Get matched with top sewer main install, replace or repairers in Cambridge, MA

"Called right away and got some information. Plumber came out the next morning and was able to complete the repair in a few hours. Definitely recommend Rezysave"

"They did a great job. They were able to use a small pump to pump the waste water out before replacing the broken pump. The other company wanted us to pay for a pump truck costing $600 before giving the estimate."

"Outstanding service and professional installation!!"

"Repaired/replaced a faulty shower valve. Efficient and friendly service, not outrageously priced. Will definitely call again him when I need a plumber."

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"Two men, Jerry and Tommy, arrived on the morning of May 19, 2017 to install the system. Tommy dug a hole on one side of the house, poured a concrete foundation in said hole, and also set up metal tubing, which created a stand on which the condenser sits to protect it from runoff. Meanwhile, Jerry was inside, drilling holes through my bedroom and dining room interior and then exterior walls for the refrigerant pipes which run from the condenser to the air handlers. He mounted each air handler high up on the wall. There was also electrical work performed to connect the units to the main panel in the basement. The whole job took several hours. Both men worked quickly and efficiently. At the close of it, Jerry presented me with my remotes and instructions, and showed me the basics. I used the system for the first time just a couple of nights after installation. The first night (it was the start of a heat wave) the air from the system was cool-ish - tolerable, but not quite as comfortable as I'd hoped - but I was still uncertain about the controls so I didn't tab down the temperature. The second night I did tab down the temperature, and that's when I found out that, though the fans and vanes in both air handlers worked, the cooling mechanisms did not. Considering the amount of money I'd just spent i was more than a little upset. Visions of law suits danced in my overheated head that night. I called the next morning. Jerry came out that day and diagnosed the problem (something to do with the solenoids, or maybe it was the thermistors). In any case, he did fix it, and this time, it worked as designed, and has done so ever since. I should add that NETR offers a service contract. Despite the added expense - for me, 234.99 a year for 3 years (the annual rate is fixed for that period, plus I get a 5% discount) - it makes total sense to have this complex system undergo periodic maintenance. I will pay the total at the time of the first inspection, in 2018."

"Boston Plumbing and Heating Solutions responded immediately and was able to come to my house within an hour and fixed the leak. They were courteous and cleaned up after they were done. I would hire again."

"We have used Dave as our plumber multiple times. Some projects were tankless water heater install and servicing, bathroom remodel , also he did all the plumbing for our addition including kitchen/laundry/ bath. Always reliable with good communication. Will continue to use Dave!"

"MAC HVAC and Air Conditioning was an excellent experience. They were professional, and polite. I needed an air conditioner installed through the wall, so they had to order it. Not in stock. They kept us informed up to actually coming here to perform the install. They installed the A/C without a hitch cleaned up and it was nobody was here. I highly recommend their services."

"They came and did the work that was necessary. It was an emergency situation where the internal sewer pipe had cracked creating an unhealthy environment for everyone in the residence."