Top-rated interior trim and decorative moldings installers.

Get matched with top interior trim and decorative moldings installers in Pen Argyl, PA

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Interior trim and decorative moldings installers in Pen Argyl

Avatar for Thomas Kitchens Inc
Thomas Kitchens Inc
4.9(
37
)
Interior Trim and Decorative Moldings - Install

Serving Pen Argyl, PA and surrounding areas

In business since 1960

Free estimates

"The designer was always very attentive when I contacted him and would answer (in detail) the numerous questions I would pose. The two contractors who showed up at my home were just as professional and pleasurable to work with. over the course of the week they were coming to my house, any ideas or suggestions from either side were always hashed out as they would materialize and by the end of the project, the end project was essentially exactly as I'd constructed it in my head. The only slight con to the end result was more-so of my own doing than anyone else's, where the light fixtures I'd purchased for the replacement did not come with rods, so a couple of the pendant lights hang crooked."
Full Kitchen Remodel
Full Kitchen Remodel
Full Kitchen Remodel
Full Kitchen Remodel
Recommended by100%of homeowners
Berger's Table Pad Factory
4.8(
1,345
)
Interior Trim and Decorative Moldings - Install

Serving Pen Argyl, PA and surrounding areas

In business since 1983

Free estimates

Credit card accepted

"Within days of purchasing the deal, I received the instructions and paper to draw my table templates. The table has 2 drop leaves plus 2 additional leaves that can be inserted in the table. The templates were pretty easy to draw. The finished pads were delivered in a very short time. They fit the table and each of the 4 leaves perfectly and magnetically lock together to keep them aligned when on the table. A year and a half later, I still love these pads."
Recommended by93%of homeowners
Avatar for Bond Home Remodeling
Bond Home Remodeling
4.7(
71
)
Interior Trim and Decorative Moldings - Install

Serving Pen Argyl, PA and surrounding areas

In business since 1990

Free estimates

"This was the third time I used Mark and he did a fantastic job. The bathroom was a challenge because the space was awkward but needed a shower added. Not only did he find a solution, but it looks great and really improved the value of the property. He did work throughout the house and even redid his work on the front porch railing after a brief conversation about making it look better -- the way he redid the work went above and beyond what I expected and really made everything look so much better. I keep going back to Mark for his work and highly recommend."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+8

Recommended by93%of homeowners
Avatar for Central Lending Svc Inc dba Credit Central
Central Lending Svc Inc dba Credit Central
4.8(
72
)
Interior Trim and Decorative Moldings - Install

Serving Pen Argyl, PA and surrounding areas

In business since 2003

Emergency services offered

"We had to keep on top and make calls
because a week or more would go by
and we were not getting updates. The re-fi
went through and it worked out well.  Just
thought the communication could have
been a little bit better.
"
Additional Photos
Recommended by100%of homeowners
Avatar for CM Contracting
CM Contracting
4.6(
41
)
Interior Trim and Decorative Moldings - Install

Serving Pen Argyl, PA and surrounding areas

In business since 2012

Free estimates

Emergency services offered

"They really did an exceptional job. The deck rebuild was a complicated job. The deck wasn’t built correctly originally so CM Contracting had to extensively modify the structure. They really did a great job. The deck looks really great, and I think I now have the strongest deck in the Lehigh Valley. The chimney work was a big concern of mine going into the job. The previous owner of the house let the chimney cap rust, and the rust stains ran down the Dryvit. It really looked bad. Chris worked with his paint supplier to get the color to match perfectly. He had Sherwin Williams out to my house on several occasions because Chris wanted it done right. It far exceeded my expectations, and now looks perfect. The caulking and power washing all went well too. I would highly recommend CM Contracting. Chris is very responsive. We would communicate often via phone or txt. His crew is great too. Very polite and friendly."
Completed Siding
Completed Siding
Completed Siding
Siding
Siding

+147

Recommended by96%of homeowners
...
Showing 1-10 of 72
FAQs for interior trim and decorative moldings installation projects in Pen Argyl, PA

Installing crown molding can be challenging, depending on the material and your skill level. Lightweight materials like polystyrene and softwoods are easier for homeowners to install themselves, offering a cost-saving option. However, heavier materials like hardwoods and plaster are difficult to work with and require professional installation to achieve a high-quality result. Precision is crucial in measuring, cutting, and fitting crown molding, so hiring a professional ensures the best outcome.

Crown molding is available at various price points, ranging from $1 to $30 per linear foot, depending on the material. This wide range offers options for every budget. Affordable materials like MDF, PVC, and polystyrene provide cost-effective solutions, while premium materials like exotic hardwoods or metal offer a luxurious appearance at a higher cost. Regardless of your budget, you can find crown molding that enhances your home's aesthetic.

Crown molding is installed by professional finish carpenters or painters who specialize in detailed trim work. These experts possess the necessary skills and tools to ensure precise measurements, accurate cuts, and seamless installation. By hiring a professional, you can achieve a flawless finish that enhances your home's aesthetic appeal without the risk of common DIY mistakes.

Crown molding can be installed in various areas of your house to add elegance and architectural interest. It is commonly used where walls meet the ceiling, but you can also place crown molding around doors, windows, mirrors, and atop cabinets. Installing crown molding in these locations enhances visual appeal, creates a cohesive design, and adds a touch of sophistication to your home's interior.

To determine how much crown molding to purchase, start by measuring the length of each wall where you plan to install crown molding and add the measurements together to determine the total linear feet required. Purchase an extra 10% of material to account for waste from cutting angles and to ensure seamless joints by using full-length pieces when possible. Including additional material helps avoid shortages and ensures a smooth installation process.

For a professional crown molding installer, this task takes about 1 to 3 hours per room, depending on size and complexity. Factors like the material, design intricacy, and number of corners can affect the time. If you're doing it yourself, expect it to take longer as you get the hang of measuring and cutting precise angles. Advanced measuring and planning or hiring a pro can help the project go smoothly.

The Pen Argyl, PA homeowners’ guide to interior trim and decorative moldings installations

From average costs to expert advice, get all the answers you need to get your job done.