Get matched with top drain clog or blockage clearers in Norton, MA

"Patrick Maclary of Drain Frog is a true professional, delivering top service promptly and courteously. He fully explained the nature of the service to be performed as well as the price Drain Frog would charge. I would recommend Drain Frog to my friends and family without reservation."

"Preston from Neighborhood drains was the 3rd drain company that came out to my home for the vent clog in my roof drain. They didn’t even go onto my roof where the problem originated. He went up on my roof and cleared the vent drain and the blockage cleared out. If you have a drain clog give Neighborhood Drains a call. Preston is a true professional, honest, and reasonable rates. I’ve had a lot of work done around my house having hired many different companies and he was simply the best guy that I’ve encountered. "

"Our kitchen sink was clogged and we were unable to use it or our dishwasher and contacted several plumbers none of whom were immediately available until we reached Budge It Drains. Within 90 minutes Steve showed up and we got our kitchen back shortly after. He was professional, personable and efficient. Overall an excellent representative of the company and I would highly recommend Steve and Budge It Drains."

"I was very impressed with how he explained everything, performed the work and kept us informed with what was going on. I was able to watch everything and he followed the outline he gave us exactly. He was very knowledgeable and even offered much advice for a second house of mine that has a failing septic system. See their web site which lists all the types of work they perform with all the information that he was telling me personally. I would definitely use him again and certainly recommend him to anyone else. Note, that he will give a discount to Angie's List members, in our case 15%. The $400 charge, listed somewhere above, does not include the discount. <br />   <br /> The following is a detailed account of what Jim did at our house for, I think, a typical badly blocked sewer line. <br /> We contacted Anchor Sewer and Drain Cleaning in order to fix an apparent blocked main sewer line exiting the house. <br /> The blockage was causing the water to back up and come into the cellar via holes in the vent pipe. The house was built in the 1930's so the pipes are very old and fragile. <br /> We called about 8:30 AM and were pleasantly surprised that he could come that same day at 11:00 AM. He arrived on time at 11:00 AM. <br /> Prior to the work being performed, he gave us prices for fixing the problem based on a couple of possible scenarios, dependent upon what he might find. <br /> He also explained what each solution would entail and how long it might take. (3 hours in our case) <br /> He was very careful getting the old main cap off the sewer line, which was stuck on, without breaking any of the old pipes. <br /> Once access was obtained he used a specialized hose to pressurize the line to try to "blow out" any clog. However, this was not enough to fix the problem. <br /> The next step was to use the electric "rooter" to cut through all the years of old sludge built up in the horizontal pipes and to cut any roots that might have gotten in over the last 80 years (which, it turns out we had). The rooter is a 200 pound machine that he had to get down the steep outside cellar stairs. It is an electric powered device with rotating cutters that clean the sewer and literally cut roots. The rooting was necessarily a slow process in our case as it was hitting blockages along the way that required slow going. He also had to negotiate joints in pipes that caused the machine to hang up. In the end, he was able to root the whole 90 feet to the town sewer. <br /> Jim indicated that he always uses his "scope" to verify the success of the rooting process, which may not be performed by other companies, without an additional charge. This is a great device that clearly shows the inside of the pipe visually on the color screen (6" x 8" maybe?) of a portable device connected to the scope cable. In our case it showed a (now) very clean pipe with the remnants of very fine roots in the first 15 feet of pipe. (These were attended to last). The scope software also displays the current distance of the scope head to the house. Using the "scope" he was also able to identify a problem with the town's sewer that was not emptying properly and told us to notify the town. <br /> The last step was to explain how to use a chemical, periodically, to kill the cut roots and to prevent future root growth. This is simply a foaming chemical that is applied through the toilet. He gave us the first treatment which we immediately applied. <br /> Again, I recommend Anchor Sewer and Drain Cleaning for anyone else. <br />"

"Your company is outstanding and we are extremely happy. Our technician Garett was prompt and polite. He was very knowledgeable and explained things about our situation that we were totally unaware of. Potentially saving us time and money down the road. Garrett was attentive to our to our needs and was very careful of our pets as he was working. We would definitely use Beacon Drain Service again."

