Get matched with top appliance (major gas appliance) installers and replacers in Mendon, MA

"Harmond was very knowledgeable and understood this model. He looked at the situation and found that a service bulletin was issued for this model, which three previous repair in-person repair technicians had not told me about. He diagnosed the problem as requiring a new kit to replace the main PCB control board and the display board. He gave me the OEM part number. I highly recommend Neli Virtual Appliance Repair, my first virtual repair experience. Cost $35. I would do it again. Took 15-20 minutes to install app and pay at start of appt."

"Everything went smoothly and easily. Alex fixed my dishwasher by replacing the control board. He identified the problem quickly and resolved it just as fast. Everything is now working perfectly"

"Really nice job done! Rick had explained everything it may had potentially problem for the dishwasher (to me it is just cosmetic problem), and you would think he is really completist. He is also offer life warranty for the installation. I am very pleased how efficient he had done his job. He also helped to fix my in-sink erator and recycled my old dishwasher and refrigerator. I would have him for other appliance project in the future."

"

When they came out they told me the compressor needed replacing in the refrigerator and it would cost $800.00

plus labor. They also told me I needed 4 new igniters for my gas stove burners. I was quoted a price of $20.00 - $30.00

per igniter plus labor. It cost me $89.00 for the estimate on 8-31-2015. I was told they would contact me when the parts

came in .They came back on 9-16-2015 to repair the burners. I had been expecting a quicker return date. I don't see why it took over two weeks to get 4 igniters. The igniters were replaced quickly and I was charged $181.25 for parts and labor. It seemed to me to be a little on the high side but I didn't question it at the time. When I looked at the receipt later to figure out how much I was charged  for parts vs. labor the receipt was not itemized so I could not tell. My main complaint is that less than two weeks later on

9-27-2015 one of the burners failed to lite again. I would not expect that to happen. I will

have to contact them and hope I don't get charged again to come back out and look at it again. If I do get charged for another house call I will not be using them again.
"

Here at Ray Progress HVAC, we believe business is not just business. We provide friendly, bilingual, and highly trained technicians to meet customers' needs. \nWe go through every process with our customers so they are happy and there are NO misunderstandings. We have several technicians so if you call Ray Progress HVAC we will be there the same day. We have very flexible schedules and will work whenever a customer needs our services. We have a $125 service call fee where we come to your home diagnose the problem and explain it to you. We will make you aware of the broken part and explain the part's job along with the cost. If you decide you would like our experienced technicians to repair your product, the $125 is waived, and we go on to negotiate the price with you. Thank you for choosing Ray Progress HVAC!

"Given the complexity of the project, it went as smoothly as something like this can go. Hagit developed a very functional and attractive design based around an island that would seat 3, along with a variety of cabinetry. She was very patient when we wanted a number of adjustments. She accompanied us to pick out counters and backsplash, and always seemed to have good ideas for selections according to our tastes. Brian mapped out the engineering, which included moving a support beam, together with an engineering firm. He also mapped out a three-month schedule with the various subcontractors the firm uses, like the plumber, electrician, plasterer, counter people, floor people, etc. They all had lots of experience with this kind of work, and in working with KCF. Brian worked hard to ensure that new wood flooring would match well with existing flooring just outside the new kitchen. The KCF team also took a lot of care to set things up in our condo to create barriers to minimize dust and dirt, and try to ease our inconvenience; they even loaned us a microwave to use in our temporary kitchen in the basement. For the most part, subs showed up as scheduled, and did good work. KCF also coordinated all the town inspections. There were only a few glitches--the biggest one was when the tiles for the backsplash arrived broken, and it took some weeks to get replacements. The tile outfit wasn't very responsive, and seemed not to care much. But KCF kept on with all the other work, and the tiles were finally put in pretty much near the end. We have used the kitchen for a couple months now and love it. The design and craftsmanship all worked well. Going through a kitchen re-do is never a pleasant experience, but KCF made it as painless as possible."

"Installed a gas dryer. Quick, professional and reasonably priced."

"I've used United Remodeling for numerous renovation projects and cannot recommend Alessandro Ferreguetti and his professional crew highly enough.  For a "makeover" of our suburban colonial-style Weston home in preparation for putting it on the real estate market, United did complete exterior and interior painting, repairs of wood flooring and mouldings, repairs of wooden gutters, installation of new gutters, and numerous other small jobs.  This was a large project (a 9000sf main house and 2 outbuildings), and the United Remodeling crew did whatever it took to make the house look good - as a result the entire estate showed beautifully, and within 3 days of going on the market it sold to the highest bidder for more than the listed price.
I was so happy with United's work on our suburban house that I engaged them again to do a number of renovations for the contemporary-style Back Bay condo to which we subsequently moved.  These highly varied projects included replacement of the entire HVAC system (including ALL of the ductwork behind the walls and ceilings), installing two sets of stacking washer/dryers, renovating a loft bedroom, installing new light fixtures, and building an entirely new outdoor roof deck, in addition to more typical painting, wallpapering, and floor refinishing work.  To succeed, many of these projects required patience, frequent communication, and creative solutions from Alessandro to overcome the tight spaces and unexpected obstacles that are so frequently encountered in older urban buildings.
In the course of these projects, I have personally come to know and trust numerous United Remodeling employees and subcontractors in addition to Alessandro himself, including carpenters, painters, paperhangers, floorers, roofers,  plumbers, electricians, HVAC specialists, metal workers, and other trades people.  Every one of them has been conscientious, courteous, and driven to produce quality work.  To cite just one example, one of our rooms was slightly expanded by removing a non-structural wall, which required laying additional oak hardwood flooring.  The easy solution would have been to lay a simple threshold across the old border and lay new floor boards in the newly created floor area, but that would have made the room expansion obvious.  Instead, and on their own initiative, the United crew painstakingly removed random lengths of the existing tongue-and-groove oak floorboards and installed the new tongue-and-groove floorboards in such a fashion that it is impossible to distinguish the border between the original and the new flooring.  The result was a larger and more beautiful room than ever.
Now, isn't that the kind of attention to detail and pride in the finished product that one would seek in any contractor?"

"Very good experience working with Vladimir, he came on time and they fixed our appliance problem quickly."

"Went well. Technicians need to be trained to perform safety procedures for appliances maintenance checks. Making sure appliances being worked on are properly functioning and safe to use for customer. The customer should not be telling or begging technicians to perform safety checks on appliances. More training is needed please. Thank you for your service."