and old construction

Growing construction company able to complete all phases of new and old construction


Avatar for KrackTech, Inc.

KrackTech, Inc.

No reviews yet

KrackTech, Inc.

No reviews yet
10 years of experience

KrackTech, Inc. provides affordable service solutions to Personal, Home Office, or small to medium sized businesses by improving their performance and by assisting them in adapting to ongoing technology changes. We specialized in Onsite Services and Commercial / Residential Repair KrackTech, Inc. is a computer repair service. It was conceived in 2015. Today, our company employs Professional Certified Technicians and IT Consultants to ensure our customers receive excellent quality service.

KrackTech, Inc. provides affordable service solutions to Personal, Home Office, or small to medium sized businesses by improving their performance and by assisting them in adapting to ongoing technology changes. We specialized in Onsite Services and Commercial / Residential Repair KrackTech, Inc. is a computer repair service. It was conceived in 2015. Today, our company employs Professional Certified Technicians and IT Consultants to ensure our customers receive excellent quality service.


Avatar for Window King

Window King

4.81(
365
)

Window King

4.81(
365
)
Customers say: Quick response
Recommended by 93% of Angi customers
Recommended by 93% of HomeAdvisor customers

Window King specializes in aluminum and vinyl replacement windows, including double-hung, bays, bows, and slider windows for both residential and commercial markets, as well as security and sliding doors - all from the top brands in the industry, and has served the Westchester, Fairfield, Five Boroughs and Bergen county for over 30 years. --- In a world full of horror stories and poor quality work, broken contracts, no-show schedules and poor quality, Window King has become a leader in "Customer Service Satisfaction". We feature vinyl, aluminum, wood, composite and fiberglass replacement windows, all available as bays, bows, casements, sliders and double hungs. We beat ANY written estimate and offer free estimates with no obligation.5 employees. Charges a flat rate. No travel charges. Ask about Angie's List. City of New York License #1171450, Westchester County License #WC-15985-H09, Rockland County License #H-09683-07-00-00, Yonkers License #3979, New Jersey License #13VH00055900 And Connecticut License #603035.Nassau County License #H0810890000. Additional DBA names: Window King LLC.

"Window King handled a one window replacement as though it was a big bucks job. Their response time, commitment, and team work was flawless. The installation is perfect and exceeded my expectation because of the outside work involved. Window King is the way to go."

James B on July 2018

Window King specializes in aluminum and vinyl replacement windows, including double-hung, bays, bows, and slider windows for both residential and commercial markets, as well as security and sliding doors - all from the top brands in the industry, and has served the Westchester, Fairfield, Five Boroughs and Bergen county for over 30 years. --- In a world full of horror stories and poor quality work, broken contracts, no-show schedules and poor quality, Window King has become a leader in "Customer Service Satisfaction". We feature vinyl, aluminum, wood, composite and fiberglass replacement windows, all available as bays, bows, casements, sliders and double hungs. We beat ANY written estimate and offer free estimates with no obligation.5 employees. Charges a flat rate. No travel charges. Ask about Angie's List. City of New York License #1171450, Westchester County License #WC-15985-H09, Rockland County License #H-09683-07-00-00, Yonkers License #3979, New Jersey License #13VH00055900 And Connecticut License #603035.Nassau County License #H0810890000. Additional DBA names: Window King LLC.

"Window King handled a one window replacement as though it was a big bucks job. Their response time, commitment, and team work was flawless. The installation is perfect and exceeded my expectation because of the outside work involved. Window King is the way to go."

James B on July 2018


Avatar for AJ Perri

AJ Perri

4.31(
1,531
)

AJ Perri

4.31(
1,531
)
Customers say: Super punctual
54 years of experience

For fast and exceptional service for all of your heating, cooling or plumbing needs, call us now: 732-333-3655! Since 1971, A.J. Perri has been proudly serving New Jersey homeowners and businesses across Bergen*, Essex, Mercer, Middlesex, Monmouth, Morris*, Ocean*, Somerset, Passaic*, Hudson*, Sussex*, and Union counties. With over 50 years of experience in heating, air conditioning, plumbing, and indoor air quality systems, A.J. Perri stands behind every installation, service and product with an unmatched 100% satisfaction guarantee. A.J. Perri offers you peace of mind and an established reputation for reliability, quality, and excellence in customer service. You can trust A.J. Perri to take care of your furnace, air conditioner or plumbing repair, service, or replacement. A.J. Perri can also help you with your heat pump, air handler, ductless split system, water heater or purification, sump pump, air cleaner, air filtration system, humidifier, and air ducts. Contact us if you have any questions about service in your area. Service offered 24/7/365. For more information: call or email us at info@ajperri.com. *Additional info: Not all services available in all areas. License# 19HC00103100, 36BI01256600, PA- PA126178