We pride ourselves on reliability, communication, integrity, and quality work. We are experts in our trade. We look forward to earning your business! Please call 978-941 5561\nFor all drain and sewer services

"I had several issues, toilet, sink faucet and drain replacement. Also, I had some issues with the drain configuration in the basement, Nick took care of all of the problems in a very efficient manner and left each area clean. I would hire again."

"Suddenly, my basement drain was backing up! A friend tried to unclog it, but to know avail. He thought it might have something to do with the sewer line that ran to the street! Right away, I started seeing dollars signs. So, I went on Angie's list and saw the reviews for HL Bowman. Because they were so highly recommended, I went to their website. Immediately, there was a person named Tiera to chat with. I explained my situation and she asked me a few questions. She told me she would have some one call me. I asked if it would be today because there was sitting water in my basement and I was afraid to even flush a toilet! She said it would definitely be today! Within two minutes of concluding the chat, my phone rang. A very courteous person assured me that he could get someone out there today! It was about 8:30 am and he told me that he could have someone by this afternoon and they would call me before they arrived. Around noon, a young man named Clayton called and said he was on his way. When he arrived, he went to basement and checked out the situation. When he came up he said that he thought the clog was in the pipe along the wall going out to the sewer. He brought in a machine and spent approximately and hour and a half trying to open the clog. He then told me that he had called another person from the company to bring a larger machine. Then, Corey showed up with a huge machine and Clayton left to go to another job. Corey was down there for about another hour and half. The machine was much louder than the first one. I was really worried about the cost and the fact that it was taking so long to open. I pictured having to have my lawn torn up and imagining what that would entail, not to mention the cost. Suddenly, he appeared and I tried to prepare for the worst. He looked at me with a smile on his face and said, "it's open". I was so surprised, I am sure he saw the relief on my face. 'He explained that he had to go out 75 feet to the street, and the that the clog was because of tree roots which he grinded through. I knew this machine was probably more expensive to use than the smaller one. So I braced my self and I asked him what the total charge would be! When he told me, I was shocked as that even included the $70 service fee which included up to 45 minutes to diagnose the problem and give me an estimate. But, because Corey had to bring a bigger machine and stay longer than Clayton had estimated, I was sure it was going to be astronomical. Corey said he would figure it out! When he told me the price I could hardly believe my ears. It was half of what I had anticipated! I was thinking about $1,000- $1200! I can't begin to explain how relieved I was.. I would like to say both Clayton and Corey could not have been nicer. Very mannerly, friendly, and polite. When Corey left, everthing was cleaned up! No sewage anywhere. And another thing that I thought was extraordinary, was how unafraid they were of my two pittbulls. They petted them and Corey even told them to stay when they tried to follow him out the door. LOL! And they, listened! I have found my company should I need any future help. It's good to know that there is someone out there who is professional, knowledgeable, and who charges fair prices. It wasn't cheap, but I believe it could have been a lot higher. Family members also thought the price was good. It started out as a bad day, but I had a smile on my face when Corey left!"

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"It was cleared within a half hour. The technician was extremely polite and he left everything as neatly as he found it. The price was excellent and he worked quickly. In the past when I had plumbing work done it always ended up more than I thought and there was alway a lot of cleaning up to do after they left. I was afraid to call anyone I felt plumbers were so hard to get to come to you house and you were at their disposal . Right from the start the main office was very responsive they offered to send someone the same day I chlose to have them come the next morning. The technician called before coming and showed up on time. He was very polite identified the problem and work extremely quickly and cleanly leaving everything very neat. After this experience I will never dread calling a plumber. I am definitely added this company to my phone to call for emergency plumbing The price I paid was $235.00 much better than I exspected"