"This past weekend I had a bad experience. The short story is that an A. J. Perri technician diagnosed my furnace problem and wrote me an estimate for $1,600, parts and labor. It turns out my furnace had a different problem that required no parts and only 15 minutes of labor. Here are the details: This past Saturday my furnace stopped heating my home. I called A.J. Perri and they sent out a technician on Sunday morning. The tech ran some checks and concluded that my “inducer assembly” had to be replaced. Parts and installation would be $1,600. He said someone from the office would contact me on Monday and let me know when they could have the part. He also said that he couldn't be certain that there weren't other issues that wouldn't be found until the inducer was repaired. After the technician left I did some searching on the Internet. YouTube and Reddit were especially helpful. I discovered that the problem was that the condensate drain was clogged and water had backed up into the inducer assembly. The water prevented the pressure switches from detecting that the inducer was running and this prevented the furnace from starting. When I disconnected the condensate hose *2 quarts* of water drained out of the inducer assembly! This water was supposed to drain into a small pump unit on the floor that sends collected water to the sump. Over the years mold and algae had clogged the condensate trap and caused the backup. I disconnected all the hoses and removed the trap. I blew out the trap (making a mess) and confirmed that water would easily flow through it. I put it all back together and the furnace is working fine. The sad lesson here is that you can’t always rely on supposed experts. The good news is that the Internet can be your friend. Even more details: The original symptom was that the furnace would start up, the inducer motor would run for about 20 seconds and then it would shut off. This cycle would repeat every few minutes. Every few hours the furnace completed the startup cycle and then I’d get heat. Then it would stop heating for hours, and the indoor temperature would drop to the low 60s. What I learned from YouTube is that there are multiple stages for furnace startup. The inducer motor spins a cage that sucks in fresh air for combustion, and then pushes the hot gases through the heat exchanger and out the flue. Each stage in the startup has safety checks. The furnace will not ignite if the pressure sensors don’t detect that the inducer motor is working properly. Water is a byproduct of the combustion. It starts as a vapor but then condenses in the flue pipe and drains back to the inducer assembly, where it’s supposed to run through a hose to a pump that sends it over to my basement sump. The furnace is 14 years old. Apparently that’s long enough for mold and algae to clog the condensate trap and cause water to back up into the inducer. The 2 qts of water blocked the pressure sensor switches and so the furnace wouldn’t light. Final thoughts: For over 14 years I've had great experiences with A.J. Perri. They replaced my home’s original furnace and Air Conditioner units. They moved our outside A/C unit to the side of our house so we could have more quiet in the backyard. I had them come for periodic heating and A/C maintenance checkups. My impression is that they might cost a bit more, but they were reliable. I'm saddened that I need to post such a negative review."

Jeffrey P on January 2024

For fast and exceptional service for all of your heating, cooling or plumbing needs, call us now: 732-333-3655! Since 1971, A.J. Perri has been proudly serving New Jersey homeowners and businesses across Bergen*, Essex, Mercer, Middlesex, Monmouth, Morris*, Ocean*, Somerset, Passaic*, Hudson*, Sussex*, and Union counties. With over 50 years of experience in heating, air conditioning, plumbing, and indoor air quality systems, A.J. Perri stands behind every installation, service and product with an unmatched 100% satisfaction guarantee. A.J. Perri offers you peace of mind and an established reputation for reliability, quality, and excellence in customer service. You can trust A.J. Perri to take care of your furnace, air conditioner or plumbing repair, service, or replacement. A.J. Perri can also help you with your heat pump, air handler, ductless split system, water heater or purification, sump pump, air cleaner, air filtration system, humidifier, and air ducts. Contact us if you have any questions about service in your area. Service offered 24/7/365. For more information: call or email us at info@ajperri.com. *Additional info: Not all services available in all areas. License# 19HC00103100, 36BI01256600, PA- PA126178

"This past weekend I had a bad experience. The short story is that an A. J. Perri technician diagnosed my furnace problem and wrote me an estimate for $1,600, parts and labor. It turns out my furnace had a different problem that required no parts and only 15 minutes of labor. Here are the details: This past Saturday my furnace stopped heating my home. I called A.J. Perri and they sent out a technician on Sunday morning. The tech ran some checks and concluded that my “inducer assembly” had to be replaced. Parts and installation would be $1,600. He said someone from the office would contact me on Monday and let me know when they could have the part. He also said that he couldn't be certain that there weren't other issues that wouldn't be found until the inducer was repaired. After the technician left I did some searching on the Internet. YouTube and Reddit were especially helpful. I discovered that the problem was that the condensate drain was clogged and water had backed up into the inducer assembly. The water prevented the pressure switches from detecting that the inducer was running and this prevented the furnace from starting. When I disconnected the condensate hose *2 quarts* of water drained out of the inducer assembly! This water was supposed to drain into a small pump unit on the floor that sends collected water to the sump. Over the years mold and algae had clogged the condensate trap and caused the backup. I disconnected all the hoses and removed the trap. I blew out the trap (making a mess) and confirmed that water would easily flow through it. I put it all back together and the furnace is working fine. The sad lesson here is that you can’t always rely on supposed experts. The good news is that the Internet can be your friend. Even more details: The original symptom was that the furnace would start up, the inducer motor would run for about 20 seconds and then it would shut off. This cycle would repeat every few minutes. Every few hours the furnace completed the startup cycle and then I’d get heat. Then it would stop heating for hours, and the indoor temperature would drop to the low 60s. What I learned from YouTube is that there are multiple stages for furnace startup. The inducer motor spins a cage that sucks in fresh air for combustion, and then pushes the hot gases through the heat exchanger and out the flue. Each stage in the startup has safety checks. The furnace will not ignite if the pressure sensors don’t detect that the inducer motor is working properly. Water is a byproduct of the combustion. It starts as a vapor but then condenses in the flue pipe and drains back to the inducer assembly, where it’s supposed to run through a hose to a pump that sends it over to my basement sump. The furnace is 14 years old. Apparently that’s long enough for mold and algae to clog the condensate trap and cause water to back up into the inducer. The 2 qts of water blocked the pressure sensor switches and so the furnace wouldn’t light. Final thoughts: For over 14 years I've had great experiences with A.J. Perri. They replaced my home’s original furnace and Air Conditioner units. They moved our outside A/C unit to the side of our house so we could have more quiet in the backyard. I had them come for periodic heating and A/C maintenance checkups. My impression is that they might cost a bit more, but they were reliable. I'm saddened that I need to post such a negative review."

Jeffrey P on January 2024


Project Management Consultants LLC

No reviews yet

Project Management Consultants LLC

No reviews yet
36 years of experience

European craftsmanship and upstanding work in most home improvement and repair categories. No outsourcing, we do the work.

European craftsmanship and upstanding work in most home improvement and repair categories. No outsourcing, we do the work.


A&M PAINTING

No reviews yet

A&M PAINTING

No reviews yet
26 years of experience

Home improvement

Home improvement

...
Showing 1-10 of 1005
FAQs for new windows service projects in Dumont, NJ

Yes, bay windows add value to a home. They enhance the property by expanding the interior space and flooding rooms with natural light. Their unique three-panel design creates a stunning focal point that elevates curb appeal and modernizes living areas. This architectural detail increases both functional space and visual appeal, directly contributing to higher home resale value.

Yes, all window types have the potential to become part of a bay window configuration when modified correctly. The transformation involves reconfiguring standard windows into a multi-panel design that features a larger central window flanked by smaller ones. This process requires precise professional planning and custom framing to ensure durability, visual balance, and structural integrity.

Bay windows typically consist of three glass panels extending beyond the home's exterior walls, with a larger center panel flanked by two smaller ones. In contrast, bow windows are composed of four to six equally sized glass panels that create a gentle curve and do not extend as far from the exterior walls.

Bay windows cost more than standard windows because their expansive, multi-panel design requires additional materials and skilled labor. Their construction involves extra glass, specialized frame components that extend outward, and complex operating mechanisms. These technical demands necessitate precise engineering and multiple expert installations, thereby significantly increasing both material and labor expenses.

Bay windows cost three times more than standard double-hung windows because their design requires extra panels, expanded framing, and a more complex installation process. The advanced construction method increases material consumption and demands comprehensive expertise, while specialized window treatments further elevate expenses. This all results in a significant difference in overall project cost.

The Dumont, NJ homeowners’ guide to new windows services

From average costs to expert advice, get all the answers you need to get your job done.

  • A professional installing a new window sill

    Who replaces window sills? Learn when to hire a window repair company vs. a handyperson or carpenter and what affects cost

  • Worker caulking window to prevent leaks

    Who to call for window leak repair? Learn which pro fixes leaky windows, repair steps, and costs so you can hire with confidence

  • A woman relaxing in an attic with an egress window shining light

    Wondering who to call to fix an egress window? Learn whether to hire a window repair specialist, general contractor, or handyperson and what they do.

  • Windowpane with large crack

    Who do you call to fix a broken window? Learn whether to hire a window repair team or a handyperson, how pros work, and what affects cost.

  • A person caulking the exterior of a window

    Who to hire to caulk windows? Compare a window repair team vs. handyperson, see what pros do, and learn the typical rates for pros.

  • professional repairing an old window in a home

    Discover the average cost of window repair in 2025, including common repairs, window types, and factors that influence pricing. Learn whether DIY or professional services are the best option for your window repair needs.